Essential Hinge Jig ~ Hang Doors Quickly & Easily Every Time

Рет қаралды 81,799

Жыл бұрын

Dan's Essential Hinge Jig is available from Benchdogs.
🔗 benchdogs.co.uk
Dan Cox has designed a hinge jig that answers the shortcomings of existing hinge jigs.
• Clamps to the door and is non-marking.
• Open aperture to eliminate the need to plunge.
• Fully configurable for 3 or 4-inch hinges and taller doors.
• Ideal for fire doors with the 100mm spacer block.
• All parts are replaceable through the UK manufacturer.
• Portable in its own carry tube.
Dan has also created the Ultimate Roofing Square.
🔗 www.essential-carpenter-tools...
The Essential Hinge Jig. Hang Doors Quickly & Easily Every Time.
The set includes 3 extrusion rails and joiners, 6 hinge blocks (depending on size, 3 or 4 inches), 6 flush guides, 3 inline clamps, a 2mm head joint plate, and a carry case.
=================================
#carpentry #dancox #woodworking
🔗 Skill Builder Link Tree: linktr.ee/skillbuilder
👍 Tell us what you like: skill-builder.uk/vote
📪 Ask Skill Builder: skill-builder.uk/send
🎥 TikTok: / skillbuilder
📖 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: kzfaq.info...
💧 We Support Charity Water: www.charitywater.org
◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow expected standards of politeness and decency.

Пікірлер: 258

@bradwhelan4466 Жыл бұрын

There is not a better tool than one designed by the person who actually knows what he wants from it. And this looks like an excellent piece of kit.

@denty32 Жыл бұрын

Beautifully made piece of kit, well thought out and made in the uk. I think like you say once it’s set up(10 minutes) and bang it’s off 👏👏

@edthompson9337 Жыл бұрын

A lot of thought as gone in to that design, especially like the built in clamps for attaching to the door and that you are making it in the UK.❤

@robertgreen2765 Жыл бұрын

Just ordered mine i have been waiting for something like this to come on the market and british made what a great peace of kit.

@Ultimate-roofing-square. Жыл бұрын

Thanks Robert.

@Ianf1x Жыл бұрын

Thats a really good price. I like that you told us about small problems like start at bottom of gig to avoid dust . Great tips.

@benalexlily Жыл бұрын

All ways start from the bottom 😂

@RpR_Makes Жыл бұрын

Good luck to you Dan, you deserve it for all the hard work, dedication and passion you show for your craft. I will buy one

@Ultimate-roofing-square. Жыл бұрын

Thank you.

@user-lj2nc5qj9h Жыл бұрын

Well done Dan great jig👍 it’s good to see something that’s better than the competition and at a competitive price too

@Ultimate-roofing-square. Жыл бұрын

Many thanks.

@thetallcarpenter Жыл бұрын

This new jig looks really cool Dan, and I can think of many reasons to buy one🤔particularly the way it self clamps, its super easy hinge apeture setting and, of course, being made in Great Britain👍Well done to all involved in its design and manufacture👌

@Ultimate-roofing-square. Жыл бұрын

Thanks Del. Not all me, Ralph certainly improved my ideas and made it look great. Jules got involved too.

@raybrock6083 4 ай бұрын

I have now received my jig which arrived very quickly. I have now used my jig on six doors and the results are superb, as accurate as a CNC machine but I did have one niggle. The knurled knob that tightens the blocks to the rail. A couple were stiff to turn which resulted in them moving slightly when I stood the jig up after use. I had to be very careful not to knock it in anyway. As I mentioned in my previous post I did drill through the extrusion to secure the jig to the door lining and it was covered by the door stops so it would be nice if the holes were already there but it was a simple job to drill them myself.

@rickygreenslade7399 Жыл бұрын

Fantastic piece of kit.. looks well thought out and id say thats well worth the money...

@markhoulding1938 Жыл бұрын

Well thought out Dan Top of the class for that looks awesome pal.👍

@mikeswoodencreations5712 Жыл бұрын

Looks good Dan, I like how you’ve included slight adjustment on the depth of the hinge as this is set on other jigs, nice job!

