EVERY SINGLE Clone That Disobeyed Order 66 [Canon + Legends]

  Рет қаралды 28,089

Vader's Fortress 2

Vader's Fortress 2

Жыл бұрын

When Palpatine issued Order 66, directing all of his clone troopers to betray their Jedi masters, the whole Jedi Order was decimated in an instant. But many of the clones had grown attached to their Jedi masters in their short time in the universe, and executing them was the last thing they wanted to do. Some clones managed to disobey the order to spare their comrades, while others merely missed the order’s execution.
All clones were created with a biological inhibitor chip implanted into their brains. These chips were originally the idea of Jedi Master Sifo Dyas as a contingency in the event a Jedi should go rogue. The chips were, however, repurposed once the Sith took control of the project to force them to thoughtlessly follow order 66.
In canon, there are only a few clones, that we are aware of, who have successfully removed their chips. Rex, commander of the Republic’s 501st Legion, had just sieged Mandalore and captured Darth Maul alongside Ahsoka Tano when he was ordered by Sidious to execute order 66. He was given special orders to kill Ahsoka, despite the fact that she was no longer affiliated with the Jedi Order. Disturbed by the thought of murdering his close friend, he tried to suppress the urge to kill, but inevitably his will buckled and he began shooting. After evading this attempt on her life, Ahsoka devised a plan. With the help of some astromech droids, she stunned Rex and had his inhibitor chip removed. The pair faked their deaths and parted ways, both retreating to the outer rim to live in exile.
Rex then met with commanders Wolffe and Gregor, both of whom had removed their inhibitor chips at some unknown point during the clone wars. Though it has been suggested by one Clone Wars writer that Wolffe did in fact adhere to order 66. Riddled with the guilt of his actions, he subsequently removed his chip.
Together the three of them lived in a modified AT-TE on the desert planet of Seelos. A few years prior to the Battle of Yavin, the trio were visited by the rebel Spectre cell, who requested their support in battling the Empire. Initially rejecting the offer, Rex soon changed his mind after an Empire assault destroyed their home. Wolffe and Gregor remained on Seelos and salvaged an AT-AT walker from the battle to convert it into their new home.
Clones with genetic mutations were usually immune to order 66, as a result of their mutations interfering with the function of the inhibitor chip. Experimental Unit Clone Force 99, better known as the Bad Batch, was a special forces unit initially consisting of four clone commandos that were designed with genetic enhancements. But ultimately they were a squad for clones that broke the mold, and would later take in a genetically normal fifth member.
The Bad Batch were deployed on Kaller, aiding Jedi General Depa Billaba and her padawan Caleb Dume, when order 66 was issued. Depa Billaba was gunned down, while Dume fled the slaughter. The majority of the Bad Batch were resistant to the order due to their genetic mutations. Echo, the genetically normal fifth member, was also immune as a result of his cybernetics interfering with the chip. However one member, Crosshair, was partially affected by his inhibitor chip. It did not completely corrupt his mind, but his free will was limited, and he began shooting at Dume. Crosshair was knocked unconscious and Dume managed to escape with his life.
Within days of the Empire’s creation, the Bad Batch would flee its grasp, with the exception of Crosshair. Despite having his inhibitor chip removed after order 66, he remained loyal to the Empire after questioning the Bad Batch’s purpose.
The squadron that executed Depa Billaba during order 66 was led by clone Commander Grey. In the days that followed, Grey and his unit hunted the escaped padawan, Caleb Dume, down. Grey’s conscience weighed on him during this time as he questioned the validity of the order. Eventually the padawan was captured. The unit were going to execute Dume when Grey distracted them for long enough for Dume to escape. Grey blasted the ship’s controls, disabling them and causing the ship to crash, consequently redeeming himself for his actions during order 66.
Finally we have Kix, a clone medic from the 501st Legion. After seeing Tup seemingly lose his mind and murder Jedi Master Tiplar at the battle of Ringo Vinda, Fives informed him of a scheme he had uncovered to kill the Jedi. Upon acquiring this information, Kix became curious and commenced his own personal investigation. He eventually confirmed what Fives had told him, but the separatists captured him before could notify the Jedi, putting him in a stasis pod for transportation to Count Dooku.

Пікірлер: 118
@D_eputy
@D_eputy Жыл бұрын
As i know, Captain Rex is the Commander of the Torrent Company.
@westopher3615
@westopher3615 Жыл бұрын
The Fulcrum sabers (Ahsoka's) I think are amazing. Lots of Jedi/Sith have dual sabered before but due to Ahsoka's being of two different lengths, each having its own speciality makes them unique and one of a kind.
@fanaticdrop8586
@fanaticdrop8586 Жыл бұрын
I prefer Count Dooku's lightsaber due to the fact that the hilt exhibits an unorthodox angle, consequently materializing unorthodox motion within the lightsaber. I would desire the implementation of a sonic shock producer upon the back section of the hilt. The sonic shock would exhibit an amplitude sufficient enough to rupture sectionals of the skeletal anatomy of the opponent, including the auditory ossicles ( permanently terminating the ability to hear ), the metacarpal, carpal and Phalanges bones ( Terminating the ability to utilise the hand ) etcetera.
@jenniferbrewer5370
@jenniferbrewer5370 Жыл бұрын
I think they lied to Crosshair. I don't believe they took out his inhibitor chip.
@JohnDoe_Gaming
@JohnDoe_Gaming Жыл бұрын
My favourite hilt is the one Starkiller gets if you do the Dark Side ending in Force Unleashed 2. I love the forked end that can stab without being turned on, but I'd like it even more if it had Dooku's curve. That's the lightsaber I'd make if I was a Jedi or Sith, then I'd use a Ghostfire Kyber Crystal or a purple one.
@apapz3245
@apapz3245 Жыл бұрын
“ReMoVeD hIs Chiiiiiiip” “DeStRoYeD ThEiR hoooooome” “OrDeR SiXtY Siiiiiiiix”
@TheGoldenEagle14
@TheGoldenEagle14 Жыл бұрын
Lol. Bro I'm saying to myself, "why the hell does this guy talk like that?" It's really annoying.
@CatTechSupport
@CatTechSupport Жыл бұрын
@@TheGoldenEagle14 The answer is British accent plus slow places.
