Every Machine in my Shop: Would I buy them again?

Рет қаралды 99,535

Күн бұрын

Today we're looking at every machine in my shop and talking about whether I would buy them again. This video was requested by my excellent patrons.
Support Clough42 on Patreon: / clough42
Stuff in this video:
*This site contains affiliate links for which I may be compensated
Grizzly G0702 Mill: www.grizzly.com/products/griz...
Grizzly G0602 Lathe: www.grizzly.com/products/griz...
Precision Matthews PM-935TV: www.precisionmatthews.com/sho...
Tegara 690X 6" Mill Vise (Amazon*): amzn.to/3TMDjQb
Harbor Freight 4x6 Bandsaw: www.harborfreight.com/horizon...
Starrett Intenss Pro-Die Band Saw Blade (Amazon*): amzn.to/3cIVAKM
Evolution 15 Inch Cold Cut Saw (Amazon*): amzn.to/3qAiYRM
Evolution 14 Inch Aluminum Saw Blade (Amazon*): amzn.to/3TUqX8U
Jet JDP-17MF Drill Press (Amazon*): amzn.to/2xMIeeF
Shars D-Bit Cutter Grinder (eBay*): ebay.us/X2MgDJ
Baldor 332B 3/4HP Buffer (Amazon*): amzn.to/2GqOCMZ
NSK Emax Evolution Standard with Lever Handpiece (Amazon*): amzn.to/3FdKMBx
Carbide Burr Set (Amazon*): amzn.to/3DI15Fp
Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
00:00 Intro
00:40 About my shop
03:02 Grizzly G0704 benchtop milling machine
08:20 Grizzly G0602 lathe
14:44 Precision Matthews PM-935TV knee milling machine
19:06 ACRA ASG-618S surface grinder
24:02 4x6 Bandsaw
27:29 Evolution cold saw
30:28 Jet JDP-17MF drill press
34:04 Shars D-bit grinder
37:22 2x72 belt grinder
40:15 6" bench grinder
41:49 Baldor buffer
43:44 NSK Evolution pencil grinder
45:49 Conclusion

Пікірлер: 273

@grippgoat 5 ай бұрын

When I opened the vid and saw 46 minutes, I wasn't sure I'd make it all the way through. But I think the commentary, level of detail, and overall pace was just right. Now I'm in the part 2 waiting room.

@criggie 5 ай бұрын

Time flies - (specially at double playback speed)

@RobertBrown-lf8yq 5 ай бұрын

Me too 😃

@alexwbakker 5 ай бұрын

I did a similar exercise about a year ago. I sold half my machines since then.

@Clough42 5 ай бұрын

I need to do what with 3D printers.

@alexwbakker 5 ай бұрын

@@Clough42hey, at least those fit on shelves. I sold 2 extras mills!

@iampennochio 5 ай бұрын

The chop saw is great if you need ultra portability like throw it in the boot of a car and your off but the bandsaw is so nice and quiet. Not to mention here in ozstralia its $150 for chop saw blade and $30 for bandsaw blade. I would give up my hobby if it wasnt for the bandsaw. It saves so much mundane work and you dont even have to watch it while it does its business. I think the bandsaw is the most underrated tool in the metal shop. Its like a light, you take it for granted until its broke.

@jimsvideos7201 5 ай бұрын

The idea of the metal pads hanging down for camera mounts alone made this worth the watch. 💡💯

@marthinwurer 5 ай бұрын

You might like the ones that Inheritance Machining and Marius Hornberger made too.

@Shneebly 5 ай бұрын

Good concept. Too may videos are made in the initial excitement phase of getting a new tool versus after real use.

@Tritium21 5 ай бұрын

This is one of the few times the hand held camera did NOT make me sick. You have steady hands, good taste, or both.

@Clough42 5 ай бұрын

Also, a gimbal.

@2testtest2 5 ай бұрын

The gimbal helps for sure, but I have seen plenty of videos shot with a gimbal that made me sick. This one on the other hand was very comfortable, so well done!

@henrikskott 5 ай бұрын

I didn't even notice, so good job!

