all stolen parts break but will never get stolen 😂

I know Haro isnt at the top anymore. but i just got their Baseline 2 piece bars, full chromoly for only $35. you cant go wrong with that.

I'm looking for Fiend Team bars. It's light and I think it's strong enough.

My S&M Perfect 10's I've had since they first came out, Still havent bent or cracked and they've seen alot of abuse. I want to say I've had them over a decade, I just know I got them when they first dropped and never changed bars, they just work.

If weight is a big concern or point that you based the ratings on I would consider hitting up a shop with a scale and actually weigh them instead of relying on the advertised weight. Almost every brand is off by a substantial amount on the weight of all their parts from tires to frames and everything in between with a few exceptions that we found in our shop on boredom days. we found 3 brands if I recall that most of their products advertised weight was accurate or even very close too. some bars for example that should have been 2.1lbs were actually 2.65lbs and some even higher. frames advertised as 5lbs - 5.2lbs that were 5.5lbs and up, tires that are half a pound heavier than advertised, etc... I'll call out one brand even though I like their products and ride them personally but weigh a set of BSD acid v2 or jonesin forks and then look at the advertised weight. You will learn why your front end feels so much heavier than it should.

10" Kink Hulk bar has entered chat.

no s and m?!

S&M Fu bars fo life! I love my 10 inch fu bars. The tubing is a lil thicker. They flex less so there isnt as mutch rebound on hard landings. My wrists like that. Also taller bars are good for lower back 🤘

u can add to your bars width heres how u gather all the 19mm crank spacers u can find ull only need 2 or 3 prlly per side ,,, slide them over your odi bar ends thro some electiv tape over it an slide it in ,, i ran bars ends like this for years 😂

Can you make one for 4 piece bars please

Is there any reason the Fiend Reynolds signature/ team bars was not on the list? From my research they seem to be one of the lightest, they’re butted and heat treated and are already the width most like to cut them down too.

I rode a 9.5 bars with a topload stem, and yes it felt great but it seems I can't hop that high and finding feeble hard 180's a bit more challenging, so I switched from topload to frontload to make my bars lower. from that I feels good to do hops and stuff.. bought a 9.25 bars and felt better...

I think taller bars make it so that you can't pull up the front tire as high off the ground as you can with shorter bars. I'm 6' tall and I like 9" to 9.25" max.

S&M Perfect 10 bars for me i like to sit up when i ride but im old so......

What do you think about the eclat Morrow bars? Searching for 10" bars that don't weight more than my frame.

Kink has multiple bars models. They are the same geometry, except size, so if u don’t like 9’5 option u can buy different model

Not having snm is wild

I run the bsd alvx 9.5 inch bar . Bsd never dissapoint me

I realize the standard strip bars are never in stock but, no s&m and no standard bars, the term "top" and "best" used very loosely here

6 feet tall and ride a 7.8 bar with frontload and 35mm offset fork. I see brands sometimes make low bars and thats so good, but unfortunately its so hard to get brand new bar under 8.5. You are lucky.

best bars ever made 1.animal bob scerbo bars 2.the make crew bars 3.GT classic four piece 4.skapegoat bob scerbo bars

Opinion on BSD Safari bars?

Odsy broc 9.8 😊

what about Cult Crew Bars?

The pop pop sound effect is way too loud.

i got the sweet tooth bars frm dans last summer they sent me used bars as new 😮😢 cancel dans comp