@Mr.Manta5988
@Mr.Manta5988 Жыл бұрын
Will you make a video on all 150 orders?
@hoaximus
@hoaximus Жыл бұрын
Guess I’ll put my ideal lightsaber idea here, been looking for a display anyway! Hear me out guys. A single-bladed shoto lightsaber, taking rustic inspiration (namely Darth Malgus) in putting a singular spike near where the blade would pop out, as an additional melee weapon. The blade would be white in color (taking modern inspiration from Ashoka Tano). In addition, the saber would contain a sort of switch to switch the power source to a Krayt dragon Pearl, producing a different color. It would also have, in small engraving, the words “Through balance, my chains are broken” (the final tenet of the gray Jedi code) in Aurebesh. The bottom of the saber would have a bulb of Wroshyyr wood from Kashyyk. This would ideally be wielded with a side blaster. Honest thoughts?
@Predatalien
@Predatalien Жыл бұрын
My ideal lightsaber would be a double bladed lightsaber with Cal Kestis’ emitter but with Luke Skywalker’s body of the lightsaber with a purple blade. The colours of the lightsaber body would be bronze with white details and the emitter would be gold.
@xallenjr
@xallenjr Жыл бұрын
My Ideal Lightsabers, are for duel wielding, main saber in my right hand, shoto saber in my left. They would be straight hilts, how a simple saber would look, main saber about 10 - 11 inches in length and an identical shoto saber about 2 inches shorter. Both sabers coated in brushed gold from head to toe. The body would have thin vertical indented lines along it for comfortable grip, spinning and flourishes. There would be 4 thick black lines around the emitter with a column of horizontal windows in each line and a matching pommel with a milled grip detail. The windows would stand out the most when the sabers ignite a blue blade and would especially be an elegant contrast to the gold of the saber and be a nod to my college colors. The primary blade length of my main saber would be 36 inches, while the shoto’s primary length would be 26, I say “primary” because both sabers would secretly have the dual-phase function, allowing the blade’s length to be adjusted between 20 - 37 inches during combat, completely throwing off an opponent if constantly switching sabers between hands. The name of these Sabers is ‘Exodus’ & ‘Exodus’ Shoto, Exodus meaning a mass departure/retreat of people, so in this case, when you see me, it is time for your whole crew to leave. My second constructed lightsaber would be a coming-of-age saber, one where I am no longer a young, prideful apprentice but a humble, newly found Knight understanding of the Force and on the verge of mastery. The straight hilt would be about 12 - 13 inches in length, slightly longer than my first main saber. Designed around a profile shape, with body features lathed and milled details with an indexing ring making gripping the saber effortless. Featuring an angled emitter with horizontal oval windows on the flat sides of the saber, mirroring the details all down the saber's body, switch, and pommel section. It will not be entirely gold this time, but a balance of brushed gold and black (Story wise: having used parts of my damaged shoto saber). The flat sides are black, the rest of the saber is gold. The Krystal used for this saber would be a Danderi Crystal, where the blade color that would change based on the wielder’s connection to the Force, and In my case, I actually see myself with a silver/white blade, it would in fact contrast well with the black windows of the emitter, making the light from the saber especially pop at night. Another ability as learned from the video is that the Danderi Crystal is also being able to recycle the energy from a battle and recharge the user’s energy to stay alert and keen to the Force. And because of that, I would name this Saber ‘Rebirth’ for the essential replenish of energy the Krystal gives when ignited and the silver blade representing true balance of the force, allowing one to rise above most who only see conflict. This saber will not have a shoto, but instead will be utilized alongside my ‘Exodus’ saber for dual wielding, due to losing my Exodus Shoto in battle, (story wise). My new ‘Rebirth’ Saber will go in my right hand, while my original ‘Exodus’ Saber will go in my left hand.
@shawnhinton8336
@shawnhinton8336 Жыл бұрын
I always wanted to see the idea of a more feral style of lightsaber realized. Maybe a dark side force sensitive alien that doesn't have practical hands so instead has some form of glove with "light claws". Would be awesome to see a jedi battle with something that may even be intelligent but fights almost like a wild animal.
@demanien7722
@demanien7722 Жыл бұрын
Yeah man i can imagine this myself. Amazing idea man 👍🏻 Maybe some sort of Alien with like sharp lightsaber daggers on his back, on all fours, acting like a wild blood thirsty bayblade, primitive but not stupid. Not able to live in society but living with his "god" or his "ancestors" maybe force sensitive with his own way of being connected to the force, bringing honor to his elders, being the last of his kind. Cuts himself old runes in his own body, returning to life through dark magic everytime he dies fu*k yeah man
@Tate_adkins
@Tate_adkins Жыл бұрын
Revan’s lightsaber because of the the metal blade like thing on the emitter
@markdobai043
@markdobai043 Жыл бұрын
Describing my ideal lightsaber: • Wield: Jar'Kai. I would love to dual wield lightsabers like Ashoka, Ventress, Starkiller, Maul and Revan (in a vision) did. • Hilt: The base of the hilt would be made out of the alloy of beskar and steel to make it shiny. The beskar would help to make it light but extremely strong at the same, even though the mandalorian Armorer would send me to Mandalore to get clean of my sins for using beskar to make a weapon. Anyways, the hilt would contain some black details to contrast the shininess of the base, after it's an elegant weapon for a more civilized age. The bottom would be curved downwards a little bit like it's on with the Defender hilt from the Jedi Knight: Jedi Academy game. • Crystal: - Color: My favourite lightsaber colors are red and yellow. My affiliation of the force would be on the middle but a little bit closer to the dark side. I always liked the sith better. But I would also use the force to help my loved ones by imposing my own will and desires on the force. Why not purpe you may ask? Because, for me using a red and a yellow lightsaber would be the mocking for both the jedi and sith too. - Type: I would use 2 in each to alter the length of the sabers. Dantari and Qixoni crystals in the red one. Meditation and Mantle of the Force crystals in the yellow one. Dantari to recycle the fury of the battle and also regain used force energies faster. Qixoni to increase the heat of the blade and enhance my force potential. Meditation crystal to have a better connection to the force and to regain spent force energies while in combat and the Mantle of the Force would help me to increase my force powers. The quiet similar but unique in a way. But I think I would be just as happy with The Revanchist as with my dream lightsaber if I fortunately won the giveaway.