@marclevitt8191 Күн бұрын

I bet more people get sick when a gimbal shot is combined with a wide-angle lens. Also, I am sure it depends on how fast the gimbal moves around and other settings on the gimbal. I am sure this has been written about extensively in some film school books. 😀

@bruceanderson9461 5 ай бұрын

It is very interesting that my most used and loved tools are a luxury item in your presentation. Indispensable to me are my equivalent to a NSK grinder, my 3400 rpm baldor with 3m abrasive wheel, my Burking 2 x 60 inch belt grinder and a bead blasting cabinet. I can’t remember a project I didn’t use all of these on. I have a mill and lathe too but the above tools finish off the projects made on these machine tools. Of coarse as a hobbiest like you I can’t financially justify them but it is hard to justify a bar tab, golf club membership, a boat etc. I mention that just in case you have to have a conversation with your spouse!😉

@kwaaaa 5 ай бұрын

I really enjoyed the detailed commentary and you're audience-awareness on whether it was a good purchase and whether people in different situations would consider it as well. Also when I heard "when harbor freight had 25% off coupons" I had to wipe my tears, long gone are those days, lol. I purchased my first mini-mill while in high school with a 25% off coupon.

@DrJuan-ev8lu 4 ай бұрын

That drill press is perfect in your shop. Many of us get along with a lesser Sears Craftsman. Just keep a drill set close by and you will likely find yourself using it more.

@johnirvine3346 5 ай бұрын

Really enjoyed that video James. Stephan does them and even goes through every drawer! Seeing how others set up their home shops and economize on space is very interesting and helpful. Keep up the great work. You have helped me many many times with my own projects.

@christoph72761 5 ай бұрын

Well done and very informative! Thank you for putting the effort in to produce that!

@itiejim 5 ай бұрын

Great video, it's particularly good to hear about how useful you find each item rather than just how good it is at its job. Can't wait for part 2.

@billbyrd9845 Ай бұрын

Great episode. Would I watch it again? Uh... yes, definitely.

@GeoffTV2 5 ай бұрын

Thank you for a great video. I mainly love the maker content that you normally do but this was great and I look forward to another installment with yet more tools. Merry Christmas to you and you family.

@Zardwark 5 ай бұрын

Very interesting. Looking forward to part two.

@BhEaN 5 ай бұрын

I love these kind of videos... I really like your projects, so I like to see what tools do you use for them, that's for sure! Thanks for sharing!

@gofastwclass 5 ай бұрын

Nice run through video James. I liked the "would I buy it again" angle, too often people show off tools but never say if they would buy them again months or years later. I mainly fabricate automotive stuff, but have machines to aid in my fabrication and I don't have a chop saw. I've considered it several times but can't pull the trigger on one because I don't see the value with the stuff I build. I either use a clone of your saw or the DoAll for all my cutting needs. Slower, but more accurate and I'm not deaf when I finish using them.

@kentswan3230 5 ай бұрын

Loved the walk around and the machine vs use case analysis. Opened my eyes on some aspects of the shop. THANKS!

@barryweissburg6384 5 ай бұрын

Thanks for a closer look. I’ve always been curious about your lathe bench!

@richardrestorations 5 ай бұрын

now I'm getting workshop envy, great video thanks for sharing

@MichaelMamanakis 5 ай бұрын

I've been watching your channel for years now and seeing all the tools was a little walk down memory lane. It would be nice for you to do a similar video covering the the metrology, tooling and shop storage: drawer organizers, your new tray organizers, useful things you've printed for shop use, etc. I also find your personal transformation over the life of the show to be inspiring, so thanks for being a good example.

@davekellogg6819 5 ай бұрын

Yes: Please do a show-and-tell of all your 3D prints in the shop, and whether each was worth while.

@624Dudley 5 ай бұрын

Thanks James, I benefited more than expected from this video. It definitely takes time to establish the love/hate ratio for many tools, and the downside is less often told. Looking forward to Part 2! 👍

@henkbarnard1553 5 ай бұрын

I got a full-size Bridgeport mill into my basement. I had to take of the ram, the X-axis to get it in. Yes moving 3500 lbs around is a challenge.

@ianviljoen9036 5 ай бұрын

Would I watch a video like this again? Mmmmmyeah, I would, in a heartbeat, if you made another. Thanks, thoroughly enjoyed it.

@TheAyrCaveShop 5 ай бұрын

Very good video James, 100% agree on the knee mill... Merry Christmas 🎄🎄

@mduvigneaud 5 ай бұрын

James, I very much look forward to future videos in this series. I like seeing which machines you like and which you're merely OK ok and which you wouldn't buy again. The belt grinder is an obvious win: building a machine yourself is very satisfying.