@MJBott Жыл бұрын

Very tidy Dan. Good luck with it 👍

@LeeTillbury Жыл бұрын

Brilliant Dan. Looks really good 👍🏻

@burwoodbuild 10 ай бұрын

Dan…. I have to say you’ve absolutely smashed it mate! This jig is genius with some really smart ideas that my Trend jig doesn’t have. And getting Benchdogs involved was a master stroke!👌🏼🥹

@cglees Жыл бұрын

Looks brilliant, I want one!! Pays for itself on the first job easily

@MrSeymour1308 Жыл бұрын

Given the flexibility of the design, and the quality of bench dogs kit, £220 is a steal.

@vincentshield2467 9 ай бұрын

Bought this jig after buying dans essential roofing square , both fantastic bits of kit , extremely well made , you get what you pay for , only got one very small critique, do the grub screws up tight , they drop out if you don’t , but you get spare grub screws when you buy the jig , they have also added a 3 mm spacer for the head that comes with the jig , well done dan 👍

@multiworx Жыл бұрын

Maybe put a few holes in the main rails so the screws are hidden in behind the doorstops. Great content as always guys.

@samting2009 Жыл бұрын

that's what I was going to surgest.

@SkillBuilder Жыл бұрын

We did discuss that as an option.

@benalexlily Жыл бұрын

I have the trend jig and I screw it to the door and lining and yes if there are screw holes in the main body that would be so much better behind the door stop as if I was and am thinking about getting one I would do this and way 4.5 mill hole a with a 4 x 50mm screw

@karlmoore1292 Жыл бұрын

Beautiful bit of kit 😃

@j444nsy4 Жыл бұрын

Great jig Dan well done mate I wish you all the best with sales. Can’t wait to see the next idea👍🏻

@Ultimate-roofing-square. Жыл бұрын

Thanks 🙌 Few smaller ideas in my head. 🤪

@aarbee_ Жыл бұрын

looks like a good bit of kit especially for the mk1 version 😉 i think rodge is right with the grub screws though i know id loose them on day 1 🤣🤣 a toolless way of adjusting and connecting together would be great!

@TheToolJunkies 11 ай бұрын

Awesome video boys! I’ll be using mine this week and I can’t wait!

@brianhill1294 Жыл бұрын

Looks a lovely bit of kit, wish you all the best with your new jig.👍👍

@Ultimate-roofing-square. Жыл бұрын

Thank you.

@Bari_Khan_CEng_CMarEng Жыл бұрын

Great video and lovely production value to the video, I like the background music!

@user-jr6xc8tp1w Жыл бұрын

I’m an apprentice carpenter I’ve invested in the roofing square and it’s absolutely amazing makes life a hell of a lot easier will be investing in the hinge jig for sure wouldn’t of seen it without skill builder Channel cheers guys

@SkillBuilder Жыл бұрын

Good to know, the square is great and the hinge jig seems to be popular too. We need to get Dan thinking about other labour saving devices.

@Ultimate-roofing-square. Жыл бұрын

Thanks 🙏🏼. I’ll be thinking about other ideas now the hinge jig is out.

@hondacrx7829 11 ай бұрын

I just finished building the handrail on my deck kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!

@daveinOZ Жыл бұрын

Great work Dan! I purchased your ultimate roofing square last year, I love the quality of the product and so ive orded your hinge jig as well, cant wait to give it a go right here in Melbourne Australia.. thanks again.👍

@Ultimate-roofing-square. Жыл бұрын

Many thanks. 🙌

@daveinOZ Жыл бұрын

@@Ultimate-roofing-square. Dan many thanks received my jig in the mail today (Melbourne, Australia)

@Ultimate-roofing-square. Жыл бұрын

@@daveinOZ that’s great, thanks for buying one. 🙌🏻 Feel free to send us some photos of the hinge jig in action. Dan.

@peterbeyer5755 9 ай бұрын

Interesting listening to two masters conversation about this jig.