@crazyjack746
@crazyjack746 Жыл бұрын
Very informative video, thank you!
@aloysiuskalligunderratedsi8861
@aloysiuskalligunderratedsi8861 Жыл бұрын
Thank you
@Sivartius
@Sivartius Жыл бұрын
My ideal lightsabe would have a forward slanting crossguard, it would be made of beskar, so the color would be a dark silver grey, with blue and gold accents. When not in use, it would be hidden inside a walking stick, but in combat it could be wielded as a regular lightsaber, or attached to the staff to be weilded like a Naginata. The base of the hilt would have a beskar prong to catch and trap a lightsaber blade. The grip serrations would be a diamond pattern, with the grooves colored dark blue. The actuaton would be (or in a replica appear to be,) a thumb print scanner. The emitters would be gold colored, and would small vertical slits in them. The central emitter would have a level end, but the two angled crossguard emitters would have slanted/angled emitters that have the long end on the wielders side, and the short end closer to the enemy. There would also be a clicking roller used to select colors.
@KNB3831
@KNB3831 Жыл бұрын
My ideal lightsaber would be a double sided lightsaber with one side of the hilt silver, the other black, the silver end would have a blue lightsaber color, the other side would have a red lightsaber color. The silver side would have Endo Cordavas emitter and the black side would have Darth mauls, it would be separate able and yeah, also absolutely love the content my guy, your so frikin underratted!!
@ashishkumarjha511
@ashishkumarjha511 Жыл бұрын
The ideal lightsaber which I would like to see would be blade with a small tilt (like dooku) and a guard around the handle (like the traditional swords or the exalibur) as it can save the duelist's hand in the battle. The coolest thing according to me though would be the ability to absorb energy from the strikes by the opponent (Sort of like the BLACK PANTHER suit works). It would be really cool as it would absorb the blaster bolts fired aswell and then along with slicing perfectly it would also be able to create a small explosion while attacking so it would be easier to deal with a bunch of enemies like a group of storm troopers or droids . It would have all the qualities of the tilt from Count Dooku's saber. It's a bit over engineered but perfect for me !
@pokedwar9376
@pokedwar9376 Жыл бұрын
Either a lightsaber design based off of Ridicks blades or a Great Saber like a great sword are ideas I personally love
@azangothinambo657
@azangothinambo657 Жыл бұрын
Idc if pple hate this guy he is awesome
@doommachine5062
@doommachine5062 Жыл бұрын
Excuse me, Could you do a sci-fi versus video pitting the Geth of Mass Effect versus CIS of Star Wars?
@prawnvr8598
@prawnvr8598 Жыл бұрын
What about the clone that deserted that rex found in the clonewars
@Koware
@Koware Жыл бұрын
The deserter clone named Cut didnt do the order because they were no jedi nearby so he didnt disobeyed it and also didnt do it
@prawnvr8598
@prawnvr8598 Жыл бұрын
@@Koware yeah but he said at the start disobayed and missed order 66
@Koware
@Koware Жыл бұрын
Maybe he forgot, he appeared in one episode of 7 seasons 20 episodes each
@prawnvr8598
@prawnvr8598 Жыл бұрын
@@Koware tru i was just saying that he missed one no criticism
@Anime421
@Anime421 Жыл бұрын
@@Koware he also appeared in bad batch as well
@mattzdlo9762
@mattzdlo9762 Жыл бұрын
I think my ideal design for a lightsaber would be a normal doublebladed lightsaber, but one side is detachable. This side should have a rather tiny blade and a short lightsaber hilt. The purpose of this is that you should throw it out at the beginning of the fight and just fight with one blade, while keeping the other one inside your control with the force, but away from the fight. Then, when the time is right, you get this tiny lightsaber back to you with the force, catching the enemy off guard and either strike him directly from behind, with the short blade or, when he deflects it, from the front with your normal one. It would be pretty ideal for me, because I like fighting with strategy.
@mattzdlo9762
@mattzdlo9762 Жыл бұрын
It would also have a design, so you can't really see, when the other blade is missing, so the enemy doesn't even know about the other lightsaber. The normal lightsaber would also have a shatterd cristal inside of it, so you can have a crossguard lightsaber, that protects your wrists. I think I would also let it be curved, because I won't really fight with the short blade on the other side and a curved lightsaber is more effective against other lightsaber weilders. So the lightsaber would be mainly built to fight other people with a lightsaber, but can still be used as a weapon against blaster users.