@ScottDube1 5 ай бұрын

Great video James, Thanks!

@kurt7020 5 ай бұрын

Handheld cameras do often make me sick, but sometimes sacrifices must be made. This wasn't as bad as some. Thank you!

@tonyurquhart8278 5 ай бұрын

Thanks James. I sat down to watch this on a Sunday afternoon which is usually my “nanna nap” time! I watched & actually stayed awake! I really appreciate your honest & common sense approach to “would I buy this again”. Very interesting video. Probably I prefer your ‘Project’ videos but having said that I am also I’m looking forward to Part 2!

@brianatbtacprod1989 5 ай бұрын

This was a huge help. Basically it's tool test reviews. After seeing it, I will decide to buy different equipment than I had been thinking about. Also, you space is probably more like 90% of the people watching. I also like the references to other people tools, because they have also done sort of reviews. Thanks.

@frankpiazza953 5 ай бұрын

Great video. Best advice in all hobby shop videos so far. Frank

@KDrapsag 5 ай бұрын

I was glued from start to finish! I admire your likings.

@melgross 5 ай бұрын

According to the MSC catalog, as they sell the Bridgeport, the 49” machine weighs 1995 pounds. Shipping weight is more, of course, 2075 pounds. I don’t mind the loudness of a cutoff saw. Yes, I keep hearing protection near the saw. But then, I use angle grinders and they’re just as bad, so protection is needed there anyway. But until you need to cut a number of parts, you can’t appreciate how much time this saves. I did build a stand with foldable in and out tables, the out table with measuring to duplicate parts. I also built it with a rotatable table for 90 to 45 degree cutting. Yes, it does throw chips everywhere. I can contain maybe 60% of them and have to vacuum up the rest. A bother, to be sure. But both metalworking and wood working is a mess no matter how you look at it, so I just think of it as part of the mix.

@ChrisbottrellphotographyCoUk 5 ай бұрын

Great work James, would like to see more of the cnc conversion in use. Havnt see it in use for a long time!

@CxAgent 5 ай бұрын

Love this type of video. It is really hard to get this type of real world, user information except from people who actually use the equipment. Add the experience of 'would I buy it again' make this extremely interesting.

@jedsterr7546 5 ай бұрын

Liked the video a lot. Normally when you do a video, your shop looks perfectly clean and organised. Its good to see a little bit of tools piled up on machines and stuff like that. Makes it look more real.

@benkeller3 5 ай бұрын

Enjoyed this video. Thanks James.

@stevesloan6775 5 ай бұрын

That was great! I own one of those harbour freight bandsaws. I made a nice 6mm steel plate thats big enough to use it professionally in the vertical orientation, and also works fine in the horizontal mode. I cut some 3”x6” mild steel stock a couple of days ago. It did a great job and I love how you can turn your back on it when adjusted right. 🇦🇺🤜🏼🤛🏼😎🍀

@davidsorkin 5 ай бұрын

This is great! Would also love to see the tool cabinets. Those are an important part of shop design.

@michaellehmann280 5 ай бұрын

Really enjoyed this video James.

@dralexmclean 5 ай бұрын

Enjoy your channel, just discovered it. I have a PM lathe and mill and the comment about weight with the mill is true but I don't move mine around so yes it was a bugger to get from the truck to the inside of my shop (had to rent a fork truck) but it is lovely to use and rock solid.

@andrewcarlson2720 5 ай бұрын

Always interested in watching your videos!

@russtuff 5 ай бұрын

Nice collection! It's amazing how many machines one can ammas over a few years 👍

@g.tucker8682 5 ай бұрын

Can't wait for part 2

@aviator267 2 ай бұрын

This video really demonstrates and defines exactly what rapid prototyping is about The use of CAD and 3D printing and Slicing programs along with a practical need, project and problem to solve while we follow the journey of the various iterations Well done. I would recommend this exact video to anyone trying to see the value proposition of 3D printing as a hobby and skill to learn Well done and thanks.

@NeGRaDiCaLz 5 ай бұрын

Thanks for the video! I’ve been going back and forth between a harbor freight band saw and an evolution cold saw, and you have definitely confirmed my choice. I think the latest harbor freight saw has a coolant tank and pump which is also very desirable for me.

