ES32 PIR Sensor Stair Light Controller Connection and Setup

No video

ES32 PIR Sensor Stair Light Controller Connection and Setup

Рет қаралды 30,559

COXO

Күн бұрын

Пікірлер: 17

@ihrdlick Жыл бұрын

Very usefull 😊

@coxotech Жыл бұрын

Thank you and hope this video helps you.

@dimitrislykidis8405 11 ай бұрын

Hi! the first led tape how is the name of that ? This ledtape goes straight like star not the others . how will I find them, what are the names of this type of led thanks.

@pawel_g86 10 ай бұрын

Hello, Are you able to help me with the ES32 stair controller setup? I have connected all steps to the controller + light and 2 PIR sensors. Steps are turning ON and OFF one-by-one as expected. The problem I have is when I go up, the sensor at the bottom initiates the sequence...but when I'm at the top, the upper PIR sensor initiates the sequence from top to down. Is it possible to set any delay or something? Because currently it looks like a mess, stairs from the top are turning OFF, but at the same time, they are turned ON from the top... I tried many combinations and nothing helped, but that's my first time with this controller

@ihrdlick Жыл бұрын

What is for DOT number (on video 311) for when I use steps + strip ? thank you

@coxotech Жыл бұрын

Hello, this DOT:311 means pixel.

@ultimateone624 Жыл бұрын

On the website I'm trying to find this exact same kit how to I purchase

@coxotech Жыл бұрын

coxotech.com/product/es32-stair-light-controller/ Hello, you can enter our website through this link to send an inquiry form, and we will have a salesperson reply to you. Thank you.

@tinlarin1000 Жыл бұрын

Buenas tardes, que fuente de poder me recomienda de su tienda para este producto?

@coxotech Жыл бұрын

Hello, this power supply is COXO's 12V/24V constant voltage power supply, you can enter our website（coxotech.com/accessories/） to browse product information related to power supply or controller.

@hqs9585 Жыл бұрын

W = VI, so for say strip of 2W per foot , will give you the total wattage depending on the number add them together and multiply by 1.2, that is a good beginning. White only light will take about 50Watts for 8 steps (approximation), the current min should be about 5 Amps. Hope this helps some. If more than 10 steps I would recommend two power supplies and NOT a single BIG power supply (safety and regulations. 150 Watts and 24 VDC (or 12 VDC) may generate too much current and not be within specifications for residential homes.