Epson P9570 & P7570 Unboxing, Assembly, & Setup Video

Рет қаралды 38,667

4 жыл бұрын

How to set up your new Epson SureColor P7570 or Epson SureColor P9570 Photo & Fine Art Printer. See it unboxed, then see the stand assembly, lifting the printer onto the stand, ink installation, paper loading, basket assembly, and see software install on both Windows & Mac computers. The Epson P9570 and P7570 printers can print on photo papers, canvas, backlit films, fine art textured and watercolor papers, and many many more types of media. These printers are the gold standard for fine art & giclee printing.
www.dtgweb.com
Based in Tampa, Florida, Digital Technology Group, Inc (DTG) was founded in 1998 by current owners Scott Erickson and Mark Killen. Both Mark and Scott were early pioneers in the world of digital imaging & printing technologies and have grown DTG into one of the most successful and well respected companies in the digital imaging industry. Large manufacturers including Canon, Epson, HP, Hasselblad, Hahnemuhle, Sawgrass, and others have chosen to partner with DTG in providing our customers with the latest, cutting edge imaging solutions.
#epsonp9570 #epsonp7570 #printersetup

Пікірлер: 11

@garybarker4164 3 жыл бұрын

Here is a quick reference guide for our Epson SureColor P7570/9570 Unboxing and Set Up Guide video. If you need to refer to a specific section of our video just click the time stamp for that section. 0:00 Overview 3:15 Unbox & User Guide 4:32 Stand Box Contents 5:02 Stand Assembly 5:42 Unpack Printer 7:02 Preparing to lift printer in place 8:23 Placing printer on stand 9:53 Securing printer to the stand 10:21 Basket Assembly 14:10 Basket Assembly Continued 15:25 Basket Assembly Conclusion 16:02 Install Paper Guides & Remove Blue Tape 17:29 Power On & Connection Overview 18:45 Initialize & Install Inks 21:36 Initialize With Inks (and grab a cup of coffee) 24:28 Operating Your Printer 38:15 Basket Functionality 39:47 Downloading drivers, software & updated firmware (for MAC) 47:39 Downloading drivers, software & updated firmware (for Windows) 55:03 Final Thoughts

@jaimeduncan6167 3 жыл бұрын

Thanks, very useful.

@dtgweb 3 жыл бұрын

Glad it was helpful!

@donfeight2967 3 жыл бұрын

In the owners manual it says not to tip the unit more than 10 degrees after the ink cartridges are installed to avoid spilling any ink. I have to get this down some stairs to my studio, can I tilt it more than 10 deg without any ink installed?

@dtgweb 3 жыл бұрын

Sorry for the delay Don. Yes, you can tilt it more than 10 degrees if there is no ink at all installed in the system including in the plumbing. Meaning, you haven't done the initial ink installation.

@donfeight2967 3 жыл бұрын

How do you determine ink usage in ml per print. I could do it on my old printer but don't see a way on the P7570.

@dtgweb 3 жыл бұрын

Hi Don. Are you Mac or Windows based? If you are Windows, there is a software Utility that you can download from Epson called the LFP Accounting Tool. You can access it from the Support tab of our product page here. www.dtgweb.com/epson-surecolor-p7570-standard-edition-printer-1.html Unfortunately, if you're Mac based there is no such tool. Generally speaking, I tell our customers that in a typical "heavy coverage, dark image", the printer will use around 1.5ml of ink total per square foot of printing. This is generally on the high side but I like to play it safe from a cost stand point.

@donfeight2967 3 жыл бұрын

@@dtgweb Thanks! I do have Windows so I'll give that a try. I generally I only print my own work but wanted to help out some other artists in my area.

@dtgweb 3 жыл бұрын

Great and you're welcome! Feel free to check out our Epson paper and canvas options for the printer at dtgweb.com.

@TerrysClimbingBlog 3 жыл бұрын

any issues with the printer yet? i was looking at ordering one, but after seeing some bad reviews.

@dtgweb 3 жыл бұрын

Hi Terry. We've had 2 demo units to date and have sold a good amount of both p7570 and p9570. Very solid so far, especially in terms of nozzle reliability. We've had 1 customer with what I would call a lemon, but it has since been rectified by Epson. My only real complaint so far would be how the Epson Media Installer software works and integrates with the printer. If you have one computer, 1 printer fine. But when you have one or more printers and computers printing to these, then you have to manually update every local workstation to stay current with new media types. Wish it would automatically push the updates to all computers/drivers.