@bruceanderson9461 5 ай бұрын

My biggest mistake in purchasing machine tools were a cold saw (too slow) and a used surface grinder which is ok but doesn’t have the precision I want and I don’t have the skills to make it better. Glad you bought the new surface grinder!

@cletusberkeley9441 5 ай бұрын

Excellent video as usual James. I just got a Vevor 2x82 belt grinder in my shop and did a bunch of creature comfort mods to it (2x72 conversion, roll cart, water mist, LED worklight, glass platen, larger work-table, etc) I just love this machine. Looking forward to part 2 of your video. BTW you should really check out the Harbor Freight "Hercules" stand for the porta-band band-saws, they are magnificent (just got one in here too)😅❤

@HolzMichel 5 ай бұрын

a useful video format for sure! most of the machines featured i wouldn't buy after seeing this, so many thanks for showing their shortcomings. most of what we get out of china and taiwan are as you so eloquently put it: castings kits. they have to be upgraded out of the box in order to be a useful addition to the shop

@kimber1958 5 ай бұрын

Excellent video very informative

@scruffy4647 4 ай бұрын

Nice introduction of your video. What I have heard a lot of, and is very accurate for me, is that the initial investment on your machinery, does not compare to the continual cost of tooling your machines. The good thing is you don't have to buy it all at once. So, from an initial investment of your mill and lathe, I would spend the money and get the most optimized equipment you can afford. Getting a lathe with a quick change gearbox and cross slide power feed is huge. Buy once and cry once. Same goes for your mill. Rigidity helps a lot.

@theodoreshasta7846 5 ай бұрын

Terrific! Much appreciated.

@MicksWorkshop 5 ай бұрын

I totally agree with you on the band saw vs the Evolution. I ended up selling my Evolution and making a bunch of upgrades to my HF band saw. I did a 4 part video on the band saw upgrades if you're interested.

@m3chanist 4 ай бұрын

For a hobbyist maybe, if you are earning money from your fabrication and/or you don't have time to burn, a cold cut saw is indispensable. I have both, the horizontal bandsaw gets very little use any more, sweeping up every day is normal, it needs doing regardless.

@caseytailfly 5 ай бұрын

I have a PM-949TV and I have to agree it was a challenge to move, yours would be much less daunting. But boy is it a nice machine! I love your quill DRO, I’ll definitely be looking into that as an upgrade!

@EdwardEAnderson 5 ай бұрын

I won the same nakanishi grinder at the 2022 Summer Bash, it’s one of my favorite tools as well.

@OhHeyTrevorFlowers 5 ай бұрын

I bought a Vevor portaband saw that comes with a detachable horizontal milling stand which works great in my tiny workshop making small metal parts and occasionally tube steel frames. I intend to build a wall mount vertical sawing table for it so it can be used in three modes: handheld, horizontal, and vertical.

@johnsanford3596 Ай бұрын

Enjoyed the video. I am a tool junkie, I just welcomed a Baldor 6" buffer to my shop. Arrived today, it is still in the box, waiting for me to sort out a home for it. For a long time I wanted the 8" model you have, but realized it is serious overkill for my anticipated uses.

@user-em2eb6bu6t 5 ай бұрын

I like the video and look forward to seeing the Advid CNC router again.

@edwardaloftis6705 3 ай бұрын

Great shop James. Mine is a closet 8' x 16'

@DHouck 5 ай бұрын

Really appreciate the details and overview on each machine. James, would you be willing to do a video on your shop infrastructure? Square footage, electrical, lighting, HVAC, air system, dust collection, air purification, material storage, shop supplies, etc. Thanks!

@commadore129 5 ай бұрын

Bridgeport is your best bet. for long running and quality. I had a industrial hobbies 12z mill wont do that again.

@Know-Way 5 ай бұрын

Good stuff. I'll be interested to see how you go about fitting the new table to the G0704. It's likely it will need a new gib. Might want to order one if you haven't already. I enjoyed the video.

@makingtolearn 5 ай бұрын

I've used that NSK rotary tool all day every day for the last 12 years. They are incredibly well built and are hands down the single best rotary tool you can buy. There are a lot of different attachments for it as well- the filing attachment is really nice.

@bradleyburns7200 5 ай бұрын

Good job. Well done.