@didgejan 2 ай бұрын

Brilliant bit of kit mate. 👍

@Bite_Me Жыл бұрын

I've been looking at hinge jigs for years, never really been happy enough with them, always something funny that you have to do to make them work. But this one is the first one that could actually get my money. Seems very flexible in the size of door, hinge position etc. Looks to be a very sturdy bit of kit, have been put off by some that look like you have to be very precious with and the other extreme where they end up being think and heavy. Best of all British made, something to be very proud of in its self let alone designing it. I much prefer the open style, I too have had kitchen jigs damaged, admittedly I did foolishly lend in to someone. I like the idea of the screw holes in the main frame an eailer commenter made. Great product sir, you deserve to be very successful with it. Just been looking on the website, will it be possible to buy the hinge blocks separately, i.e. I by the 3inch system and can later add the 4inch blocks

@jimmurphy4083 Жыл бұрын

Great job, well done.

@rockabillyrebeljim Жыл бұрын

Looks so easy, great price too. Dan always inspires me to keep at it 👍

@Ultimate-roofing-square. 11 ай бұрын

Thanks RBJ

@liamstokes3964 Жыл бұрын

Looks good lads. Always used a trend skeleton jig myself, but pros and cons to both I’d say

@quelchie91 Жыл бұрын

Looks well made. I like the fact you can use it on smaller doors and nip the blocks up tight. I use the trend skeleton jig as its quick to set up. I find the blocks move sometimes if you push guide bush into it too hard, as they are only tightend finger tight. Not a fan of screwing the jig to frame though, no reason why you couldn't use bradawls still I guess. I think the way of adjusting the jig to the thickness of door is far better on the trends. There's pros and cons to all of them.

@self-preservationsociety7057 3 ай бұрын

Nice one lads , I’m glad I ‘ hung ‘ around to watch the video

@DP-tb5qn Жыл бұрын

Dan is alien, amazing. Well done mate

@Ultimate-roofing-square. Жыл бұрын

Thanks. 🙌🏻

@OOOOOOOOSSHH Жыл бұрын

Great collaboration Dan I will definitely be investing in one.

@Ultimate-roofing-square. Жыл бұрын

Thanks.

@lee2003uk Жыл бұрын

Nice bit of kit👍👍

@SkillBuilder Жыл бұрын

Thanks 👍

@margaretkelly1910 Ай бұрын

A irish carpenter the roofing square very good idea and well made but with the hinge jig we use rebated door frames but well designed your are a good one

@statesidechippie 9 ай бұрын

This looks spot on. I’ve been using the Porter cable jig to set 8’ doors, it’s a headache to setup, you need to run bradawl pins in to the door and you have zero flexibility in the hinge locations. This looks like it checks all those boxes. Hoping you’ll ship the the US. Thanks Dan and Roger.

@lazylad8544 Жыл бұрын

You will sell a good few of these as it looks well built. If you buy cheap you buy twice. The price is reasonable. After you've fitted the first twenty doors you'll be glad you paid the extra. Now we're is my apprentice to lug these heavy doors upstairs 😉🤣🤣👍👍.

@RI-uv3lm Жыл бұрын

Looks like it is a battle of the hinge jigs between Dan & Robin! Cant help noticing the sequence & timing of your videos! Who came in first? 😀 👏👏

@SkillBuilder Жыл бұрын

We said on Instagram that this video was going out at 7pm so Robin went for 6.15. God loves a trier as our Irish friends are apt to say.

@smartbuildengineering Жыл бұрын

Looks great - for using with a bearing guided bit I wonder if you could swap the block positions so you're referencing against the ends without the nib? I guess you would still need to compensate for the 2mm offset on hinge width. hinge.

@SteveAndAlexBuild Жыл бұрын

Dan the man ! Another clever invention . I’d buy one if I was a carpenter mate 🤜🏻🤛🏻🧱

@Ultimate-roofing-square. Жыл бұрын

Thanks chaps. 🙏. 👊🏻

@SkillBuilder Жыл бұрын

You wait until you see his next invention, it lays bricks while you stay at home watching day time t.v

@Ultimate-roofing-square. Жыл бұрын

@@SkillBuilder🤫

@1PIL Жыл бұрын

Bricklayers, the only trade to p**s up against their work on site 🙄😁

@jarvis7281 Жыл бұрын

Hinge jig wars……Robin left Skillbuilder when Dan came on the scene, go figure!!!

