Not enough drywall fasteners, clearly. Lmao. You're awesome, Benjamin, the Human Drywaller-Man.

Ben…all I can say is thank you. It was three years ago when I started to do small drywall jobs. I had no experience prior and made unbelievable mistakes. From having 1/4” gaps of overlap to leaving horrible edges from mudding. Ever since I found your channel, drywall has become my favorite thing to do. You’re patient and an amazing teacher. Thank you!

Between you and Evan (Honest Carpenter), you guys are legit! Love the real talk, comedy of errors and quality of work you provide! Thanks Ben! Great videos!

It gets me every time that a Carpenter is all about drywall. ;) That was a funny introduction. The tips were good. * hang ceilings first * not too tight, 1/4 inch disappears like crooks when cops show * 4 ft is a comfortable working height. * ensure there is a corner stud, :) or become a drill trickster * don't be dumb guard the thumb * careful planning or suffer There is more but those stood out. I only hope to remember them when its time for me to drywall.

I really need to start practicing that slide cut. Such a time saver.

"An ounce of prevention is worth a pound of the cure" - Havent heard that one before but it holds true in all aspects of life.

I'm doing this full time, got a guy who's taken me on so I'm only 7 months into Dry Lining. But my boss is 20 years in the job n just does the job without explaining a lot of little details. Which I have to learn on my own, your channel has helped me a lot thanks.

Me eating dinner watching a dude doing work - perfect! You’re so chill Ben!

As a carpenter, I would have shimmed/spacered the whole open studs to meet the old drywall thickness on the left… Then all the drywall meets up without lumps. Would prolly eliminate the hook you mentioned as well. But that’s the guy’s before you job, so I get this solution as well. I just finished a renovation in a 120-year-old house and nothing was standard, plumb, level or square… had to marry a lot of plaster work to drywall and many rooms were totally gutted and had to shim/build out almost everything just to get one seam to butt. Constant problem solving.

Got cold shivers down my spine when I saw the router standing bit upwards. An accident waiting to happen. Like the way you explain things and demo them.

Thanks so much for teaching this stuff! I hear people talk non stop about how much they hate drywall, and it's refreshing watching you enjoy what you do. Affer watching a few of your videos and understanding more of how everything works, I really enjoy doing drywall too!

Have to fix a rough wall in the bathroom. Will be using the level BEFORE I start to see where I need to float it out more. Always learn something new when I watch these videos. You’re a good teacher Ben. Love the humour as well.

Always keep the drywall off the floor.1/2...prevents the bottom of drywall from potential moisture/ mold situations

My first basement reno had major bowing of the studs, even though I was careful to orient them the same way. While I was shimming the low ones out, I wondered what a real pro would do, it took way too long. Nice work!

I am just about to hang 2 walls and a section of ceiling in our basement. Your 2 videos provided just the refresher I needed. Maybe I'll only make 3 mistakes. Thanks much

Amazing video series, thank you, please.dont stop making them, you are great! excellent camera presence, well spoken, humble, knowledgeable and very photogenic! I really like that you do it wrong intentionally to demonstrate why it is critical to avoid the mistakes.

For all non-native English speakers: Perpendicular | American Dictionary: At an angle of 90° to another line or surface: Two perpendicular lines form a right angle.

I swear I should start sending you a cut of each job with all the knowledge I've got from you. Thank you bro 🤘🏻

Your sense of humor and dedication to your craft really carry through.

even though this video is old....I've been to Vancouver, BC....That garage was water damage for sure... ;) Great city by the way. Thanks for reassuring me that I'm NOT a beginner... I watch your channel to get mudding tips, you're a great drywaller and a good carpenter.

Thank you Ben! We are hanging drywall tomorrow, so thanks for saving me from those mistakes!

This is such a cool series Ben!

No words! How cool is that? If you ever want a tv show for yourself... crazy good! Well actually you have it already

That's what you want to hear from your contractor - "That's good enough." @4:50

@Vancouver Carpenter...Thanks so much for this video series. I have never hung drywall before and I am about to attempt to drywall around my new shower and I'm pretty nervous. I now have a better knowledge of what to look for and how to fix mistakes. PS your humor makes the videos super enjoyable to watch also.

