Everything To Know On Picking The Perfect BMX Handlebar For You!

Рет қаралды 37,365

Күн бұрын

In today's Tech Video, Ethan Corriere (@ethancorriere) gives you, Everything To Know On Picking The Perfect BMX Handlebar For You! From size, material, 2 piece vs 3 piece, to the geometry and measurements you need to know about to make the best choice! Also, visit fitbikeco.com or epic-bmx-online.myshopify.com/ to pick up some of Sleeper (Ethan) Bars!
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
If you'd like to support me:
For merch visit: www.AlfredoMancuso.com
onlyfans.com/alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Snapchat: AlfredoMancuso

Пікірлер: 126

@RLOsbornBMXFreestyle 2 жыл бұрын

I have always loved the Kneesaver bars, those are my go to. Definitely an oldschool look

@allansevilla6385 2 жыл бұрын

Thanks for this vlog Alf it's really good for us to know more about the parts of a bmx specially for a newbie like me.

@steve6187 2 жыл бұрын

ethan was on point, without all the hecticness from phu lol

@BSS22193 4 ай бұрын

Great video with good explanation 👍 I like the looks of the 4pc bars so i'm going to change my 2pc to 4pc on my BMX bike from 2005 that i'm about to fix this spring so i can use it again this summer. I've had this BMX bike since it was new in 2005 so i'm really looking forward to use it again and maybe learn to do some trics on it

@VailSkateSupply1 2 жыл бұрын

I just got the sleeper frame in red too. My daughter loves the spaghetti. Ethan I’d a great rider I like to support guys like him. 👍👍😊

@AlfredoMancuso 2 жыл бұрын

🙌🏻🙌🏻🙌🏻

@lancerturner79 2 жыл бұрын

Great job filling in mate!! Who makes those cruiser bars? The ones you called funky.

@garthreid7114 2 жыл бұрын

I've got a blue tooth jam speaker clamped perfectly with 3 ties to the top cross bar, radical cool and FUKIN' spot on. Not interested in doing, 'tricks' just enjoy music on the go. And I've got 3 mountain bikes all with BMX bars....comfort✌️

@pauljames4510 2 жыл бұрын

I’m Loving my Shadow Vultus SG bars in 11” rise helps me loads I’m 6 foot 4” they stop me getting bad back 🔥👍🚲💨

@sirpepperoni 2 жыл бұрын

About time Ethan was in a video..good video bro! his like the west coast Panza! Can you ask him why he decided to go without a wishbone rear end on his frame? And can you also tell us why some aftermarket frames like the older Sundays used to basically pump out their completes without a wishbone rear and why their aftermarket frames had one?

@Fausto_4841 2 жыл бұрын

i'm looking for the T1 barcode bars. large. they made another run around like 2010 or something but the ones from like 2002 were the best. i've got mine but they're a little bent, would really like a new pair.

@EvanSmith4211 2 жыл бұрын

What about bar height, and width related to rider size/style?

@jonasmeier417 3 ай бұрын

BMX parts have cool & great looks! What is the highest height of BMX handlebars? Which grips are best?

@chasshefchik802 2 жыл бұрын

My Sleeper Sig frame is coming in tomorrow. Got to represent

@DirtDigglerDetecting 2 жыл бұрын

I've been riding my FITBIKECO series one 21 tt Transgold 2019 i think. Trimmed the bars ( Thanks to ALF) and grease the bottom bracket a few times now. 6ft 220 pounds Jumping 6ft Gaps. NOT a problem. Best Bike i have ever Owned. NOw i want that Complete SLEEPER :) DROOL :P hahahha Great Video Alf Thank you. You Rock

@AlfredoMancuso 2 жыл бұрын

Sounds like a beaut!!

@onecrazywheel Жыл бұрын

5:00 we used to call those knee saver bars "Flatland" or "Flatlander" bars. You'd see all of the guys doing flatland in the 90's using bars like this. GT used to put these on a lot of their BMX bikes back in the day.