@scroungasworkshop4663 5 ай бұрын

Very enjoyable thanks. I’m in a similar situation as I have converted garage and I’m just an amateur as well. I’m also tossing up whether get rid of my cold saw and keep just my horizontal bandsaw due to space constraints. Also the blades for the cold saw are not cheap but it cuts fast. I find getting rid of tools extremely difficult. One big difference is most of my machines I purchased used as new was unaffordable. I’m looking forward to part 2 as I’m interested in your opinion on the electric brake. I purchased mine about 8 months ago (used) thinking it would be really helpful but I’ve only used it twice so far. I’ve had a bead roller for several years and only used it once. Cheers mate, Stuart 🇦🇺

@glgreetham 5 ай бұрын

Great show.

@Hogman72 5 ай бұрын

Great channel. Awesome shop update. I have a Evolution saw and do agree that even thought its cuts good, the noise is way irritating.

@cadewey6181 5 ай бұрын

It will do something that no other tool can do: cut threads and threaded rod without destroying the ends. The abrasive saw, the band saw, and any grinder will flatten the last thread so you have to run up a nut on both sides of the cut.

@alanjackson4397 5 ай бұрын

Great job with the handheld camera

@joshuaaldana8111 5 ай бұрын

Really enjoyed the vid, more like this please

@joemcgarry1106 5 ай бұрын

James, The two nicest lathes I have ever used were a Monarch EE, and the Hardinge HLVH. I have passed up on a Hardinge for my home hobby shop for reasons similar as yours, plus as nice as it would be to own one it would not add to my capabilities. I use a a Bridgeport, and a 9A South Bend lathe both from 1948.✌

@larryschweitzer4904 5 ай бұрын

Thanks for the great video. I'll make some comments on what I had in my hobby area for comparison. I was given a very old, Italian, slow speed cold saw. It is heavy, has a coolant system that I don't use. The head moves up & down on dovetails. Quiet, fast, almost machined quality cut. Chips don't fly all over. I spent nearly a week totally disassembling, cleaning, painting, fixing. Highly recommended. I have a 4x6 bandsaw, which after a minor amount of work is great for my use. I'm

@misterfixit1952 5 ай бұрын

Thanks for the walk thru and narrative. I appreciate your honest opinions about your usage and the cost of the tools you use every day and the speciality tools you have purchased. As a hobby machinist I am particularly pleased to note that my tool selection is remarkably similar to yours. I also purchased a G0704 to use while I upgraded my primary mill. The fact that I got it for only $800 made it particularly sweet. I would have CNCed the G0704 but instead got an amazing deal on a Denford Trident Pro VMC with an 8 place ATC, all ball screws, linear bearings, servos, and auto oiler for only $750. I also started out with a HF 9x20 bench lathe and have been quite happy with it after 14 years of mods. I recently moved up to a Clausing 5914 bargain lathe ($250) that needs a complete refurb but will make a great shop project as well as a great lathe upon completion (and the addition of a Clough42 ELS). I'm looking forward to part two of your shop tour and hope you have time to discuss your video setup as my dream is to also start a KZfaq channel to share my shop adventures as I get my shop and mostly salvaged tools into working order. Thanks for the inspiration.

@SwissplWatches 5 ай бұрын

Nice, thank you fpr posting this

@windrk_6754 5 ай бұрын

Just sayin.. one other potentially great option for the horizontal bandsaw would be to make it into a roll-in bandsaw, where the saw rolls into the work.. you could then cut long stock easily because the stock is stationary, and setup for small jobs becomes easier, like with a roll-in table. Not sure how it would be mounted to the wall, but might work.. Have considered this for my Grizzly 4" saw, which I love, & have done some complicated setups on to get around excessive milling which is great, but would be much easier with a vertical table and the roll-in feed.. Just a steel frame to hold some slides (or tracks & rollers?), figure out where to connect slides to saw, & an L- shaped table to let the unit roll in about 6 to 10 inches but still clear the frame of the saw. If someone is considering major rehap of a single lip cutter grinder, they should consider restoring something like the old KO Lee B600 grinder- they come up now & then... I came upon a Scripta single- lip tool grinder, & did even sharpen some end mills.. but setting up things are so much easier when you can set up the tool on either side of the grinding wheel, & can move & set real stops with linear travel. I now use the Scripta workhead, which was really nice, on the KO Lee grinder table.. Love this video... helping people starting up make more- educated decisions... Thanks!

@caseytailfly 5 ай бұрын

If you have space, and funds I would highly recommend a 12x36 gear head lathe. I have the PM version with the single phase motor and it is a beauty. Still not super heavy, but a joy to use.

