Exactly! I imagine that you've fought with that annoying high pressure valve which you have to turn to change attachments while the machine is running? No more of that!

@@Something2LookAt One of those, 'why didn't I think of that', moments! lol.

@@stroutstergmail lol, yea, right? The concept was there all along. I'm quite surprised that it works. It pumps strong too! I can hold the hose up in my left hand while cleaning to keep it out of the way and it will pump up and over then down the hose, no problem. I think that the hose could actually be a lot longer if needed.

I had to rinse twice because i didnt einse well enough. This would have helped me.

You're using the wrong ball valve. U should use a dn-10 vall valve.

How is it? I'm eyeballing the 20inch unit.

@@davidneighbors5013 I got a 24". Works good but needs some changes to work better on a professional level. kzfaq.info/get/bejne/hN53mKt9y9jFoX0.html

You bet

@@Something2LookAt cool 👍😎

Indeed. And once you get the hang of it, your cleaning time is faster overall.

I think mosmatic was the first to do this on their surface cleaners, This Eveage SC in the video is a chinese knock off and their support sucks, they dont speak english, some of the extra parts were wrong sizes. If i could go back i wouldnt buy it cause now that i want to return it they dont speak english.

Hmm, now that's a very good question. I'll have to get back to you on that, but it does seems like that would work. Great idea!

From my own research, I can see that my pressure washer is blasting way stronger than the other ones that have demonstrated this attachment, meaning that most people are using lower powered machines and they are working. I really need to test this on my 2.8 gpm machine to know for sure, but I think it would work. It's a guess at this point though.

@@Something2LookAt If you do, please let us know, the reason I ask is because the lower the gpm the more accessible the tool is for "interior tile floor cleaning" (this expands the amount of business from a client) - thanks for responding 🙂

@@andrewleidner8142 Need at least 2000 psi and 1.8gpm. I asked Eveage before I bought mine.

@@andrewleidner8142 keep in mind that more flow gives you faster rotation of you bar. There for you can move abit faster. Notice he has a slow pace , which is correct for the gpm he’s putting out. So lower gmp slower pace, higher gpm faster your pace. That’s the million dollar question, how fast do I need to move. Hope that helps ,more gmp = higher rotation.

Yes, exactly

@@Something2LookAt thanks !! i might have to look in to getting one of these

I hope you can get one. They are running out of stock.

@@Something2LookAt How much did they cost?

@@Al_W_On_The_Trackz It's on their website for $599, but I think if it shows up on Amazon again, it'll be less.

I saw that. And Craftsman has one of those too I think. It would have it's purpose I'm sure.

Yes, you can feel a little bit of that. Which is why I'm glad it has wheels.

Well, the hose is held on by a hose clamp, so you could just clamp the right size PVC cap to it.

@Something 2LookAt if the surface has SH on it, is it diluted enough 🤔 to just blow into the grass???

Sure. I don't think you'd have to reduce the pressure. But if you're using it indoors, you might want to have it hooked up to the wet vac. It extracts pretty well without one, but the vac would insure against an accidental flood, like you see when I hit an uneven surface.

If you're talking about the brass quick connectors, mine came with some spares, in which you wouldn't connect them.

I'm using 4200 psi and 4.0 gpm

Yea, they're selling them again. You'll love it!

Oh, wow, no I didn't. Gosh, this thing is really solid and I've used it a lot at 4200psi. I think it can take it.

@@Something2LookAt most machines are labelled with psi ratings are max pressure, continuous psi is what's important. GPM is the same, handbooks or online pdf files will show both levels.

That should be working. You have more power pressure than I do.

It's listed as 5 meters.

Good idea. I ended up holding it there most of the time anyway.

All I can say is that I've had a number of the cheaper ones you mentioned, as well as the high quality commercial ones and this one is built to the higher commercial standard. Of course, even the commercial ones will eventually wear out. It's just a bearing. Anyway, so far still no problems with this one and I've used it a lot.

@@Something2LookAt Thank you for the info!

And to you too Brad. :)

It truly is. It amazed me, and I do this sort of thing.

Typically you would pretreat with that same mix but obviously you would not want to do that and then spray your yard. However pretreating makes cleaning soo much easier

That is a great idea!

Yes it can, but there was a limit to the temp. And I can't remember what it was.

This is law at the federal level so not just were you live and so many people have no idea until the homeowner gets a hefty fine

Just water? Or chemicals?

​@@samuelgonzalez1905 just water? Or is that with chemicals?

@@hisnameisiam808 correct any water with chemicals SH or otherwise cannot leave the property, the house doesn’t usually matter because it will just be absorb by the grass so you do need to make sure the grass is wet before you start. Driveways and areas close to storm drains you need a way to block the water from going into it and reclaim it.