@benalexlily Жыл бұрын

One big question see with the clamp witch I do like but what happens when you ave to cut the hinge out on the other side of the door do that have to be taken off and then put back on to then clamp back on to the door

@boogie11188 8 ай бұрын

Looks like a good bit of kit, and my experience with benchdogs is they do great quality products. however, I have used many different hinge jigs over the years, and have found it hard to beat my one piece trend hinge jig, but I only tend to hang standard size doors. advantage of this jig is you can add more sections if you have larger doors to hang, just one problem, looking at the size of section that fits on door lining, doesn't look like it would fit a rebated door frame, the trend works well on rebated frames or if door stops on

@moggs20 Жыл бұрын

Nice looking bit of kit, I suppose after the first set up you would get the hang of it quick enough

@hi-tech55 Жыл бұрын

I have to throw away my ply jigs that work very well when hanging multiple doors. A bit of superglue and a bearing cutting works a treat. I am a bit of a dinosaur but appreciate the engineering and thought that has gone into this jig.

@rickyjackson4633 Жыл бұрын

All looks good but will those blocks move over time when your packing and unpacking

@robyndavis3043 Жыл бұрын

Very interesting

@Harry-nc7zi 6 ай бұрын

Just got a price job on site, this will be ideal 👌

@johnastbury4116 8 ай бұрын

I really like the look of this and I think I'll be investing in the kit very soon. just a quick question how thick was the liner that you demonstrated the jig on ?

@markhannan5167 Жыл бұрын

Looks a goods bit of kit that will last the test of time

@raybrock6083 5 ай бұрын

Just ordered mine. I will be looking to see if I can drill through the extrusion to secure it to the door frame so that the screw holes end up behind the door stops when they are fitted.

@craigthornhill2373 8 ай бұрын

How does it work in door casings with rebate already there instead of lining.. .?.. looks good quality been using a trend one for years and like the idea of no holes in the door so this could be the one .. hopefully this can be done 👍👍

@arpadvarga3475 Жыл бұрын

That's so cool. I should watch this 10 replaced door earlier 😂

@ackec-umsekkruch-ekucki952 Жыл бұрын

Guide bush all the way. You get much more stability and control and like they say, with guided bits it's really easy to hit the template.

@Ultimate-roofing-square. Жыл бұрын

Oh yes. More blade protection.. thanks for watching.

@jimrowland8310 Жыл бұрын

I’d 100% buy that over any MDF ones 👍👌👏👊🔥

@Benchdogtools Жыл бұрын

Great video guys. Well done and explained well. Btw we are in Somerset 😂

@Ultimate-roofing-square. Жыл бұрын

Opps… how many times have I visited you.. 😂

@mikeswoodencreations5712 Жыл бұрын

😂😂😂

@stephenroberts9333 Жыл бұрын

Chisel, mallet, pure skill.

@gingerelvis Жыл бұрын

I've got to ask, where are you getting solid pine doors from? I had a look recently and even the ones from XL were engineered with veneer. I ended up doing a lot of work to some reclaimed doors (made them bigger and square with some ripped down timber from of s similar age and dowels) because I couldn't find anything that came close in quality to the old Victorian stuff. The jig is very clever and well made as you would expect from Benchdogs, I'm only a DIY renovator pleb so I'll stick to the chisels for now 😂doesn't take me too long to hand a couple of doors.

@stephenmccoy898 Жыл бұрын

And dan forgot to wish you good luck with it, 😜👍

@trevdale7967 2 күн бұрын

Help me out here. How does it attach to a rebated door jamb? Brilliantly put together

@imranbashiruk Жыл бұрын

How about a comparison between this and the new Trend hinge jig

@sundayfooty Жыл бұрын

Please make a jig for latch and locks aswell

@burwoodbuild 10 ай бұрын

Dan - when you finally got the finished product in your hands did you dance a little jig?! 🕺 😂

@benvernalls6276 Жыл бұрын

I like this I currently have the trend and although its a good jig this seems better and more universal. I like Robins jig but it's not practical for a carpenter.