@kenwinsor1914 2 жыл бұрын

S&M bars are the only one's I use and I buy them for the wall, my kind of skakeboard wall candy, but BARS of all kinds 😋😋😋😋😋 Where's your shop? Thx and AWESOME job on the video 💯%

@Adapting_Adventures 8 ай бұрын

I use bmx bars on my mtn bike. I have extreme short arms. I was curious about either a 4 or 5 piece bar so i can have the 8"-9" bar rise but have a narrow cross bar so my brake levers have more space so I can 1 finger brake instead of having to use 3 fingers to brake.

@jacobabourdeau2944 2 жыл бұрын

Why the different height of bars and how will help with certain tricks or dirt jumping? Thx

@draleigh8881 2 жыл бұрын

ethan did a great job actually lol

@AlfredoMancuso 2 жыл бұрын

💯💯💯

@tonysheene6399 2 жыл бұрын

Just got my sleeper bars in black from epic store cheers man they are cool 😎

@AlfredoMancuso 2 жыл бұрын

🔥💜

@michaelduran7862 2 жыл бұрын

I had a pair of 3 piece bars in the 90's they came on a 20" giant. they cracked in 3 places on the 4 piece looking side

@VailSkateSupply1 2 жыл бұрын

Yes, I have the chrome ones, they were $129 but so worth it.

@AlfredoMancuso 2 жыл бұрын

😅😅

@littleandre4957 2 жыл бұрын

(01:42) I agree. It's literally scary to me because I've snapped four piece bars before and I FEEL like no matter what the quality of the steel/iron is it will still snap at the bottom. But I could be wrong - please correct me if I'm wrong..

@SaltedSeeder 2 жыл бұрын

CW is my fav, but I’m old as dirt lol cool vid 👊🏼

@owen687 2 жыл бұрын

These videos really rolling out

@AlfredoMancuso 2 жыл бұрын

Trying to streamline them haha

@Croccolucho 2 жыл бұрын

4pc bars are a bit less resistant than 2pc, If you think of it, the points of soldering are more, that means the bar would be more fragile where that especific point is because of the heat applied.

@beetlejuice4693 2 жыл бұрын

Who remembers Elf blast bars 6pcs

@spuds94bravo 2 жыл бұрын

Yup Elf blast bars and 2pc bars which I run on my bikes.

@blasperezjr6080 2 жыл бұрын

Hi, by any chance do you have any Bama handlebars available at your shop or do you know where can I look for them?

@AbundanceRun Жыл бұрын

Very helpful Video

@AngelHernandez-lv7xy Жыл бұрын

I have a question so I have a GT pro series 29 I have stock handlebars right now which are GT Pro Series Cheat Code 2pc, 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 11° Back I want some thing a little taller do you have recommendations

@joeyripswell Жыл бұрын

good job guys ty

@Younghead 2 жыл бұрын

It’s all about the Haro Knee saver bars, listen to RL Osborn he’ll steer you right. P.S. get well PHU.😎

@cfmechanic 2 жыл бұрын

Dope vid hope phu didn't come down with the vid. Prayers sent. Is that a lip/spoiler on the counter top 🤔 😳

@frankcarrion1011 2 жыл бұрын

Ethan needs his own channel! phu needs his own channel! max needs his own channel! you guys are all star’s !!!!! Keep the content coming al pray 🙏 for phu

@AlfredoMancuso 2 жыл бұрын

💜💜💜

@treeratkomolwejakul 2 жыл бұрын

I currently runs animal empire 2 pcs bar for a year now. Its awesome.

@AlfredoMancuso 2 жыл бұрын

Hellya

@lukasstipp_bmx 2 жыл бұрын

Ethan should do these more often. Maybe he does one every other Tuesday

@Softballcrazy 2 жыл бұрын

Do a video on Dirt Jumpers: parts, realtionship/similarities to bmx, wheels, hubs. TheRise is doing rad vids on dirtjumpers.