​@@samuelgonzalez1905 ok cool. That's what I needed to know! I've seen so many people who, it seems, they just let it go.

Actually no, it's still very strong.

We did the test, about 1/3 of the flow had to go through the venturi tube. This design has been that for more than 20 years, but the loss of water is a big problem.

@@samgan1728 Yes. There is a trade-off. It sucks everything up, keeps areas from flooding, and you don't have to rinse, but it does go a little slower. Totally worth it in my opinion.

It's still doing just fine, it's high quality.

I am using a 4200 psi, 4 gpm machine here.

Just slightly lower, which surprises me.

No that's not going to work. I think that moss will clog up the nozzle.

@@Something2LookAt Would be helpful to have a shut off value was installed to prevent waste extraction in this scenario.

I'm sorry, when they sold them all they didn't restock. It's not available right now.

That would be a good option. It is handy that it works with no pump or external vacuum, but it is taking a major pressure washer to do it. There is a 3rd spray tip inside of the venturi nozzle. To truly pump externally and maximum psi and gpm by eliminating the 3rd tip, you'd have to cap that 3rd tip inside the nozzle. And keep in mind that this setup is basically vacuuming the sand and dirt up off the cement whereas a bilge pump would just be removing deep water. By just using a really really strong pressure washer you can use it the way it's designed and it will slurp up all the water, dirt, and sand eliminating the need for even a rinse! I prefer to use it the way it comes.

Well, for me it would be. My pressure washer is having no problem running this one, so I would feel confident that it could run a 24. I also have a 24 already from another company that I've been using so I know it can do it.

@@Something2LookAt I emailed them to as if my pressure washer can run the 24 and I'm waiting to hear back. It's going to be a few months before I can use it here in Wisconsin.

​@Random Acts of Video The rule of thumb is for each 1 gallon per minute equals 4 inches of surface cleaning. So if have a pressure washer that has 4gpm per minute, you would be at a 16 inch surface cleaner. You can go up to 20 inch surface cleaner and be fine as well by changing the flow tips.

Good point to mention, and hopefully common sense. I usually don't use SH or chemicals and I did not in this video either. Sometimes I will put it on at the end actually, on the freshly cleaned concrete so it really gets into the pores.

You can pumit into a 55 gallon drum.

Yes, they offered to send it to me for a video, but I kind of don't understand how often would you need to wash the undercarriage?

@@Something2LookAt constantly in the midwest. They salt the roads

Could you attach extraction hose along with the intake hose?

I'm speaking in regards to the wet vac

Disagree. Maybe not totally replaced but - definitely a game changer.

I know, right? And I was extremely skeptical about it too before I used it. I showed it in detail. It actually works and it's a major advancement. That's all I can do. Glad to have it myself!

​@@Something2LookAtwhere's the water ? don't you have to hook this up a garden hose? please let me know I want to buy one..thank you

Well said.

You will love it!!

Also looks like it's made in China? I hope I'm wrong.

@@hisnameisiam808 I asked a lot of them said that most of the surface cleaner on the market are produced in China

@@dariusfaye7194 I heard that the yellow one is from Canada but don't remember if it is manufactured there or not. Thought it was.

You don't have to rinse with that unit. I wonder if that balances it out to take about the same time as a clean and a rinse.

I have the same machine, and it works good around swimming pools and Koi ponds. Something that other surface cleaners will contaminate. It just an extra tool to have.

just put a shorter bar in

Yea, interestingly, I think it can be used indoors!

Well, I think we established that there is no vacuum needed, but the hose is keeping areas from flooding and eliminating the need to rinse.

Very good idea

Sorry, they're not selling them anymore.

@@Something2LookAt Still, worth telling him what they cost when they were available.

@@8SecSleeper Oh, it's because I don't know. I received mine for free to review and I never looked for a price. Now that I'm looking, it's gone. Sorry but I don't know, and that's why.

Rinsing at that point would be perfectly fine if need be. But post treating would likely negate that need.

Why would you have to rinse?

​@@Boodieman72 if there is bleach.

@@hisnameisiam808don’t you post treat with SH and leave it without rinsing at the end? Especially to remove any remaining lines.

@@brian-ls4dm some do. Some let it dwell for 10 minutes and rinse. Some do other things. It really depends on what you want to do. Around me I don't think the gubment would like it very much if I just left it but it goes inert very rapidly from what I've heard. I've also noticed that it rusts things out quicker(like deck screws even after rising. Needed to rinse more I guess 😮‍💨😬) when I just leave it so you can't leave it on anything that will oxidize.

I agree, it should be on Amazon. I don't think people realize how good this thing is!

@@Something2LookAt Yes because they have products on Amazon, but not sure why this particular product is not there.

Ha try looking at the prices of the Mosmatic ones lol.

Sorry. It's a review sponsored by the company who sells it.