@ominousintrusivethoughts3947
@ominousintrusivethoughts3947 Жыл бұрын
For the contest) My ideal lightsaber would be a sith Saber with a smaller handle with unique Zeffo type of designs on it, it would be a bronze color with planting on the designs around it, the blade color would be red but it would have a short blade on the other side that is orange, (to represent energy and fire(it could also be black, to show darkness, hate, emptiness and aggression)). There would be handle guards around the emitter. The design fits my personality, (not the colors seeing as I'm not a heartless killer) but because it kinda just feels right to me. Almost like a kyber. And mainly because I've had an attraction to the mysteries of energy, and darkness (Also its been a while since you posted, Nice to be back)
@kanjo1636
@kanjo1636 Жыл бұрын
The Body of cal kestis' saber but with golden finishes and some engravings along the horns also the horns would maybe move back a bit after ignition
@UnFAMiliartoast
@UnFAMiliartoast Жыл бұрын
My ideal lightsaber is a double-bladed darksaber. Cool and original
@mcflyingfury
@mcflyingfury Жыл бұрын
I have two ideal sabers. For my right hand I would use a tri phase single blade. The hilt would be made of an Ultrachrome-Beskar alloy similar in appearance to carbon fiber but with a solid metal feel. It would be black in color and there would be some [insert Star Wars equivalent for rubber here] grooves on the sides for grippiness. Look up the Praetor Hilt on wookieepedia - it would be similar to that but it wouldn’t be cylindrical, more like an oval stretched into three dimensions if that makes any sense. There wouldn’t be any switches or buttons on the hilt, as I would use the force to activate and direct the blade. The emitter would expand slightly from the hilt, and have sharp angles. It would redirect the basic form of the blade into a thin edge instead of the traditional cylinder, making it more sword-like. The emitter would also have a small barrier of sorts in place of a crossguard. I don’t want to be losing any hands, but would love for the saber to be relatively low profile and easy to transport on my person. Building this saber would be a daunting task. I have designed it to include three kyber crystals, which is canonically possible, but is exceptionally complicated and takes a lot of effort and luck to align properly. My three crystals of choice would be: an indigo Mestare, a black Dantari, and a dark red Qixoni - in order from emitter to base. The middle crystal (Dantari) would form the core of the blade and my connection to it. It reflects the force alignment of the user, which for me would be warrior spirit and neutral politics, causing the predominant color of the blade to be black - although slightly more fuzzy and opaque than something like the darksaber which is pretty shiny. The Dantari crystal would also rechannel force energy lost in combat back to me, increasing my endurance, strength, and focus. The blade would have deep red crackles and streaks due to the bottom crystal (Qixoni), giving the illusion of electricity surging through the blade. This crystal would significantly increase the temperature and power of the blade while also enhancing my own force abilities. Finally, the top crystal (Mestare) would have an electrotropical indigo color, and would allow me to cut through cortosis by projecting a field resistant to energy feedback. This crystal also has the unique trait of reshaping the blade, causing it to curve very slightly - almost like a katana. The indigo color from the Mestare crystal would normally not be visible, only appearing when the blade projects its energy feedback resistance field (EFRF), where it would replace the deep red streaks temporarily. These are the best renditions I could come up with using alt code characters. The vertical one is pointing downwards, while the horizontal one is pointing to the left. Try to merge these together in your mind. ╥ ▒ ▒ Ʊ±±±±±±≤ ▒ Ƞ For my left hand I would use a dual phase shoto with one crossguard. The crossguard and hilt would be made of Zillo beast hide with patterns engraved throughout. I would color the patterns different degrees of gray and black and leave the natural base color. This hilt would be a couple inches shorter than my primary lightsaber, and would be more smooth in its design. The shoto wouldn’t be cylindrical, but would have an oval shaped blade, emitter, and hilt. Once again, no switches or buttons on the hilt - the force exists for a reason. The shoto would have one crossguard pointing at an initial 55 degree angle from the main blade, and it would curve upwards as it traveled away from the hilt. Think of something like Maul’s lightsaber cane, but smaller. The emitter would be very simple and retain the smooth nature of the hilt. It wouldn’t be pronounced but would simply curve into the main blade. The base of the hilt (pommel?) would taper to a rounded point. Although easier to construct than my primary Tri-Phase lightsaber, this dual phase shoto would still require a considerable amount of effort, simply due to the unique crystals chosen. First I’d travel to the planet M’haeli and search the mountains for a Nextor crystal. These crystals naturally produce extremely volatile and unpredictable, yet devastatingly powerful blades. Only by developing a deep personal connection to the crystal itself over the course of several years can one hope to master the blade. The Nextor crystal only naturally comes in one color, a creamy gold-white, which gives a lightsaber’s plasma blade a shimmery gold appearance. In my opinion, this shimmering gold color would compliment the Zillo beast hide on the hilt. The second crystal I would introduce into my shoto would be a Ghostfire. Although these crystals are notorious for growing inside of invisible rock formations in the Outer Rim, they are in actuality quite common in the galaxy compared to many other kyber crystals. I would simply use the force to call out to them and hopefully that would work lol. The Ghostfire, as its name implies, produces an invisible and completely silent blade. Using this in conjunction with the Nextor, the Ghostfire would be the dominant crystal as far as appearance goes. The only time the shimmering gold blade would ever be visible, is if I decided it would look cool. The Ghostfire also has the ability to produce glitchy and laggy afterimages of the blade and user - this would be very beneficial to confuse and disorient enemies in combat situations. Also, after gathering a Stygium crystal and implanting it into some powered Duraplast armor, I could go full stealth mode with the shoto if the situation required.
@HerobrineXGamin
@HerobrineXGamin Жыл бұрын
Wow and mine would just be a scythe saber
@jakublizon6375
@jakublizon6375 Жыл бұрын
You have thought way too much about this.
@mcflyingfury
@mcflyingfury Жыл бұрын
@@jakublizon6375 I haven't thought enough. If you haven't noticed I've put the same answer for the last like 8 videos. I'm trying to think of new things but I'm not a very creative person lol. If you think I overthought my lightsaber just wait until I describe what my favorite personal ship would be.
@mcflyingfury
@mcflyingfury Жыл бұрын
@@HerobrineXGamin Honestly a scythe saber sounds epic.
@Reasonable_Fun_6709
@Reasonable_Fun_6709 Жыл бұрын
Contest: I am trained with a bow staff and escrima sticks, so something that has two blades that can be put together (darth maul) and taken apart (like how asohka) has. If I had to reference my favorite hilt design (not for utility), it would be Darth Revan.
@hitmanxish
@hitmanxish Жыл бұрын
Guess I'll put my lightsaber idea here too lol. Honestly I think a lightsaber similar to Cal Kestis with the ability to disconnect and create 2 separate lightsabers or one long one with one having a curved handle to create a bit of a curve to make it slightly harder to predict the exact location it would strike from. I would also have it with a color changing hilt or easily changeable hilt so I can conceal it in whatever clothes I wear and it blends in with me and my surroundings. I would also want to add a quick eject and ignition option for situations where I may have to fight quickly. An example would be if I was surrounded I could use the quick eject and ignition to throw it into and enemy blade first and distract the others while I pull the separate blade from my arm or where I chose to store it and attack the person next to me and so on and so forth. As for color probably yellow or orange something that isn't seen often to create the illusion that I might be a jedi (if this was post order 66) while still leaving enough doubt based on color alone
@singe7257
@singe7257 Жыл бұрын
An ideal saber would be a dueling hilt like count dooku's but with a purple blade
@klef6287
@klef6287 Жыл бұрын
what is the name of the pirate who found kix? like how do u spell it?
@Mr.Manta5988
@Mr.Manta5988 Жыл бұрын
11:45 Me as a german: Hmm... That looks...familiar...