@UniversalExports Жыл бұрын

If i was a joiner I would buy one 👍😂.

@SkillBuilder Жыл бұрын

If I were a carpenter and you were a lady Would you marry me anyway and have my hinge jig?

@anthonychristopherali407 Жыл бұрын

Nice jig. Will it still be able to butt up against the internal head of a frame if the stops are already on/ if the frame was rebated? I always rebate front door frames when I make them and I make a similar mdf template with packers in rebate and small packer at the top. I have to notch the top of template to allow it to sit up against the rebate in the head though

@Ultimate-roofing-square. Жыл бұрын

You can just slide the block above the black metal track to form the notch.

@anthonychristopherali407 Жыл бұрын

Ah yeah, set the top block 15mm (rebate depth) higher from the get-go. Nice one mate, will order one deffo

@Ultimate-roofing-square. Жыл бұрын

@@anthonychristopherali407 Thanks. The pack out blocks will be available soon..

@j444nsy4 Жыл бұрын

Hinge gig wars

@troyboy4345 Жыл бұрын

Clip or magnet to hold the Allen key ?

@CharlieGroh 3 ай бұрын

A Vix (or self centering) Bit would make your gig better. This jig looks good for new construction...

@Hayseboy Жыл бұрын

Very nice kit and to be fair thats not a bad price one full house of doors would pay for it. Keep up the outstanding work skill builder and Dan

@SkillBuilder Жыл бұрын

Thanks for your support and kind words. Price is a funny thing. Some people would rather buy cheap and keep replacing an item while others like to own nice things. The open aperture and guide bush means it is far less likely to be damaged by the cutter so it should last for years.

@VinceSamios Жыл бұрын

I've used and made a few jigs - I feel like this is great for repeat work, but not super flexible.

@Ultimate-roofing-square. Жыл бұрын

I think it’s very flexible, can do doors with 3 or 4 inch hinges. Height wise it will do from approximately 600 to what ever height you want. I’d guess 3 meters would be rather tall. It clamps to a finished door and will be able to do rebated frames.

@stephenmccoy898 Жыл бұрын

The only thing i would say that having to adjust the clamps or flush plates to use on the frame would irk me, but its a great piece of kit all the same, and im a fan of dans,, i have his roofing square which is brilliant

@SkillBuilder Жыл бұрын

Hi Stephen Moving that jig from door to frame is nowhere near as hard as you might imagine.

@stephenmccoy898 Жыл бұрын

@@SkillBuilder not hard no not at all,,

@aninterviewwith...1702 Жыл бұрын

I'm terrible at doors but you've given me some ideas. Ta.

@manxvibes32 4 ай бұрын

Great piece of kit, I do same thing with the drill bit too, those centre bits are a pain....will look forward to seeing the demo on the rebated frames

@plumpii7177 Жыл бұрын

Looks a quality jig.. 😎 hope it sell like bacon butties outside a well known builders merchant..

@Ultimate-roofing-square. Жыл бұрын

😂. Thanks.

@SingleTrack66 Жыл бұрын

It’s a winner Dan . If you can do it for £220 then I’m getting one. Anyone want to buy my Trend ?

@georgelfc1 Жыл бұрын

Looks great guys but I have to ask why didn't you do away with the knib and just use a bearing bit making an exact mortice and their would have been no need for guide bush either !!! Would be great to see what others think

@SkillBuilder Жыл бұрын

George That was explained in the bit where we talked about the bearing bit.

@georgelfc1 Жыл бұрын

Thanks 👍🏼

@ujd2930 Жыл бұрын

this jig looks good ! i use the trend jig and it drives me mad . i have to put an additional screws through the jig to the frame because the jig doesn't sit flat enough to the frame even with the little awls . also, you were asked about how it attached to the frame . couldn't you screw it through the little silver sliding adjustments to the frame ( 15.05 mins ) ? that way the trim would cover any holes ....just a thought ! anyway product looks good , well designed !!

