How to replace a 2nd clutch transmission fluid pressure switch, done by a non- mechanic, in under hour after some practice.
Пікірлер: 171
@kyles7696 жыл бұрын
Thank you so much for the video! Fixed my wife's car with no issues...once I had the correct tools! You are my hero. Video was extremely helpful.
@ccmixtapes19776 жыл бұрын
By far the biggest pain in the a** is getting the filter box out of there and then back in... At least on my '09 Civic, there is NO room. I ended up sawing off one of the threaded bolt holders on the base of the box (rear engine side, no big loss). The switch on the thing just above the sensor has a pinch pullout. Very helpful vid, thanks a ton! Fixed for $17 - I also bought the part on eBay.
@freetrvl215 жыл бұрын
Haha! Yes that filter box took me hours to remove and put back
@ThurmondGoins5 жыл бұрын
Bro I though the civic was easier...sorry you had a tough time.
@iepilart37447 жыл бұрын
Thanks for this video! I repaired a 2009 CR-V EX-L AWD AT. I excluded 1 step though, in that, I didn't need to unscrew the two screws where the battery was to remove the battery shelf. Once I removed the air filter box and hose, I had access to the switch.
@iepilart37447 жыл бұрын
In addition, be prepared to enter your anti theft radio code into the radio to play it after the battery is reconnected to the engine. This code can be found on a card (business card sized) within your owner's manual. Good luck!
@msarhsh4 жыл бұрын
same model. need to change it as yesterday the check engine indicator has blinked
@andrewhuang4ever895 жыл бұрын
Original $70 you just need to remove intake hose and use 22 socket to remove this pressure switch out ,thanks for the information bro
@ThurmondGoins5 жыл бұрын
Sorry if I lead you on a goose chase, I'm a creator who had a problem. I am glad you got it fixed.
@mdub31235 жыл бұрын
Hello Andrew. You serious, just remove the intake hose?
@andrewhuang4ever895 жыл бұрын
Yes juat remove the intake house and use socket 22 to replace it, i am a mechanic
@ThurmondGoins5 жыл бұрын
Yeah thats much quicker, no prob on the info.
@BarackBoxen6 жыл бұрын
Followed your steps and replacement was a breeze for a CRV-EX 2.4L engine. we had the same code and the D light was flashing, this cured the issue and vehicle is also shifting smoother as well. Thanks for your post.
@marcelolenarduzzi40665 жыл бұрын
Could you please inform the part number for 2nd switch(upper in AT) for CRV 2008 2WD AT 2.4? The P/N is 28600-RCR-004 or 28600-RCL-004?
@arturoramossincel25665 жыл бұрын
Thanks a lot for the video. Yesterday I got the code P0843 in my CRV 2009. Right now I'll buy it in Autozone and do it today!!
@ThurmondGoins5 жыл бұрын
No problem, good luck...
@ThurmondGoins5 жыл бұрын
Make sure you put it back together correctly and your DIYrific.
@taterlysaladman93775 жыл бұрын
If Autozone or Advance has it, you got lucky. Mine did not, best to get at amazon or Honda dealer.
@arturoramossincel25664 жыл бұрын
@@taterlysaladman9377 Sorry for late reply. I bought at yonk yard for $15 dlls, but after 11 months it failed again. I will now buy it new :)
@pgl58336 жыл бұрын
Very grateful for this video. Used it to successfully repair our 2009 CRV. Thank you!
@christopherperkins68375 жыл бұрын
Repaired my 2010 CRV THANKS FOR THE VID
@ThurmondGoins5 жыл бұрын
Your welcome.
@michka90925 жыл бұрын
Thank you for your video! I lucked out and it ended up being a severed wire to the sensor. Some solder and electrical tape fixed it right up.
@ThurmondGoins5 жыл бұрын
Skills!!!
@golfmanmatt2 жыл бұрын
Mine as well. Might be a good idea to check the wiring before you run and get the part. Mice love it right there on top of the trans
@clifflawton46897 жыл бұрын
OK.. did exactly as you presented... I was so happy to get it back together.. Much harder than you put in video.. I have a brake union box in the way.. But got it done. only ONE problem-- it didn't make the check engine light go off, and the trans doesn't shift into high gear still. I am HOPING that by driving a bit it will go off and trans will shift.. My FIXD computer keeps giving the same code even though I FIXED the issue with a new Sensor...
@ThurmondGoins7 жыл бұрын
Cliff Lawton Autozone can cut the light off for you.
@ThurmondGoins7 жыл бұрын
Sorry about the complications, it was a bit tough.