Thank you so much for these! I plan on redoing my garage soon, and these have been some amazing videos!

My friend, while teaching me commercial alarm installation, drove a self drilling screw into his thumbnail. This takes me back. In a decade of card access, cameras, and alarms I was always careful to have mt hand clear.

Hey Ben, Love the blood sweat and tears (of laughter) you put into your videos, takes a ton of time to do what you do and we appreciate it! Question, is there a reason you couldn't/didn't remove to old corner bead?

Dude, I've been doing this for over a decade but today it literally took me 3 hours to do two repairs. One of those if it can go wrong it certainly will sort of days

This series is awesome, keep up the good work!

im new to drywall, and i have found your videos the most helpful. your a great teacher. thank you.

OMG! These are the things I’ve wondered about for decades. Thanks so much!!!

I've learned a lot from your videos, thank you. We just never get to see the finished project. Maybe someday you could revisit some of the homes you've worked on and do a "before and after" video? Would love to see the cabinets after they've been installed in this one, and possible hear from the homeowner. (You should get picked up by HGTV or one of the networks soon!)

"Its obvious to the train eyes, Not enough drywall screws"? I am dead 💀🤣🤣🤣🤣🤣🤣

Nice tip on checking the wall for inaccuracies Ben and adding that vertical full length shim to make that wall a better look / flow... and Man... you using that drywall screw gun is like an added attachment to your hand... I've never seen a guy use a gun like you... zip zip zip... DONE... nice vid Man...! Lots of good examples showing the mistakes we can run into...! Thanks...!!!

Thanks for sharing your craft. Awesome videos and entertaining as well.

absolute legend mate cheers for all the effort

I love that the humour is as dry as the walls 🤣

Helpful tip don’t screw factory edge until the next sheet is up against it just tack a few screws it makes for tighter seems and looks cleaner and doesn’t bulge and break the beveled edge

on the homeowner to determine if joists stick out, that's funny!

great tip about the shims. done it loads on older homes.

Instead of shimming, would you ever plane down the protruding stud (assuming it's not structural)?

Corner bead removed would have saved at least half the thickness of the shim, or more. Possibly no shim needed. When cabinet guys hang on that wall, there will be plenty of cursing about the humps. Also, 12 foot long horizontal sheet would eliminate that joint and reduce the hump even more.

You missed a golden opportunity to ask people to thumbs-up your video when you punctured your thumb with that driver.. Great videos. 👍

Very helpful…thank you!!

curious why you didn't cut out the corner bead (instead of working around it).

this is how I work .Do one sheet after a caffeine fix, take a 3 day break and do another sheet ,beer break,lunch and a nap then go watch some TV ......

Just flip over the t-square next time

dot and dab some glue when doing double layer, especially on older construction. Even a line down the wall on those tricky corners without framing.

Mate you summed it up, that’s shoddy carpentry work. Unfortunately plasterers and decorators especially have to make good the shoddy work of carpenters And builders and it isn’t right. It really needs to be made a point of to be picked up by the contractor if they’re half decent

Ever use the collated attachment for the drywall drill? Makita, Milwaukee (brand I’ve got) and Hilti have one…curious to know if ever tried and if you like? IMO, gotta get used to and “know how to work them” cuz they can be finicky and jam, misfire, and so on and then it’s just faster to not use at all and go back to normal way 😉 Also find myself pulling out the old corded screw gun when doing a lot of Sheetrock

When I was moving some outlets in my 1982 house, I found 4 layers of "over hang" scraps inside most of my wall cavities.

So confused. Isn’t the hump just there because he drywalled over the end of existing drywall? If it was a clean install where the old was removed there wouldn’t be a hump, right?

Good info! I have been framing aprox 30 years, people don't take pride in their work anymore. I've also drywalled & set cabinets behind my own framing & others. People, crown your studs one way when your framing & before drywalling your lid & walls straight edge them! shim accordingly, your job will be SO much better in the end. I'll tell you right now, MOST contractors today absolutely dont give a shit & its all about blow & go to get your check! Totally sad.