@Ultimate-roofing-square. Жыл бұрын

Thanks for your comments, and yes that could be a option to fix it to a finished frame.

@SkillBuilder Жыл бұрын

eugene That is a great idea

@mrdavrosjipo Жыл бұрын

its missing a lock jig and you could have a second straight edge with spacers on the opposite side of the blue blocks to make your euro grove. these are the type of jigs i need to make and know that i and the company's i work for would be happy to buy

@stevekearney1993 Жыл бұрын

Just a thought Dan, when you screwed to the jamb, would you be able to screw through the black section so that the screw hole is later covered by the door stop strip? Looks bloody impressive mate 👌 considering having one shipped to Australia 🇦🇺

@Ultimate-roofing-square. Жыл бұрын

Hi Steve, yes we have considered that and it’s a good idea. The slight draw back is that the hole would be in the channel so a washer would be needed. Thanks for the comment and watching.

@stevekearney1993 Жыл бұрын

@@Ultimate-roofing-square. thanks for the reply. Love your work!

@Ultimate-roofing-square. Жыл бұрын

@@stevekearney1993 🙏🏼🙌

@lestercranmer2631 Жыл бұрын

very nice! would be a good idea to add dimensions of grub screws in the instructions or on the jig, also are the measurements screen printed or laser marked? looks printed to me, so will wear off with router base.

@SkillBuilder Жыл бұрын

lasers all day long kzfaq.info/get/bejne/fNmVobOHndq5d5s.html

@lestercranmer2631 Жыл бұрын

@@SkillBuilder thanks I missed this one, youtube notifications are a bit hit & miss

@SkillBuilder Жыл бұрын

@@lestercranmer2631 Yes that is a real shame because we put so much stuff out that isn't picked up by our regular audience.

@Benchdogtools Жыл бұрын

Definitely laser markings.

@briantrueman3505 Жыл бұрын

Good luck with the tool Dan it looks like a really well made piece of kit 🔧🔧👍👍

@vinnyrea5608 Жыл бұрын

Like the jig alot. but as roger mentioned about the grub screws, cant you change them to T20 0R T 25 screws. I feel these would be much better and a lot more harder wearing than allen key screws. As you know they never last. a few times of nipping up and loosening they are gonna round off inside. Torx threads are far more harder wearing because theres mor points of contact. Other than that, lovely bit of kit dan👍

@nZebco Жыл бұрын

This is a good looking tool. Ive got the Trend skeleton jig, the big one and I havent use it for the past 3 years because most doors have the hinges atached already. I used to fit 400-500 fire doors a month few years back, not anymore. Good video. Thanks for the free entertainment:)

@kieranfinnerty631 Жыл бұрын

That’s 20 to 25 doors a day on a 5 day week 🤔

@nZebco Жыл бұрын

@@kieranfinnerty631 Correct! But I was a team of two. Didn't said alone🤪. We used to prepare and had labourers to move the doors to each floor/room, then me and my coleague did the install. Also we did mostly 6 days a week when I was money hungry😉

@SkillBuilder Жыл бұрын

@@nZebco I know a carpenter Andy Foster who used to fit fire doors in London all day, every day. The doors were propped up in the hallways in hotels and flats and he would start at one end and wheel his rig down the corridor with the router and jig ready to go in the bottom. If you organise it properly two of you can do those kind of number but, like you said, it is all about the money. It would do your head in soon enough.

@nZebco Жыл бұрын

@@SkillBuilder I did the exact same thing🤪. two carpenter and two labouresrs, we never carried a door, they never fitted one, very precise work.

@nZebco Жыл бұрын

@@SkillBuilder I have photos of doors proped and alligned like domino pieces in massive open spaces like future shopping centers. Literally walking in with a hammer, pencil,corner chisel, makita portable router and trend skeleton jig. One person was routing, one was finishing, the guys behind carry the doors in the designated rooms.WEhen all prep done, plumb one side of the all the door openings, fit the doors, trims etc.. literally the success of this is the fact that you move with only tool belt around you and obviously no dead times. Been only money driven to do that as I had no pleasure in doing repetitive jobs. No more:)

@Martin37vg Жыл бұрын

Hell of a bit of kit !!! But not better than the plywood ones we used to make in about 15 mins 45 years when ago fitting doors in the frames when building ships. 'Plus because the plywood was wider router was more stable . Plus when I do three hinges ( which personally I do not like ) l tend not to chop it in on the frame until I have had the door on in case I need to adjust depth position etc as If all three hinge pins are not in perfect alignment you will have issues.