@clifflawton46897 жыл бұрын
Thx Thurmond... I use my van for picking up people for church, and really need it.. Can't afford a big Trans repair, so was glad to see your video.. after a grueling 3 hour repair, I was really discouraged that the new Sensor installation didn't do a THING to fix the problem.. STILL won't shift into HIGH gear.. Yet the code is P0843, and you along with other videos say the same thing.. I drove it this morning, but the RPM's are high at 55 to 60 MPH. Any suggestions? I want the light to go off, but more I want it to shift into high gear...thx!
@ThurmondGoins7 жыл бұрын
I am unsure about the problem I have CR-V. I do have an issue when going in reverse but the transmission is switching through all gears. maybe tighten it up. I actually went through the whole process 2x atleast.
@margretecheverria7 жыл бұрын
Anybody got a part number?
@AdhamMGhaly7 жыл бұрын
I appreciate the huge effort put into making this video. Well done Sir
@ThurmondGoins7 жыл бұрын
+Adham Ghaly can you explain the error you found?
@AdhamMGhaly7 жыл бұрын
Thurmond Goins I am terribly sorry I meant to write "effort" but my autocomplete sucks :D Edited the comment already :)
@ThurmondGoins7 жыл бұрын
+Adham Ghaly lol
@johnmccane30762 жыл бұрын
Thank you) I have the same problem in my Honda CRV 2008. Guess that I can fix it after watching your video.
@mooseff5 жыл бұрын
Thanks fot the info. I was hoping I do diy this repair! Looks simple enough!
@ThurmondGoins5 жыл бұрын
Good luck, public lift would help much more and save time if you ask me.
@sunnikool17 жыл бұрын
Perfectly composed video. Visual instructions were great. Helped save $$$. Thanks a bunch mate.
@ThurmondGoins7 жыл бұрын
RunaRun I am glad check out more of my videos sorry no more car videos up yet. Thanks for the props.
@mkrp47 жыл бұрын
I use battery terminal cap (found near the tire/battery store) to cover negative terminal if both are exposed (before removal of the battery clamp shown on video)
@dimitrijms77 жыл бұрын
What's the part number
@ThurmondGoins6 ай бұрын
From what I saw you could actually go from beneath the car to access it. But I def don’t suggest that way if you can’t put it on a lift.
@ltlpaa29736 жыл бұрын
You can get these pressure switches much cheaper on eBay. I paid $13 for the 2nd clutch pressure switch and $18 for the 3rd clutch pressure switch (99 Honda Accord EX, 2.3L, 4 cylinder). They work just fine.
@kevctrl6 жыл бұрын
Hey could you describe what was your problem. My car does not have any code but you can feel the hard shift from 1-2 gear.
@joehumeas71965 жыл бұрын
I have a 2008 Honda Civic and I believe the 2nd clutch and 3rd clutch pressure switches are the same switch? 2nd is on top and 3rd is below correct?
@christianmedina2335 жыл бұрын
Joe Humeas so 3rd gear is the bottom switch?
@joehumeas71965 жыл бұрын
Christian Medina The codes that I had were P0847 and P0756 (2008 Honda Civic LX). After research, I found that I needed to replace the 3rd gear/clutch switch. From videos and reading, this is on the bottom, under the car. Also, after calling the dealership, both switches are now the same part # 28600-RPC-004. I was going to use a knock off part but then I ended up using a Honda switch after recommendation. It was $55 which is annoying but replacing it was pretty easy. It’s been about 2 weeks and my car seems to be ok now. There were some shifting issues at first but I think my car had to re-learn the new switch. Good luck
@christianmedina2335 жыл бұрын
Joe Humeas thank you for the info. The code I’m getting is “ P0848”. I was told by the smog people it was a transmission code and it was for 3rd gear. I called the Honda dealer and they had the top and bottom pieces for $80 a piece. So I’m guessing I buy the bottom piece for under the car and replacing it?
@yt12345671005 жыл бұрын
thanks for VDO, good job.. like it.
@CornyRoll4 жыл бұрын
Thanks! All the other vids are for the 1.8 and 2.0 is different!
@ltmaddog7736 жыл бұрын
On my 2008 Honda Accord, I replaced this and still getting error code. Took to dealer who said this (from the above video) is the third clutch switch. Left replaced one as is and used the old one (which was still good) to replace the second clutch switch which is located on the right side of the motor. Only needed to loosen intake hose to replace. Problem fixed. Good video but everyone should verify the specifics of which sensor is which for their specific model.
@ThurmondGoins6 жыл бұрын
My apologies but I purchased a second clutch and put it in that spot and have no problems since.
@marstotalchaos47355 жыл бұрын
So how do you know which is the one to be replaced? Will the code scanner specify that?