@alex45bg
@alex45bg Жыл бұрын
My ideal lightsaber is a bit shorter in the hilt than a lightsaber pike. He had 2 lears of beskar at the side of the hilt and 3 at the bottom so it can be more balanced. The sides were painted black and red. The blade was short and it was a bit curve. The color was red-orange and the lightsaber's name was flame. To activate the saber you need to use the force that was the only way to ignite the saber. It was really hard to learn to use it but tough to defend against. The blade was reacting as the user if the user gets mad the lightsaber becomes unstable. The lightsaber was very uniquе. The crystal was my idea and I even created his own character he's name was X and he was a Jedi-type warrior. He tried to use the force ability he read in the archives that luke and the sith used to create lightsaber crystal but he get unstable and the lightsaber crystal didn't come and X thought he didn't make it right. later he saw something weird and he get there and he find his lightsaber crystal but later he realize that as long he is in battle he get more and more powerful but when he stop fighting his powers come to normal but was very weak in water (crystal). That was my lightsaber good luck all )
@Flipside-ll6lo
@Flipside-ll6lo Жыл бұрын
I think the ideal lightsaber would be one a regular blade but you have multiple parts on your belt/back so you can customize it on the go. want a lightsaber pike, just equip the staff part. Want to equip a blaster to it like Ezra’s, attach it when you need it Etc.
@justinnelson9787
@justinnelson9787 Жыл бұрын
Crosshair had his chip removed before order 66, he was just loyal to the Republic/Empire
@LoukaMan44
@LoukaMan44 Жыл бұрын
My ideal lightsaber would be: Darth Vader hilt, doubled blade, red and green + inquisitor ring
@The-Blue-Knight
@The-Blue-Knight Жыл бұрын
Nice
@Invaderbob7
@Invaderbob7 Жыл бұрын
My ideal lightsaber is a bow staff with a foot and a half shorter reach than normal to allow room for a blade. The body and help would be made from the same material as vibroblades to prevent cutting from sabers.
@swimmer8585
@swimmer8585 Жыл бұрын
I think even in canon the original ARC troopers and commandos didn't have the chips. But I really don't know for sure
@Marleyjr00X
@Marleyjr00X Жыл бұрын
My ideal saber wouldn't even be a saber. Itd be a pair of gauntlets that projected an actual blade shape. But then also have emitters on the palms to create a standard lightsaber blade. And yet again the ability to create saber claws from the fingers. All of this can be used and activated at will.
@aryas4928
@aryas4928 Жыл бұрын
My ideal lightsaber would be shaped like the force sensitive Wookiee gungi from the clone wars but instead of brylark wood it would be made of metal alloy for some added weight while having a very smooth agile shape for combat. It would have to turn on with a button mechanism but the button would be facing inwards so it could only be activated with the force. I would want my blade to be green to show that the force is what I serve hence the force button. I would also have a smaller shoto bladed lightsaber with a curved hilt made out of beskar steel as this would be kinda of like a backup lightsaber mainly used for combat. The color of this blade would be blue cuz u know guardians with combat.
@trickshotamateurs4139
@trickshotamateurs4139 Жыл бұрын
For my ideal lightsaber, I’m going with an orange blade, with a smooth, wooden hilt(similar to the one the Wookiee Jedi from clone wars had, it would be a curved hilt for advanced fencing, with a one sided emitter. I subscribed
@beni5149
@beni5149 Жыл бұрын
A clone trooper or old Republic stile sabre would be awesome, like something around the theme of kenobis general outfit with the armour, white plastoid with clone trooper colour Accent like the buttons or wires and components being in bright yellow or dark green or blue scheme with a galactic/old Republic flat pummel end and logo on the side, that would be the ideal lightsaber that i would like in my opinion
@jacks_mac9912
@jacks_mac9912 Жыл бұрын
My ideal lightsaber would be shaped like palpatine’s. It would have a cut out window to show the Hurrikane Crystal (like Starkillers), and the Emitter would be like Darth Tyranus’, with a sharp black blade on the end to sometimes k!ll my enemies quietly. And the entirety of the hilt would be made of beskar to prevent any damage or destruction (like what happened to Ezra’s). For the switches, the blade length and power adjuster would be gold and the activation lever black. The purple crystal (Hurrikane Crystal) signifying that I have a deep knowledge of the Dark side, as well as the light. Thanks and hopefully you got to read mine
@MYSTAIEX
@MYSTAIEX Жыл бұрын
Is the giveaway still up?
@VadersFortress2
@VadersFortress2 Жыл бұрын
Nearly finished!
@MYSTAIEX
@MYSTAIEX Жыл бұрын
@@VadersFortress2 Sick man, may the best man win.
@AnotherStarWarsGamer
@AnotherStarWarsGamer Жыл бұрын
(Ideal Lightsaber Contest) hoping to win! My ideal lightsaber would be a curved hilt with a cutlass hand guard on the front of the hilt made entirely of phrik. The color of the hilt would be a light purple, (in memory of my unborn children) a blue blade, (the color of my wife’s eyes), and with a white handle. The kyber crystal’s I would use is a Pontite Crystal and a Ankarres Crystal. The Pontite is known for its calming powers and its subzero burning touch from the blade itself. As described in Star Wars lore, the Pontite crystal was also known to hold the power of turning dark side users back to the light and calming them of their negative emotions. The ankarres crystal is well known for its healing abilities to others and to its wielder , so having a combination of both in my eyes is a very powerful lightsaber for a Jedi. For the blade I would have a dual phase blade in order to hold both crystals and for fighting purposes. As an avid fencer and champion of my club, having the ability of changing my blade length is not only effective but also efficient. Plus having a hand guard is a definite bonus.
@oisin_6990
@oisin_6990 Жыл бұрын
My ideal lightsaber would be a crossguard lightsaber with the 2 smaller blades being able to retract inwards and outwards depending on my circumstance. It would be a similar design to Darth Atrius’s especially with the smaller blade design(liked him from the comics)he was a sith who lived when there were many sith in the galaxy long before the rule of two. I would replace his spiked pommel with a more basic round one similar to Obi Wans. It would be red as I think sith lights bars are way coolest and who doesn’t want to be a sith lord. The switch would be quite standard but with a few extra features I would be able to retract or ignite my blade with a movement of my wrist in a certain motion. The second one of these features being if i hit a button beside the on/off switch I can change my lightsaber into a lightsaber whip which were used in the high republic era by the night sisters I think this would help mid fight to ambush an appointment and be able to lash out and land a strike quickly. The lightsaber would be made using the same materials that Palpatine used phrik, auordium and electrum, these materials are very strong and can withstand heavy blows even from a lightsaber. I would like the colour of the hilt to be matte black and metallic gold. I would like the blade emitter to be dark redish colour, and the hand grips to be similar to Qui Gons as i think they look quite sleek and would fit my grip well.