@jamesdoughty8211 Жыл бұрын

Why can’t you screw the jig to the frame by the sliding rail and not the blocks, wouldn’t that place the crew holes where the door stops go and therefore negate any damage to the frame?

@Ultimate-roofing-square. Жыл бұрын

Hi James, It could be screwed through the extrusion however there is channels in it so the hole would be in the channel. Thanks for watching.

@FPL-LARD Жыл бұрын

I don't hang doors anymore I pass them on as I've had my days lugging doors about, but if I was hanging doors on a daily basis this tool would be in my kit. Quality written all over it, and once you have fiddled about and got used to setting that up it would be a breeze.

@mphalo1804 8 ай бұрын

What do you do now? Thats less labour intensive.

@Crushwokery Жыл бұрын

If only you brought this out 2 years ago I'd have jumped at it in a heartbeat. I had to settle for the trend skelly jig which in my opinion at the time was the best available. As I look after my gear I doubt I'll need to buy another unless sticky fingers decide to liberate it. Just wanted to blow smoke up your a**e as you done a great job with it. Good luck with it 😉👍🍻

@Ultimate-roofing-square. Жыл бұрын

Many thanks.

@harryhalloran5079 Жыл бұрын

Hi Rodger, I am just wondering what router cutter do you use and which guide bush for the makita router like the one used in the video by Dan?

@Ultimate-roofing-square. Жыл бұрын

Hi Harry, I used a 12 mm cutter and a 16 mm guide. As long as the guide is 4 mm bigger, you can use a combination of any.

@dlite1972 Жыл бұрын

14:31 Taking a chance there…Not sure we can say stuff like that nowadays 😂

@Ultimate-roofing-square. Жыл бұрын

@@dlite1972 and that is the problem with the world now days. 😬

@dlite1972 Жыл бұрын

@@Ultimate-roofing-square. absolutely agree 👍🏻

@harryhalloran5079 Жыл бұрын

Perfect thanks Dan

@MrBuzzy73 11 ай бұрын

is it ready for rebated frames yet?

@markb1971 Жыл бұрын

Got a trend skeleton one . I'm not that happy with it . Think I'll give this a shot . Nice one Dan . When's it on sale ?

@SkillBuilder Жыл бұрын

now

@nathanrochfortsmith Жыл бұрын

Does it work with rebated frames

@Ultimate-roofing-square. Жыл бұрын

We will be making a pack out block to add to it.

@user-ex4gj3jh3c 11 ай бұрын

Looks like a nice jig but not convinced how well it will work on rebated frames . Most of my frames are rebated .

@Ultimate-roofing-square. 11 ай бұрын

We will have pack out block soon for rebated frames.

@rogerg34 Жыл бұрын

Just made a jig like this to fit 20 plus doors (see Bradshaw Joinery). This looks the business. I need to fit 3,5 inch hinges. Can it do that?. By the way I think you two guys could easily replace the Chuckle Brothers

@Ultimate-roofing-square. Жыл бұрын

Thanks Roger. I’m sure it will accommodate your hinges, it’s quite versatile. We are auditioning for a talent show soon.. 😂

@SkillBuilder Жыл бұрын

roger34. Please, not the bloody Chuckle Brothers. I could never see their appeal. Also while I'm here, can somebody explain the appeal of Mrs Brown's Boys? On second thoughts don't bother.

@rogerg34 Жыл бұрын

@@SkillBuilder Mrs Browns Boys - about as funny as hanging doors upside down.....

@Ultimate-roofing-square. Жыл бұрын

@@rogerg34I’d rather hang doors upside down than watch that rubbish…

@user-ex4gj3jh3c 11 ай бұрын

Where do you buy it from ?