@rubenmartinez63505 жыл бұрын
Thurmond Goins have you thought of changing the tittle on your video ? I did this exact same job on my car yesterday and still have the same code. It’s cool you made this but has proven to be misleading because of the tittle .
@taterlysaladman93775 жыл бұрын
Third clutch sensor is on the bottom of the Civic. This is the SECOND sensor. In the 2009 Civic it's 28600-RPC-004. Maybe you guys are all talking about different models? Seems to be some saying this is a CRV. The Civic in other videos seems to be mounted the opposite direction.
@taterlysaladman93775 жыл бұрын
@@marstotalchaos4735 DTC P0843: Open in Transmission Fluid Pressure Switch A (2nd Clutch) Circuit, or Transmission Fluid Pressure Switch A (2nd Clutch) Stuck OFF
@blank44253 жыл бұрын
Great video thank you for posting
@brandonpathic70713 ай бұрын
Sorry to bug. What part number did you use? Im having a hard time finding the right one
@ramonamoros8174 жыл бұрын
Hi Thurmond. I have a 1999 honda accord ex vtec 6. My engine light on ad 4d light flashing. Could that be the problem with my car? And when I put it on reverse and into drive makes a clunk noise. I plan to put what you showed on the video. Need help.
@ThurmondGoins4 жыл бұрын
That clunk issue may be a transmission problem ran into that problem trying to tow a uhaul.
@ThurmondGoins4 жыл бұрын
Take it in to honda or your Auto repair shop
@ThurmondGoins Жыл бұрын
sorry it took so long to reply. but I am not a mechanic I do not know the answer to your problem but I hope your figured it out and saved yourself money doing it.
@janice73597 жыл бұрын
Love the disclaimer
@ThurmondGoins7 жыл бұрын
Janice I had to be sure no one got IT twisted.
@timstillwell19114 жыл бұрын
Sweet Thanks gonna try at mine this weekend 🤓
@alexrands25805 жыл бұрын
ok WHAT? The guy just reaches in palms the battery and lifts it out with one hand. I'd have tennis elbow for a year from the ripped tendons. WOW.
@christopherperkins68375 жыл бұрын
It's a tiny battery
@shahinyoutube2074 Жыл бұрын
How many of these are on the transmission? Replaced one and still have the same code might have done the wrong one
@EricGeneric0 Жыл бұрын
do you have a video for P0842 fluid pressure switch?
@KFRoss17 жыл бұрын
Thanks! Worked like a charm!
@ThurmondGoins7 жыл бұрын
+Karl Ross Your welcome
@georgeb49756 ай бұрын
It is the same for civic 2013 also.?
@coryvelarde10277 жыл бұрын
thanks for the help bro! worked great!
@lobos00944 жыл бұрын
Thank you good video I have Honda Odyssey 2008 exl with a D blinking light you think it could be this same pressure sensor that is going bad ? Thank you again
@froyboy05 жыл бұрын
Thank you very much for this video.
@ThurmondGoins5 жыл бұрын
Your welcome
@BassSniper2095 жыл бұрын
Thank you great info
@arodriguez87624 жыл бұрын
Crazy part is I had my 2016 for a year and yesterday after I got an oil change these code appeared but first it was on my dash blinking (#3).
@ImmigrantCatcher6 жыл бұрын
Can confirm 2009 Honda CR-V EX-L AWD worked!
@dmanbastar76176 жыл бұрын
ImmigrantCatcher what was the part number?
@ImmigrantCatcher6 жыл бұрын
dman bastar Honda Part # (28600-RCR-004) 67$, autozone also carries this part for 110$
@jacoblazerus29055 жыл бұрын
I replaced the 2nd pressure switch but to my dismay blinking D and hard shift continued. Any ideas? If i have to rewire how will I go about the process? Thanks for everyone's time.
@patriciahadley5615 жыл бұрын
Make sure you changed out the right one you have 2nd and 3rd it fits both to be safe change out the other and see it it works I see you asked this months ago hopefully you've fix the problem 😬
@Looking_for_a_solutions01 Жыл бұрын
I have the same problem with a Honda civic 2012 please tell me where is located the 2nd pressure switch thank you
@mellscott226855 жыл бұрын
Thanks bro you definitely looked out ✊
@ThurmondGoins5 жыл бұрын
Subscribe and share. Enjoy the other content on this channel
@gontranchartre54925 жыл бұрын
Great video, very useful, thanks a lot. I tried it today, got to the switch easily enough but I had to give up after three grown were absolutely incapable of pinching and pulling on the connector. Do you have any tip for me ? Thanks.
