Thank you!! This is my first auto repair I accomplished all by myself. Your video is great! I love that I was able to do it without a repair shop!!

Thank you! This cleared the code and stopped the flashing "D" as well. I used the BlueDriver OBD2 tool to pull the codes (worth the $99) which also had two Evap System codes the came up and the BlueDriver also shows most common fixes for each issue. For the Evap codes changing the gas cap was top of the list. I swapped in a new OEM Honda gas cap and those codes cleared as well. Check engine light has been off now for almost a week so I'm confident these changes fixed the issues. *** Other note, recommend noting the exact tool size used in each portion of the job. Besides the noted 22mm deep socket driver used for the pressure switch, it was a 10mm driver for the air cleaner base removal.

Great tutorial! Same code came up for me on my 2009 Honda CR-V. I bought the part, followed your steps, cleared the engine light, and it hasn’t come back. Make sure you have a 22mm deep socket. Most deep socket sets only go up to 19mm so don’t be surprised if you don’t have one in your toolbox. Great work putting this together! Big help!

Just replaced this switch in my wife's 2009 CRV today thanks to your video. I was suprised to find no washer on the old one. Napa didn't carry it, and I didn't want to drive to the Honda dealer an hour away, so I found a standard 10mm flat washer at Ace Hardware that was identical and worked perfectly. Thanks again for your excellent video.

Fantastic - I was able to fix my 2009 CRV with this (and another video). So far so good. Couple of things to note from my project - The air filter housing base was a pain to slide out of the rubber holder on the far left corner. Seems like the trick is to pull it firmly straight up through it (and push it straight down through it during reinstall). I removed the battery too for better access. My crush washer (10mm) was stuck to the transmission housing and needed a couple of knocks from a flat head screwdriver to knock it loose. But other than that, it seemed to have worked so far. I drained the transmission fluid and replaced it with new fluid while I was at this. Drove around at different speeds and still no check engine light. Fingers crossed. Thank you for the video, very helpful.

One more note you will need a 22mm deep socket. Luckily I had a 7/8 deep socket still worked perfect no wiggle no stripping. Again great video thanks.

Thank you so much for the video....It was very helpful....God bless you!!!

Honda tech here, allso recommend people to look at the cables going to the sensors. They are placed very close to where mice would chill, so they chew up everything 😅

Extremely easy fix. Thanks for the information. Can't even imagine how much I saved by spending a relaxed 15 minutes on that replacement

Thanks for sharing. I did it yesterday in my car. Just a little complicated but finally done. No more D blinking.

Thank you for the video, wife’s 2009 CR-V just popped this code. Watching the video I noticed that the brake fluid appear very very dark, and with the car being over 100,000 miles a full pour drain of the brake fluid would be a good idea to preserver the inside of the brake lines. Thanks again for the video

Thanks for this video. I'm having to do this job now. It turns out that my sensor is fine, a mouse just ate the wire. Your video showed me exactly where to look for the problem.

Great video great teaching sir GOD BLESS you and keep up thanks very much 😊

Thank you very much from Algeria :-)

Great video, thanks for taking the time!

I saw that you did ATF drain and fill at the end of the video. Do you know if your car has a "maintenance minder" system, where it shows A1 or B2 services? If it does, do you know at what interval(miles/time) does the code for ATF change come up?

What are this four Honda staring o f whatt ? Got my Honda crv 2000 ex 5 speed sometime staring sometime not don't can be the swith for the clutch thank you video

Great video thanks for uploading,can I purchase a new washer for the transmission drain plug at a Honda dealership?

Great video thanks

exelente video,grasias por compartirlo.........

Thank u for this video.. I'm confident I can do the repair myself.. however, what year crv was this in ur video? I have a 2012, and it seems hard to find a part for that yr. Also the what if the flashing D stops after a stop and restarting car, is it still the 2nd clutch? $75 for DX at shop but if the part I found that is same price than I'd be paying at least $100 more.. only have today to work on it b4 work and holiday

Nice.. Thank you

Hello. Is there a fluid or any particular lubricant that is safe for wires or switch? My 2nd transmission fluid pressure switch is hard to detach from the connector.

Great Video ! i have same issue 2nd shifting late in HONDA CRV 2007. I checked on computer test NO ERROR CODE appaired ! what Do you suggest on this kind of transition problem ?

should the sensor “placed on a bench” read normally open or closed? this so i can test its wiring before i disassemble it. very good video , veryuseful

Thanks. Nice quick job and no more flashing D. Will the engine light go out on its own?

I scan mine Honda CRV 2008. It said it the third pressure clutch switch. I change it an the d still blinking. What could be the cause? Also it keeps on jumping out of gear.

How long can you drive with the switch being bad? Will it mess up the transmission? And if it’s switched B for the third clutch … is it the same territory of the Engine?

Great job . So complicated just like open heart surgery 😉😉😄😄

Would this fix the blinking D light without a check engine code? It’s intermittent and doesn’t come up all the time. The d light stops blinking after I turn the car off and turn it back on?

where can I find the wire harness that connects to that switch I had a rat chew through mine.

I replaces the 3rd clear the code and came back on any suggestions

Hey good vid. Where can I Buy this online? I live in a country that doesn't have reliable honda retailers.

I got same P0843 code on my honda civic 2011 coupe, you think it will be same part # for mine

Good blessed you

Thank you

How about model crv 2011? Same location?

Hi.Is that Honda 2.0 Petrol Automatic? What is the sensor part number to order it ?

Any body knows 2nd clutch pressure switch location for crv 2016?

What are the dangers associated with driving without replacing switch once the light is flashing?

Howcome my OBDII is not detecting the error code my D shift is flashing as well not sure if it's 3rd clutch or second clutch switch I need to replace. Help tnx

Thanks a lot!

any specific torque for tightening that?

What year is your CRV? My niece's is a 2011 and she just told me she has the dreaded flashing D....

Hi, I have the same code but I don't know the part number for honda pilot 2016!

Someone get this man some water lol Great vid tho

Hi I have the same issue can it be the sensor being bad or transmission going bad

What the symptom? Is it not shifting gear?

I changed out the switch with a new one, and I still get a blinking D. I don't have the check engine light on, but I still have the blinking D. Any ideas. The code is PO848.

Please 🙏 what happens when the sensor is faulty?

How much does this usually cost?

I have a 2017 where is the switch located at? Also the Honda dealership tells us that the transmission is bad with a bad torque converter it's not even doing anything wrong all we have is a blinking d I unhook the negative battery terminal it went away for awhile now it's back does anybody know if they'll give me a printer for the diagnostic they wouldn't why would they why would they lie

Is that the same for honda crv 2015

I did but still flashing,why? Any answers?

My 2015crv takes about 10 to 15 minutes before starting to move slowly when shift to drive

What year was the CRV?

I saved $100 becuse these vedeo

If you are able to put the car on a car lift - it’s easier to do from under the car

Should give the Honda part number in the description

Great video but putting metal tools and parts on top of battery and or near battery post wether battery connected or not is not a good idea. Be careful you don’t want to ride the lightning!!!

please 3nd

Bastard mechanics wana charge $7000 to install a new transmission

Thank you