@Antgomlvill 2 жыл бұрын

thanks for repping the shirt!!

@VailSkateSupply1 2 жыл бұрын

I have the perfect 10’s. Love ‘em!

@Rileys_dad 2 жыл бұрын

I had eight piece bars in 1998, they were full chro-mo, and a bit oversized I think.

@GigaDonk 2 жыл бұрын

I think those last ones are called low rise bars and are used allot in fsfg and those big ass wheelie bikes.

@jhonangeles8747 2 жыл бұрын

Here in my country i see a bar cost bout $13 = ₱650 but i still can't afford it... It is a 10rise bars im a 5'8 tall my stem is a front load, is it a good setup?

@michealspriesterbach864 2 жыл бұрын

Need more celebrity guest specials with Ethan!!

@sirpepperoni 2 жыл бұрын

Yeah Alfredo! 😄 Would be sick to see even short clips just of the pros that come in, talking about theirs parts

@jddavid9064 6 ай бұрын

Can you make a vid with phu on how to find the geometry stats of parts you dont know the brand or anything about the part trynna run the same geometry n im not trynna buy sum n not fuk wit it im also a 4 piece kind of guy so yea help porfavor

@dave_drags 2 жыл бұрын

Ayeee the griminals shirt

@BigTree412 2 жыл бұрын

Definitely like Ethan better just saying He’s awesome

@jakjohn672 2 жыл бұрын

Requesting a game of bike w a sub Rosa rail outside of epic between Ethan and denim

@lucianonotarfrancesco4443 Жыл бұрын

Bars with a front load stem vs taller bars with a top load stem with more rise will fell the same? Would that make sense to save weight? I’m assuming top load and front load stems weight about the same, while taller bars weight more than shorter bars…

@lucianonotarfrancesco4443 Жыл бұрын

Of course I mean taller bars with front load stem vs shorter bars with top load stem, for some reason KZfaq doesn’t let me edit my comments on safari on iPad, maybe it’s my ad blocker or popup blocker..

@cymonjames7651 3 ай бұрын

I have a oversize sit post

@mattaguirre7123 2 жыл бұрын

Ethan is Awesome!!

@littleandre4957 2 жыл бұрын

I like Ethan (and Phoe equally) too. 🙂

@beetlejuice4693 2 жыл бұрын

Who remembers Boss 5pcs bars

@masterofnone1481 2 жыл бұрын

I need bars that allow me to land bars 👌👌👌 I’ll be waiting to Zelle the dollar amount directly 🤣🤣🤣

@trippymctripster2405 2 жыл бұрын

Got some. There fire. I'd put them on a pit bike. Solid.

@AlfredoMancuso 2 жыл бұрын

Hellya

@jasonmorris4795 2 жыл бұрын

Was like an Ethan infomercial

@AlfredoMancuso 2 жыл бұрын

😂💯

@macb6305 2 жыл бұрын

If you ride a 4 piece do you have to know how to play with a Kendama?

@jdm91hatch 2 жыл бұрын

S&M merica! Baby! 🤘

@skylarsoper241 2 жыл бұрын

8 pcs diamond back bars

@AlfredoMancuso 2 жыл бұрын

Hahaha that’s wild

@hernesto4347 2 жыл бұрын

I first like the video. Then i watch

@Thegameheroz 2 жыл бұрын

Denimcox is the best man 😊

@tonysheene6399 2 жыл бұрын

Hey can you send sleeper bars to uk?

@AlfredoMancuso 2 жыл бұрын

Sure can!

@Taino-Photos 2 жыл бұрын

Still have my 90s Hoffman love handlebars somewhere and I think there 8 piece, and those 3 piece handlebars I think we're made by giant bikes

@doodooheadfart 2 жыл бұрын

Would you be willing to selling them for my Hoffman Taj build?