@christopherperkins68375 жыл бұрын
On one side probably the side towards the steering wheel there like a little lever push that down and pull
@ThurmondGoins4 жыл бұрын
What happened, did you ever get it fixed?
@kayd92444 жыл бұрын
Dont serm bad.. I might try it myself 2000 Honda accord
@ThurmondGoins4 жыл бұрын
Good luck? My CR-V is still running, may want to look at some other videos of people working on accords.
@ThurmondGoins4 жыл бұрын
Please subscribe and share.
@kayd92444 жыл бұрын
@@ThurmondGoins I will. Thanks
@arodriguez87624 жыл бұрын
Can you please put a link for this part? It's hard to find because the name is long and I keep getting different things.
@NixieTheTrainer6 жыл бұрын
Could you write down the tools you used please? Name and Size of Each.
@ashergill20687 жыл бұрын
worked great thanks
@ThurmondGoins7 жыл бұрын
+Asher Gill You are welcome
@Hdwrguy7 жыл бұрын
Do you have a part number for this? Honda diagram shows two of them on the vehicle.
@benjaminchioa16687 жыл бұрын
Hdwrguy ii
@sosunny18384 жыл бұрын
Yo where to buy that sensor andhow much does it cost?
@ThurmondGoins4 жыл бұрын
Honda store about $65
@sosunny18384 жыл бұрын
Thanks for help
@rayshawn19866 жыл бұрын
Hi, i replaced my 2nd clutch pressure switch on my 2009 Honda Civic LX. Used a $9 sensor from carparts.com. The car was fine for a couple days, then the transmission started leaking. I thought maybe i didnt tighten it enough, so went back in and tightened the sensor and topped off transmission fluid with idemitsu H-plus ATF. The leaking stopped but transmission issues like hard shifts, delayed acceleration and low fuel economy began. Do i replace the pressure switch with a more expensive one? Replace the fluid with genuine honda atf? Or both?
@ThurmondGoins6 жыл бұрын
my best guess would be a genuine part. I'm a tinker DIY kinda dude, and as a result I have yet to come across many problems to answer such questions. I will share it with a friend and see what he knows.
@ThurmondGoins4 жыл бұрын
I am sorry that is the first I have heard of that issue its been awhile, share with the community how you got it fixed.
@randomvids28823 жыл бұрын
What is the part called on Amazon/Ebay guys?
@ThurmondGoins Жыл бұрын
Its been awhile since I changed made the video but the comments suggested 28600-RPC-004
@moemoes59895 жыл бұрын
great video, thank you
@ThurmondGoins5 жыл бұрын
Your welcome.
@TheSshkolnik7 жыл бұрын
Да ты красавчик. Спасибо!!!
@KM-yl4uy7 жыл бұрын
What year, make, and model vehicle is this?? I have a 2006 Honda ridgeline, and I need to replace the transmission oil pressure switch, but I don't know the location of it?
@ThurmondGoins7 жыл бұрын
+K M on the CR-V It is below the car near the oil pan I just went from the top, I don't have a lift.
@ThurmondGoins7 жыл бұрын
+K M the ridge line is different but if it's the same I think you can go beneath the front and see it, if it's the same it will have blue cap like thing over it, but that's a guess, I have never been close to a ridge line sorry.
@ThurmondGoins7 жыл бұрын
+K M sorry not sure about a RIDGELINE, if it is like the CR-V and the height of your the vehicle is lifted you should be able to see it on the transmission beneath the front, it has a blue cap like cover on it.
@sher12346weng3 жыл бұрын
May i know what part number of this sensor? Thanks
@ThurmondGoins Жыл бұрын
28600-RPC-004
@ianglobaltv2 жыл бұрын
I have an honda accord cl7...I replaced the pressure switch and the d light is still blinking anyone can tell me what's wrong please?
@vkhiev Жыл бұрын
What vehicle is this
@ThurmondGoins Жыл бұрын
2009 crv
@kevinjones26517 жыл бұрын
Thanks! Worked Great!
@jarvisewing25606 жыл бұрын
Hey what would the part number be for a 2007 Honda Accord?
@jarvisewing25606 жыл бұрын
This was a very helpful video.
@ericadurham94746 жыл бұрын
Looking for a part number too!
@badboys2397306 жыл бұрын
28600-RCR-004 (2nd Clutch Oil Pressure Switch) Top Of Transmission (2007 Honda Accord).
@ericadurham94746 жыл бұрын
Thanks! Found on Amazon - $42.