@earld.a.3878
@earld.a.3878 Жыл бұрын
Well I'm glad I came across this giveaway because I've had a lot of thought on my dream lightsaber and I'm gonna use every excuse to talk about it. Design: So my ideal lightsaber would be a double ended lightsaber with the same proportions on Maul's blade. The idea is it's functional as a sword staff when just one end is turned on and then obviously as a double ended, although I'd make some changes. First of all the saber will separate into two BUT not in the middle of it making two equally sized lightsabers, but instead about 2/3s of the way down the handle producing one saber with a longer handle and one with a shorter handle. The longer saber of the two would be best utilised in fights where power and leverage is desired while the shorter one would be useful for tactical reasons, very close/confined quarters combat and for quick attacks and movements (and also stealth if you could call a lightsaber stealthy). And then of course having the option of two sabers means you can attack and defend at the same time. The hilt of the blade would be coated in Cortosis, the conductive properties of which would cause lightsabers to temporarily short out upon contact. Baiting an opponent into hitting the larger handle part of the staff/weapon would effectively disarm them creating an opening and for a window of time, I could guarantee the upper hand. Crystals: The lager half of the saber would use Dantari Crystals as they allow the user a better focus on recovering spent Force energies, occasionally recycling the fierce, wild energy of combat to the wielder to fuel their Force power. The smaller half of the saber would use Hurrikaine Crystals as when used in lightsabers, they created blades that were very good at penetrating defenses as they better ones reactions and reflexes. Colour: You may have already guessed from my choice of crystal but the blades will both be purple mirroring my connection to both sides of the force, because it looks very pretty, and purple is my colour. The hilt will be jet black with some subtle red detailing along the body in some places in a circuit like design. Thanks for listening to my Ted Talk 😂
@kw91
@kw91 Жыл бұрын
Posting here, as a repeat of a previous comment, for the lightsaber contest: My ideal lightsaber: I always liked the defender hilt from the game Jedi Knight: Jedi Academy. I like the idea of a tapered hilt, since it naturally favors more elegant styled movements, like the Makashi form. I also think a curved hilt like Dooku's helps with that too. Nevertheless, I also want to be able to get some more forceful hits in. So I'd like a tapered hilt saber. It shouldn't be an even taper; one side of the cylinder of the grip should be basically round like a normal saber, and then the other side should taper and become thinner until it hits the pommel. The tapered side would be for my fingers, while the more rounded side would fill my palm a bit more. The pommel on the back would be as wide as if there were no taper, and have a very very slight curve, down toward the taper, to serve as a finger stop for the grip. The emitter would not be curved, but run in alignment with the grip, straight. There be about 2" or so of cylindrical hilt before the emitter itself. The grip would be very slightly longer than 1 hand. When using one-handed, I'd shift my hand back into the stop formed by the tapered grip and the pommel. When using with two hands, I'd be able to place the first fingers of my dominant hand on the short amount of hilt below the emitter, the lower fingers of my dominant hand and the first fingers of my second hand on the tapered grip, and the last fingers of my second hand against the pommel. I'd have a yellow saber blade. I'd like the main color of the hilt to be black, with silver as secondary, and brass colored trim. The entire tapered section should be the black material, with decent texture for grip. The silver should be smoother and cover the rounded side of the grip for smoothness in the palm. It should also make several ridges over the tapered side, kinda like marking out finger groove boundaries.
@theonlyMoancore
@theonlyMoancore Жыл бұрын
I think a better looking color would be orange or white
@kw91
@kw91 Жыл бұрын
@@theonlyMoancore I'm not a big fan of Orange myself, but I like the idea of white. White's symbolism because of the reversal of crystal bleeding is just incredible. But I love yellow as my favorite color, and I love the complicated symbolism of yellow. It's not quite good or bad, though usually good. Rather, the point is that, like Jedi Sentinels, it can both embrace the force and the Jedi order and the Jedi's role, while also moving beyond questions of the force and the Jedi order, and into the broader questions about life. The Force can be found there too, even if neither side wishes to interact with it. More importantly, there was something before there was a light and a dark side that were exclusive; and even the Son and Daughter are not simply reducible to evil and good respectively. Rather, they have a unity that precedes them.
@ElijahBissell
@ElijahBissell Жыл бұрын
My ideal lightsaber would be a War Dragon Rider lightsaber with a Firkraan crystal alongside an Etaan crystal. My lightaber blade would be bright orange with a deep crimson outline to show my compassionate nature while also conveying my willingness to do whatever it takes to protect those I love. While this lightsaber wouldn't improve my force abilities in any way it would give me a major advantage in battle. Every attack dealt or received by my lightsaber would cause the opponent's weapon to fly backwards while also dealing out an electric shock.
@niccomakk
@niccomakk Жыл бұрын
Imagine a detachable double bladed lightsaber designed like Darth Banes Krayt dragonbone design! Give me that please!
@davinbloink9811
@davinbloink9811 Жыл бұрын
My ideal light saber would probably be darth Vader lightsabers based on the design and look and also the the tale on how it was made and how darth Vader got it.
@dex2670
@dex2670 Жыл бұрын
I just simply love Obi-Wan Kenobi so my ideal lightsaber would be his. Especially the one from the Clone Wars maybe with some battle scars too.
@albertmitchell1797
@albertmitchell1797 Жыл бұрын
weatherd Dark side version of Ezra's lightsaber
@cappycook
@cappycook Жыл бұрын
I love your accent...Cheiiiiiiips
@jacoblovelace644
@jacoblovelace644 Жыл бұрын
My ideal lightsaber would be a double bladed and can disconnect, and when disconnect the lightsabers one lightsaber would be a Darth maul lightsaber and the other half would be the dark saber and the blades would look like from either their show or movie
@jeremyroland5602
@jeremyroland5602 Жыл бұрын
Just casually throwing in a *_black clone trooper_* and not explaining that...?