@bruceang82 Ай бұрын

I do like your comments, but many of these tools IE grizzly lathe or the vertical mill have had so much custom enhancements done to them that they really aren't the same machines any longer. Love your videos & have subscribed.

@awetmore 5 ай бұрын

Good walkthrough, thanks for sharing that. It would be awesome if you could list the other channels that you mentioned in your video description. I had to skim back through to find the reference to blondiehacks (and appreciate it, her videos look interesting). I'm very curious to see how that Avid Benchtop Pro works out for you. I almost bought one when I saw your project starting, but then the Langmuir MR-1 was announced and I went in that direction. Now I have a very modified MR-1 with LinxuCNC and a CNCDepot FM30F spindle (thanks again to your videos there) -- it's great for my needs. On the 10x22 lathes I would also recommend to your subscribers that they watch for Emco Compact 10 and Super 11. Both are really 11 inch machines, can be had with large bores (my Compact 10 has a stepped spindle that can take 36mm stock until the left bearing, then it drops down to 25mm), optional camlock chuck mounts (D1-3 on my Compact 10), and the Super 11 has power feeds in X and Z. I have a full cabinet, but they can easily be bench mounted, the cabinet contains no electronics or motors, just storage.

@WildAcresFarms 5 ай бұрын

My favorite aspect of this wasn’t 👍 vs 👎… it was WHO each and every tool in the shop would and would not be well suited for. That’s a first, in shop tours / reviews and it’s makes this video incredibly valuable to all of us with our different needs. … I primarily do metal fab and mechanic work in my shop, absolutely no machining. Tool desires for me = polar opposite.

@Mike40M 5 ай бұрын

I fitted my horizontal band saw on top of a tool drawer. Paired with two foldable roller stands. Ergonomically much better. No problem with 20 feet stock. The roller stands also used on woodworking machines.

@ahbushnell1 5 ай бұрын

Video is great. I didn't notice it was hand held.

@halfstep67 5 ай бұрын

I enjoyed the video a lot. It is interesting to see what you prefer to use. I would like to see what is on your buying list for the future as well. I also have an Evolution saw that I mainly use for cutting aluminum for my cnc milling machine and it is great for that. I take it outside and make it snow. I live in the country, so the snow doesn't really matter in my gravel driveway. It makes too big of a mess for inside the shop, so I will buy a band saw some day.

@Cenedd 5 ай бұрын

A vote for the portaband and another thing with the cold saw. A bandsaw of any type is a massive quality of life improvement. First time you have to cut something like a 4" round of aluminium, you're going to want to go buy one! As a starter, Milwaukee do a 2½" 12V portaband that's great for cutting almost all the stock you'll use to length. There's a larger version but I'm even more space-constrained that James so I actually found it difficult to wield without hitting the wall...your space may vary :D If you're cutting flat stock, you're quickly going to run out of throat (stock hits the column) on a portaband. I've got a smaller hand-held Bosch metal cutting circular saw. It's good and contains most of the chips for the first ten seconds until the bin is full. After that, James is spot on....with the extra issue that if you're cutting ferrous materials (maybe just this one plate I had, I'm not sure) the chips become quite magnetic so everything ends up constantly covered in them.

@Nicholas-im8bd 4 ай бұрын

Speaking of grinders.. one of my most used toools is a 6" grinder with a flap disc on one side and a wire wheel on the other. Wear PPE. But it is very usefull too cllean up edgeds and stuff like you use your baldor for. Crazy what i find to use that thing for

@PaulSteMarie 5 ай бұрын

I have an Atlas/Craftsman 12" lathe, roughly equivalent to yours, and it was a royal PITA. I was really happy to replace it with an ERL-1340, which is a beast.

@davekellogg6819 5 ай бұрын

I appreciated the heads up overview shots across the shop from different angles. Other topics of interest: 1. Storage systems for materials and hardware. 2. Any task lighting/magnification equipment recommendations? 3. Storage systems for machine supplies and tooling. 4. Metrology show-and-tell. 5. Storage systems for electronics parts, supplies, equipment. I suspect that you have a lot of organizing goodness that isn’t immediately apparent. Also, preferred vendors for tooling, materials, supplies? Do you have an overflow area for storing bulk-purchased supplies? What is your policy for keeping materials on hand? Purchase exactly to project requirements? Buy extra?