@taterlysaladman93775 жыл бұрын
@@badboys239730 28600-RPC-004
@teddyharesco15986 жыл бұрын
how about on a 2009 Honda Civic ... where is the location of the pressure sensor switch.... I also have the P0843 code and when driving ,the light on D is blinking ..please help,thank you
@vik69696 жыл бұрын
Teddy Haresco I'm dealing with it too. I found 2 sensors, 1 in front and the other in the rear. Cleaned them to see if that would help. It didn't. So I'm planning to order the sensor. And possibly change the fluid.
@teddyharesco15986 жыл бұрын
Hi. maybe I can help.....(For Honda Civic Lx 2009/Check Engine Light ON and blinking "D"light) Is your Error Code from OBDII P0843 which says Transmission Fluid Pressure Sensor/Switch A....if it is ..then here is the parts number 28600-RPC-004 and it is located near the driver (rear) that is the Switch A and the one in the front close to the grill/bumper is Switch B and it will be a different Error code.....I did change my fluid also and make sure it is on the right amount....I did it today and it fixed the problem..... the only strugle is taking out and putting back the filter box.... just have patience and you will get it, .... enjoy
@user-pc5tf8uh4l6 жыл бұрын
Teddy Haresco hiii hey..this might be a dum questiion but the 2nd pressure sensor and the 3rd are two different sensors right???
@teddyharesco15986 жыл бұрын
yes.... on my civic the OBDII code will state if it is switch A or switch B.... A is at the back of the transmission which is close to the firewall driverside and switch B is in the frontclose to the front grill... I hope this help you....
@vik69696 жыл бұрын
I replaced the sensor that is in the rear of the transmission and it cleared it all up. I went to the junk yard and found a same generation civic and took the sensor from the front of the trans and used it to replace the rear sensor. Works fine now. But plan on buying a new sensor.
@adolfoescalante62205 жыл бұрын
Let the birds chirping instead of the music much better
@taterlysaladman93775 жыл бұрын
This is for CRV it is NOTHING Like CIVIC, which is in an entirely different location on the rear of the transmission, and removing the airbox in the 2007-2011 civic is very difficult, requires twisting and cursing.
@ThurmondGoins5 жыл бұрын
I know its super easy if you have a community lift you could get it done in minutes.
@ThrowyaXup5 жыл бұрын
Anyone have the exact part number for this?
@ThurmondGoins5 жыл бұрын
28600 -RCL-004
@ThrowyaXup5 жыл бұрын
@@ThurmondGoins the one on the driver's side right?
@Dons1667 жыл бұрын
Looks like Honda CRV
@Bolomofo1007 жыл бұрын
what car is this
@ThurmondGoins7 жыл бұрын
Honda CR-V 2009 LX
@earauz664 жыл бұрын
What’s the part number??
@ThurmondGoins Жыл бұрын
28600-RPC-004
@ThurmondGoins7 жыл бұрын
2009 Honda CR-V LX
@Edenssunlight7 жыл бұрын
part number?
@ThurmondGoins7 жыл бұрын
Sgt. Shill I am going to call the store and find out.
@marcelolenarduzzi40665 жыл бұрын
@@ThurmondGoins Could you please inform the part number for 2nd switch(upper in AT) for CRV 2008 2WD AT 2.4? The P/N is 28600-RCR-004 or 28600-RCL-004?
@ThurmondGoins5 жыл бұрын
The P/N is 28600-RCR-004 or 28600-RCL-004?
@ThurmondGoins5 жыл бұрын
Thanks marcelo, this Video really caught me off guard, thank you very much for your help.
@survey-engineering5 жыл бұрын
PLEASE i want serial number of sensor
@taterlysaladman93775 жыл бұрын
28600-RPC-004 for a 2009 Civic. And that now is replacement for both second and third clutch sensor. Per Honda.
@citariz14 жыл бұрын
hola que modelo es?
@ThurmondGoins Жыл бұрын
28600-RPC-004
@dimitrijms77 жыл бұрын
What's the part number
@ThurmondGoins7 жыл бұрын
+Dominic d Nash part number courtesy of Hennesy Honda in Woodstock, Ga: 28600 -RCL-004
@ThurmondGoins7 жыл бұрын
+Dominic d Nash the part number courtesy of Hennesy Honda of Woodstock: 28600 -RCL-004
@stephentrinh6406 жыл бұрын
"28600-RPC-004" for my 2009 Civic
@marcelolenarduzzi40665 жыл бұрын
@@ThurmondGoins Could you please inform the part number for 2nd switch(upper in AT) for CRV 2008 2WD AT 2.4? The P/N is 28600-RCR-004 or 28600-RCL-004?
@ltmaddog7736 жыл бұрын
The pressure switch for 2nd and 3rd are the same, imagine 1st is same.