@duncanpalmer4057
@duncanpalmer4057 Жыл бұрын
My ideal lightsaber would have a black hilt and white blade, it would have a split guard similar to Cal Kestis’ and Ahsoka Tano’s. It would also have an exposed kyber crystal, and the bottom would be shaped like Darth Vaders head.
@duncanpalmer4057
@duncanpalmer4057 Жыл бұрын
I also have a duel coming up and don’t have a saber
@jasonbeasy6007
@jasonbeasy6007 Жыл бұрын
my ideal lightsaber is designed like an actual fencing saber that had a bell guard. or if it had to be real would be palatines lightsaber.
@xIChromeIx
@xIChromeIx Жыл бұрын
Order sixty siIIIIIIIIXXXXXX
@LordBals
@LordBals Жыл бұрын
The fulcrum
@Archangels_righthandboi
@Archangels_righthandboi Жыл бұрын
What if you has a utility saber, that shot both blaster bolts and bullets but could transition to a single blade or double blade. Kind what the Chiss did with their firearms but then have the Jedi make a gun that only requires a kyber crystal.
@euankane7928
@euankane7928 Жыл бұрын
I know it’s not a very interesting one but I’ve always liked qui gons saber it is quite basic but I think it really speaks to him as a character focused blunt but thoughtful
@Squelchmeky
@Squelchmeky Жыл бұрын
Lightsaber Giveaway: this may sound weird, but I would have a very short blade. Maybe 20 inches or less. I would do this so that I could do moves and spins that others couldn’t do. For example: I could do a spin in between my torso and arm without cutting my shoulder off. I would have a white blade just because they’re cool and have a nice sound 😌
@freelancenerd4804
@freelancenerd4804 Жыл бұрын
Yes!!!!
@sirmodeus3727
@sirmodeus3727 Жыл бұрын
His chiiiiiiiiiiiipppppppp
@birchwood5889
@birchwood5889 Жыл бұрын
My ideal saber Orange lightsaber tonfa with the tonfa handle able to collapse to make a shoto saber made of durasteel with ornate engravings of different creatures running down it
@jgamez106
@jgamez106 Жыл бұрын
I think dual wielding pata style sabers would be cool. It would have the gauntlets (lightsaber proof/resistant), the saber would emit a inch or so behind the wrist (give you a bit of protection) and like Ezra’s lightsaber you’d be able to shoot stun rounds.
@4khusky780
@4khusky780 Жыл бұрын
Darth revan he’s my fav so I’d want his sabers
@valantissismanidis2003
@valantissismanidis2003 Жыл бұрын
Lightsaber giveaway: Personally I would like a lightsaber like ezras with the lotus (or Duke) hilt, the blaster part could have a similar color with the hilt. The color could be yellow or blue. This lightsaber will be on my right arm (to aim better ). On me left hand I would like a second small lightsaber like ashoka's but with similar colors as my first (without a blaster because I can't aim with my left hand ). I think this would be perfect for the republic areas because it has the gold and the silver. The blaster of the first lightsaber could use the power of the crystal for more damage. I would use the first lightsaber for more heavy attacks because it is my good hand and the second for defending and quick attacks Extra: It could have like a an extra part to transform it to a dual lightsaber and a second part to transform the lil blaster to a sniper like weapon I hope you understand Sorry for my bad English 😅 Good luck to everyone Keep up the good work 👍👍
@Arjun_2205_
@Arjun_2205_ Жыл бұрын
For the republic!!!!!
@easye.2236
@easye.2236 Жыл бұрын
Forgot howzer
@mjay6245
@mjay6245 Жыл бұрын
"Chiiiiiiiihhhhp"
@Knighmare-Gaming
@Knighmare-Gaming Жыл бұрын
Here my entry a gold and white curved hilt with a blade that can change colors and haves a droid hack tool at the bottom of the hilt
@Casso2611
@Casso2611 Жыл бұрын
See I’ve always been a fan of high risk high reward, I’d want a lightsaber that it’s very difficult to master but if done is a very powerful weapon. I’d want a lightsaber that can switch between a traditional lightsaber and a light whip, essentially the whip will tighten and straighten forming a blade. Switching between these modes in combat would be very difficult to master but if you managed it you’d be very hard to predict. You could swing at them with the whip covering long range attacks and then charge towards them confusing them, they’d be prepared ti guard against the whip and would not be ready for an attack from a blade. So yeah that’s my idea, hopefully I can win the lightsaber
@ethanwallace5348
@ethanwallace5348 Жыл бұрын
Dooku saber dooku saber dooku saber
@dead5385
@dead5385 Жыл бұрын
My ideal lightsaber would probably have a handle of wood, Idealy Wookie made, and I also think it should have 4 blades. I know that it sounds weird but if it were on a circular handle with the blades representing a compass I think it would be rather functional in battle. Like an enhanced inquisitor blade. The blade colour would probably be turquoise and I think a krayt crystal would be suitable.I really hope I win the giveaway, I've been trying to save up for my own lightsaber but my family can't afford one right now. 😊
@echo4121
@echo4121 Жыл бұрын
Hi
@Erikthefox21
@Erikthefox21 Жыл бұрын
Corasant crosant
@TheSidewindingCobra
@TheSidewindingCobra Жыл бұрын
My ideal lightsaber is dual bladed with a midnight purple blades that ate curved like a samurai sword with a carbon fiber hilt inlayed with croc teeth and purple heart wood and damascus steel and The American Flag engraved in it and for the grip i would have a Snakeskin and beskar and the abilty to split into two sabers like cal kestis' could do in fallen order and with a lock so i could throw it like anakin/vader and with a lava crystal merged spliced with ghost fire and purple kyber crystal all working together and like cal kestis it would have crytals in each saber half And a switch on each half so they can work indepentently of one another so it would basically be a six phase double bladed split ghost fire purple lava samurai saber
@trooper2737
@trooper2737 Жыл бұрын
My ideal lightsaber is a Praetor type hilt. I would use strength along with my connection with the force in battles by using a cryte dragon pearl. This crystal would not be for the power the crystal holds, but as more of a trophy because I would get the pearl myself to make my blade.. My bade would either purple or white because I would use dark and light, but I would not be a part a jedi or sith. With this being said, I would be more like a grey jedi than anything else. I am the keeper of the flame Soldier of balance Guardian of balance I am a grey Jedi... Even if I don't get picked for the giveaway I just want to say I really enjoy your content and you explaining every aspect of Star Wars. May the force be with you.