20:35 God I wish that were true. Gotta carry around a box of shims to level out garbage framing all the time, some projects I'll even use the whole box in there alone it's ridiculous

that house in the building clearly didn't use enough load bearing drywall (if you know you know)

Bloodscene incoming.. the horror and gore seen in this video ;) hahahahaaha

That spinning philips head sure does hurt doesn't it. 🤨

Always keep your joints tight, kids 🤣 *Please don't block me from this channel 🤣*

Good job ...good explanation.....had me concerned at the start...but you pulled it out......i almost always pull the level string at 48 1/2".....and good job with the shim.....ive been there more than once.....an idea on a bowed stud....if bowed. into room...use your circular saw...cut 45degree into stud and nail the 45 slot in....will straighten the stud enough to help

I'm sure I'm missing the details but why not shim out the bare studs on the right to the level of old drywall on the left that you put a second layer over?

Hi, thanks for the awesome heads up. By the way, what's the advantage to a hatchet head hammer as opposed to a framing hammer or other more conventional tool?

Again, great tips Ben !! I have a question. Regarding orienting your drywall perpendicular to structure, if you have resilient channels or wood strapping horizontally on wall studs, I would think your sheet would then be installed vertically, since the resilient channels are now the "structure" you are attaching to .... ?? Thanks Terry

An ounce of prevention is worth a pound of cure. I’m gonna have to start using that

Hey ,question I remodeling my farm house here in Missouri. I gutted the living room removed a bedroom etc. I'm getting ready to do kitchen. How do you feel about a second layer of sheetrock on the ceiling.

I'm hanging a garage converted to an ADU. It has osb hung vertically on the walls can I hang the drywall vertically (joints staggered from the osb)? It cuts the joints in half.

At 22:46 one can observe the seldom seen Canadian suffrage dance to the drywall gods.

Here to watch you mess up a few drywall screws ;)

Ben, you can take the rip and set it back on the sheet to use the t square

Great video !! Thanks

PLEASE HELP: ANYTHING HELPS. I will be installing some melamine cabinets soon and the wall has plywood behind it. My cabinet backing is 3/4 I would assume the sheetrock is 1/2 and plywood 3/4 or maybe half? ANY IDEA on what screws I should use for extra strength any tips help thank you! I usually use 3” screws when I install these sort of cabinets but just the thought of the plywood behind it makes me worried. I know where the studs are behind the sheetrock and plywood but still. I was just thinking of putting Atleast 4 in each section and legs for extra strength TIA!! Anything helps thanks guys!!

I love your channel. I've learned a ton. I do have a question about hanging the drywall vertically. I have a small room that is 17x20. If I am not comfortable with taping butt-joints could I just hang the sheets vertically? I plan to also use construction adhesive on my studs as well. Ceilings are only 7'5". Thanks!

At around the 18 minute mark sounds like an important one to remember

I see a beginer mistake at 6.43 where you mark the stud do that before the sheet ks on the wall measure to the centre of stud and scribe it on the sheet with a pencil and if the stud is out of plumb go and sack the carpenter but if it is just chalk line it so much more efficient and saves time or even better pencil mark on the ceiling and/or floor or just eye it

Matt - I have a question for you on a trussed roof and attaching ceiling drywall. I think you know I am getting at regarding the issue of drywall lift on inside corner ceiling joints where they meeting walls as the seasonal changes create movement in the trusses to which the ceiling is attached. Have you ever used drywall clips? these metal clips appear to slide onto the edge of the ceiling drywall and fasten to the wall studs or top plate. Have you used these? I have standard width (okay, a normal width hallway, I don't know what its width is at the moment) hallway of which I am about to replace the ceiling drywall. The hallway run is perpendicular to the truss runs and the trusses are 2' apart. Should I fasten screws to the truss for ceiling drywall and stay a foot away from wall with screws and use these drywall clips? Any more ideas on isolation. Much appreciated. I spent 2 hours watching your videos last night. I am pretty good at drywall for a homeowner and you reinforce small issues that make a big difference. I love you when you have "challenges" on camera and laugh at yourself - too funny. We all have those times.