@jonsaircond8520 5 ай бұрын

I'm right there wuth you on the cold saw. I used the same cheap used been through hell band saw. Thought I'd just love a cold saw but I'd rather use the band. It is nice having options

@titter3648 5 ай бұрын

Make a quick lock lever for the tailstock of the lathe. I made one for my benchtop lathe and it is one of the best things i have done to it. And it is a pretty easy mod. Just drill a hole in the casting, press in a bronze bushing, and make a eccentric shaft for the lever.

@JCWren 5 ай бұрын

I enjoy this kind of video, both from being exposed to makes and models of machines I don't know about, and the reviews. Looking forward to the next ones! BTW, you mentioned the servo motors being expensive. How practical would it be to use the servo motors that are used in sewing machines? You can get a 110V/220V 3/4 HP 4500 RPM motor rated for continuous duty with the controller for around $230, often less. The particular one I randomly pulled up specs for is the Sailrite Workhorse Servo Motor.

@Clough42 5 ай бұрын

Once you commit to ClearPath, the overall system price doesn't increase that much for the bigger motors, which is part of why I oversized them. I don''t know anything about the servos in sewing machines. We have one in the house, and it really has more in common with a CNC machine than the mechanical wonder I used as a kid.

@orangetruckman 5 ай бұрын

Can’t wait for part ✌🏻

@garrett9186 5 ай бұрын

If you where going to do the roll in saw conversion I would make the saw slide in not the table even though that would be harder to build.

@cogentdynamics 5 ай бұрын

I really enjoyed your video.

@frogandspanner 5 ай бұрын

My Chinese 9x20 looks very similar to yours, but the power feed is via a slot in the leadscrew rather than the threads. It's a rather clever way of not wearing threads when using power feed.

@rjay1674 5 ай бұрын

Please include your fixture table. I am in the process of looking at those now and I'm curious about yours after getting a glimpse of it. Thanks for doing these videos, they are very helpful.

@Clough42 5 ай бұрын

I am not an expert welder by any stretch of the imagination. I've been pretty happy with it in that it's heavy, it's flat, it's easy to move around, the holes are consistently sized and it's been easy to use every time I've called on it. I wish it was about 6" wider. But if it were, I'd find something else to weld and wish it was another 6" wider. Unless your name is Jason Marburger (and maybe even then) you'll always want a little bit bigger table. :)

@rexmundi8154 5 ай бұрын

I have the Hardinge HVLH and I’d like to add your electronic lead screw to it to do metric threads. It truly is a fantastic model lathe

@stevemiller9608 4 ай бұрын

Bandsaw is great accurate from the word go. In UK about £400, however the blade lasted 4 cuts, then I got a good blade. STEVE SUMMERS did a good video on making a coolant system and chip tray for one of these.

@stephencox4224 5 ай бұрын

That Jet Drill could be used as a Blanchard grinder with some easy modifications especially with the VFD conversion to lower the speeds, One simply has to convert that round table to be free spinning on adjustable tapered bearings or even angular contacts as grinding loads are light. Then one makes an adaptor to add a cup type grinding stone to the spindle and because the table is now free spinning with the table offset from the centreline axis spin the table up by hand bring the newly fitted grinding stone down in contact with the table and you will have a perfectly square to the stone table surface with that blanchard ground finish used on flywheels and disk brakes among other items. A commercial flywheel grinder to do the same job will cost upwards or $10,000 and probably a couple of thousand used

@martinbeaumier7172 5 ай бұрын

You have what i have been dreaming my whole life and working to get.. i own lots of tools but still need machines 😕

@akschu1 5 ай бұрын

Camera work was great, and it felt more personal. Kinda like going to your machinist friend's house and asking what works and what does't and getting the straight answer. I also have a G0602, and don't feel like it's a very nice tool overall. I wish there was a Taiwanese lathe this size, because I'd totally upgrade for something in the 7-8k price point if it was tight and I didn't have to play with gears. That said, I do have the parts for the ELS, but like your drill press, it's not happened yet.

@huddleberryfin 5 ай бұрын

I have a portaband on a stand (purchased first), and bought a similar 4x6 afterwards. The 4x6 is a much better purchase. Not even a comparison. Portaband was purchase due to space constraints (I’m tighter then you). It’s hardly used now. I mounted my 4x6 on a pivoting swing out in my welding table, and doesn’t take up any room in the shop when it hides underneath.