@apapz3245
@apapz3245 Жыл бұрын
You’re not a Jedi.
@iam_bot2651
@iam_bot2651 Жыл бұрын
Double bladed Anikin and obi one lightsaber
@Sir_Cactus
@Sir_Cactus Жыл бұрын
As far as I know Master Syfo Dias had nothing to do with the clone army. He died shortly before they were ordered by Darth Tyranus, who was impersonating the former.
@lexnight8345
@lexnight8345 Жыл бұрын
He came out with the ideea and talked with Duku ( his only friend in the order because of the special ability Syfo had to see in future ) and Duku paid for it because was from a very rich familly .
@smiller3995
@smiller3995 Жыл бұрын
Makes sense
@montagmoon2248
@montagmoon2248 Жыл бұрын
I would have a all white hilt the color of the moon, and it would be 7 inches longer for reach advantage. My saber color would probably be white, or red based off my personality
@charlieringstead2375
@charlieringstead2375 Жыл бұрын
The first episode of bad Bach I would have started shooting the other clones
@mox9788
@mox9788 Жыл бұрын
My ideal lightsaber is a green blade with a cracked from battle inside the hilt there’s a small vibroblade should the saber ever fail the hilt is a combination of obi-wans emitter Luke’s second saber middle grip and the bottom grip is anakins
@Saint092
@Saint092 Жыл бұрын
My ideal lightsaber would be mace windu’s lightsaber. I feel like as one of the few main black characters in stars it always gave me someone I could see myself in when I was younger look up to. he is portrayed as powerful, intelligent and has a dark side that that he controls with discipline. #giveaway #myfirstsaber #macewindu
@hamspillagernetwork9192
@hamspillagernetwork9192 Жыл бұрын
As I have commented before, my ideal lightsaber would be a curved splittable dual blade similar to that of Assaj Ventress, something useful for my use of form 2, however it would have a guard made of cortosis to protect my fingers, as they have been hit in duels before. The crystals used would be a Fikraan crystal, as the ionising effect would provide the risk of paralysis due to the shocking power of the blade (pun intended). It would also use a Pontite crystal as the calming aura would allow me to keep a level head during combat. The Pontite blade would be blue to white with a silver core, however I cannot find what colour blade a Fikraan crystal produces, so I will use the force to change the colour of it to crimson with a red core using techniques described in the next paragraph. An interesting concept I discovered was that of how sith of old would create sabers/enchant metal swords with sith alchemy. I came up with the idea of using those techniques to amplify the strength of the sabers, possibly increasing the heat or even giving them a corrupting effect like Exar Kunn's (sorry if it is misspelt) lightsaber. While difficult to achieve, the effect of alchemy on the blade would provide an edge in combat so sharp it could be considered 2D. Further ideas for power amplification would be the idea of funneling the plasma blade from one half of the sabers when connected into the other. This could even be done with further amounts of crystals, utilising dual-phase tech. If that was possible, a Krayt Dragon pearl would be used as they are already powerful, along with a Qixoni crystal, once again due to increased power. In theory, my quad-phase saber would still be contained in the usual 1m magnetic containment field, creating one of the hottest and most powerful blades known to the star wars galaxy, having been strengthened through so many means, possibly making the Pontite crystal necessary to maintain my sanity.
@spectrickx1678
@spectrickx1678 Жыл бұрын
Beep
@ConquerorMindset_
@ConquerorMindset_ Жыл бұрын
Hey I just read the community post from your main channel and my favorite lightsaber from your website is THE RELUCTANT HERO I hope I win Lots of love from 🇮🇳
@greece_rome
@greece_rome Жыл бұрын
My ideal lightsaber would be a thin white katana with je’daii markings making up the blade. It would also contain multiple crystals, as to change from a katana to a 3 stringed whip. The hilt would be light, tactical looking, and easy to handle, being a gold color and having small markings along the hilt. Other crystals give the blade flexibility, making it easier to slice through giant opponents and tough meat. The hilt would also be flat, like a katana’s hilt.
@TheNovead
@TheNovead Жыл бұрын
Why do you talk like thiiiiss
@06mrselfdestruct
@06mrselfdestruct Жыл бұрын
KZfaqrs really need to stop narrating the way they do, it’s annoying
@pikapal8038
@pikapal8038 Жыл бұрын
Hi
The BRUTAL and UNFORGIVABLE Crimes of the JEDI
23:38
Vader's Fortress 2
Рет қаралды 6 М.
Every Clone Trooper That DISOBEYED Order 66 (Canon)
10:44
Red Five
Рет қаралды 36 М.
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,6 МЛН
Final muy inesperado 🥹
00:48
Juan De Dios Pantoja
Рет қаралды 10 МЛН
Watermelon Cat?! 🙀 #cat #cute #kitten
00:56
Stocat
Рет қаралды 25 МЛН
🍟Best French Fries Homemade #cooking #shorts
00:42
BANKII
Рет қаралды 60 МЛН
EVERY CLONE That Disobeyed Order 66 [UPDATED 2020] [CANON]
9:52
StarForceOne
Рет қаралды 150 М.
Who Were The Gray Jedi Orders That Sought TRUE Balance In the Force?
24:40
Vader's Fortress 2
Рет қаралды 29 М.
Every Single Known Commando Squad to Exist in the Clone Wars
20:21
Why Regular Clones HATED Clone Commandos
10:01
Vader's Fortress 2
Рет қаралды 34 М.
What If Darth Maul DEFEATED Palpatine On Mandalore
26:10
Vader's Fortress 2
Рет қаралды 5 М.
This Shape Is IMPOSSIBLE To Draw...
0:57
Stokes Twins
Рет қаралды 46 МЛН
Зу-зу Күлпәш.Түс (16 бөлім)
40:42
ASTANATV Movie
Рет қаралды 813 М.
Kitten Party After Exhausted Mother Cat Meltdown #funny #catlover #cuteanimals #cartoon
0:32
Спас девушку от местного бандита | #shorts
0:59
diaansssss.filmss
Рет қаралды 4,9 МЛН
Попил😂инст: sarkison7
0:45
SARKISONCHIK.OFFICIAL
Рет қаралды 6 МЛН