This may be dumb, but could you show how to repair drywall under a finished window? I guess, what do you do with that top joint... just caulk it to the existing casing... or fill it with mud and then caulk? I have to do something like this soon and I am just not sure how to handle that part.

great video, why not glue the drywall?

Love your videos, but im cringing so bad you went bare frame onto second layer drywall and blame the wall for that hump. Should have striped all of it of did a filler sheet(s) and then full overlay. Going to be tough for the countertop person, but mud can hide a lot.. I know, hide a lot of my own mistakes with surface mud blending.

I would have shimmed out the stud to get rid of the wave all together. But I'm on day rate

Have you recorded a video on using various vinyl drywall parts? end caps, j-beads, for example. When and how to use them

So the question I have is could you shim out the four studs to the right that are showing. This would bring the right side of the wall out. I do understand it would be more work, but would it not help when you begin mudding.

Should you remove your screw that went too deep if you put a good screw next to it? And is it a big deal if you ding up the drywall when your drill is set too deep?

I have a shop that has 10 ft walls. Should I still do the horizontal sheets or do I go 10 ft panels and do the sheets vertical?

I’m enjoying your videos! Trying to figure who you sound like. I’ve decided that you sound like a young Adam Corolla😅

I am working on my bathroom and had to take out drywall about 3 foot from the floor into a inside corner. What is the best way to repair this? Can you point me to a video? Thanks

I am a drywaller of 21 years in West Virginia...we glue (liquid nail) our drywall to the studs. We screw all around the perimeter of the sheet and only put 1 screw in the middle of every other stud on the walls...3 screws in the middle of sheet on all ceiling joists...holds way better than screws alone and saves a lot of finishing

In New Zealand the plasterboard manufactures under the GIB® Brand. Drywall to you guys is very commonly known down here is simply, at least to the DIY's, gib board. Another very common thing we do is again using the GIB brand install coving to cover the gap between the wall & ceiling. Just a question is it common to do the same or is it more that you fill that gap with mud?

Oh god, you mentioned the 2 foot joint from a water restoration. I really should have just cut the joint in my whole basement, trying to work that low ….horror

nice vid man.... but, it might have been easier, less work, mud, sanding : cut he stud to conform.... and possibly shave or remove the old board. Just saying, you'd get a better result with less troubles. Love your stuff👍👍

Why not remove the corner bead before rocking?

My math teacher in high school would like to 'erect perpendiculars' in geometry. We would say 'perpendicular' differently to make it dirty, 'purple ****'. I think VC would have gotten in on that back in the day.

Doing a ton of water damage after hurricane ida the 2 foot around the room cuts gave me ptsd

Hard to judge without being there but in some situations like that I would double tac that last sheet to bring that end out

Thanks again!

Canadian drywall humor is very dry, but it works.

Ok, I'm trying to understand something. 🤔 The vertical sheet was attached over existing drywall. The horizontal sheet was attached to bare studs on the right hand side; but on the left hand side, it was being attached over that small strip of existing drywall (that the vertical board is attached to). Because the horizontal board was not attached to bare studs on both ends, I would definitely expect the left hand side to be (at least) 1/2" higher due to the 1/2" thickness of existing drywall you are going over. There would def be a huge hump. Why not just remove the existing drywall and put new drywall on the bare studs the entire wall. Am I missing something? I know it's an older video, but I'm curious. Love your videos! I have several saved for reference. 🤗

I hate finishing behind others' hang jobs. I charge more to finish it if someone else hung it than if i hang it and finish it. Its amazing how many people qull still pay

Goes to show I don't know anything about drywall. Here I thought something happened to a load bearing structure.

Fun When you say laying down drywall. Here in Sweden the standard way to hang the drywall vertically. Don't know if I have seen a place so far where it is laying Down. Sure I'm only 20 so I have only worked for ca 2 years now but still that's a lot of places I've been to due to I'm working with waterdamages :/

hello thanks for your vids.. i think your pouch on your right side is great im trying to buy cant find it if you could help... thanks