@Taino-Photos 2 жыл бұрын

@@doodooheadfart not for sale, actually going to do a condor build and need them for that build

@SFletcherson 2 жыл бұрын

One spec not really mentioned anymore for bars is Crossbar width...meaning from one side of the crossbar to the other side. The closer you ride with your hands on the bends...the more it's noticeable. I don't like anything over 11', but nowadays a lot of bars have a wider bend radius meaning the box (middle) will be larger. So if you're like me and ride on the bends and the bars feel off like they still feel a bit too large, it's prob gonna be the crossbar width is too much. A lot of riders ride with their hands more out from the bends, so they really won't feel it. Also, sorry but Ethan was incorrect in that those Mission parts aren't because they are 4130 tubing, BUT aren't heat-treated at all.

@Fausto_4841 2 жыл бұрын

i could be wrong but i see more 4 piece riders who use that kind of grip

@SFletcherson 2 жыл бұрын

@@Fausto_4841 that does not matter.

@Fausto_4841 2 жыл бұрын

@@SFletcherson i know it doesn't. i'm just saying what i've seen. maybe there's some popular 4pc bars that are built for that geometry and that why a lot of them run them, not just bc theyre 4pc.

@zosterinski 2 жыл бұрын

lower crossbar *should* give more flex also

@SickTruck 8 ай бұрын

I love 8 piece bars.

@621ELECTRONICS 2 жыл бұрын

I have always loved 4 piece and knee saver, but I’m in the eastern time zone area 😀. At the end of the day, run what works for you.

@4AMFISHING 2 жыл бұрын

Sleeper bars are the perfect handle bars

@AlfredoMancuso 2 жыл бұрын

They do feel pretty great

@cfmechanic 2 жыл бұрын

Bro where is the next vid 😩. Hope all is well

@carlosmatthews6652 10 ай бұрын

Kneesavers all day!!

@jaden3393 2 жыл бұрын

Ethan has a very cool shirt on.

@AlfredoMancuso 2 жыл бұрын

🤪

@hollywoodplumbkra8zysrt 2 жыл бұрын

Elf 6pc bar

@InstlPrints Жыл бұрын

The crankflip God himself

@ClassicDannyboy 2 жыл бұрын

2 piece :)

@Grenade825 2 жыл бұрын

If he would just make a damn 11 inch sleeper bar I'd agree there the best but I gotta ride s&m for now.

@bimmix2054 2 жыл бұрын

Yo Ethan was on point. Could you get Denim to do a video? Wait I think he has a channel... keep all these fools in the make P.S. get well soon Vooster!

@Thegameheroz 2 жыл бұрын

Yeah definitely denimcox is the best

@jakjohn672 2 жыл бұрын

Nice request denim n Ethan n Alf r the men we wana see phu dope too

@PropagndaX 2 жыл бұрын

YO DIS ETHAN

@AlfredoMancuso 2 жыл бұрын

It really is!

@thebarak 2 жыл бұрын

Perhaps glass is not the best countertop material in there!

@johnmartin2079 2 жыл бұрын

I thought there was only one kind of bars for real BMX and they are called V.bars. did you ever see stu, ride anything else?

@littleandre4957 2 жыл бұрын

(01:27) me too. 🙂

@BMXBikerDude3 2 жыл бұрын

❤️🧡💛💚💙

@nickbigg84 11 ай бұрын

4pc is a lot stiffer

@shgsr71 2 жыл бұрын

Kneesavers

@Oliver1072 Жыл бұрын

Ethan is a HUNK 😂😂

@zackeryyy 2 жыл бұрын

f animal for not selling the presidential bars anymore.

@AlfredoMancuso 2 жыл бұрын

Yo truuu

@BMXBikerDude3 2 жыл бұрын

Yo 🌈🌈🌈🌈 Dudes… What Up & How’s It Going, Mates ??? ??? ??? Yo Check Out The 6 Piece “Elf Cruiser Blast” Bars……… Let Me Know, Your Personal Thoughts On This, ASAP…