I was smiling and nodding my head the whole time, like I knew what any of that technical stuff you explained meant lol :)
@mikebird8290 Жыл бұрын
THANKYOU John for everything you do for this GREAT HOBBY of ours. You truly are the electronics GURU 🇬🇧🇺🇲🕊️✌🏼🤙🏼
@archaeopteryx63203 жыл бұрын
just had my left leg amputated above the knee so im recovering but still trying to stay up to date. Keep up the great work John.
@BhutJolokias3 жыл бұрын
I've already run my kit version on 3S in a super shafty rig with 1800kv Revolver. After a 1300 Mah battery (about an hour) the esc was no more than ambient temperature. Good job John. And yes, it's silent.
@MrLunithy3 жыл бұрын
As a HobbyWing addict I'd be more than happy with this very impressed and reminds me of the step up STM32's were from 8 bit for quad rotors.
@fatfreddiescat99523 жыл бұрын
What a shocker, sold out (kit ver.) Much like everything else. Just a thought maybe stock up probably first so us mere mortals might on the other end of the world can get a chance to try some of these cool products?
@HolmesHobbies3 жыл бұрын
We are stocking up, but high pace sales on key products are making it difficult to keep it all "in stock" all the time
@fatfreddiescat99523 жыл бұрын
@@HolmesHobbies yes all very true, but for some people its a case of narrowing down what options are out there. It’s great to plug some new tech, but if the tech isn’t there, eyes will look elsewhere for alternatives. I see you now have a uk distributor and that is great, I hope they’ll shall be able to expand on the range they currently have. Till then I’ll keep my eyes out for these allusive shiny tech goodies.
@zaxpage90033 жыл бұрын
It makes me chuckle every time you blow the rest of the rc market out of the water. Congrats.
@indybama803 жыл бұрын
Yall work wonders john! Always upping the crawling game. Keep up the great work!
@ryankadota17013 жыл бұрын
Just got mine yesterday! Can't wait to put it my Element Gatekeeper build! Gonna team it up with your Team Spec revolver!! So much goodness coming up from you, I love it!!👍
@ryankadota17013 жыл бұрын
@Akoni Ikeda I haven't had any issues with temps, The Esc does get warm on really hot days, so i rigged a small fan that i plug in the receiver. My Element weighs in around 4.5 lbs w/out wheels. I can say that its a KILLER set up for sure!! Motor barely gets warm as well!! You would not be dissappointed!!
@ryankadota17013 жыл бұрын
@Akoni Ikeda I have, but you can only run a 1400kv motor with it, and gear up with a 19t or 20t pinion. I run a 14t pinon on 3s 1500mah battery's on my Team Spec and have plenty of wheel speed, and get about 2 hours run time.
@ryankadota17013 жыл бұрын
@Akoni Ikeda Solid choice, You wont be disappointed!! Enjoy!!
@gibsonlife573 Жыл бұрын
This seems to be like revolutionary
@CuciWaterjet3 жыл бұрын
Mother of all escs. Absolutely top notch buddy!!
@brickbros-m41a2 жыл бұрын
That thing is sick
@Tylerharrell643 жыл бұрын
Looks like a perfect setup for the crawler between the fj and the jeep by your right shoulder.
@robertdale74533 жыл бұрын
Got mine running the 2500 10p and its great just as smooth as a brushed but damn the power that the outrunners have is amazing.
@roberth53703 жыл бұрын
How can u tell the motor is 10 pole or 14?
@nlhpr113 жыл бұрын
Awesome, I got two minis when first announcement. Got them on my mini rock crawlers 🤙🏻
@Brian_Mowry__BMOW713 жыл бұрын
Love the looks of it! I missed the first round of orders. Can't wait for them to come back in stock so I can order 1, 2 or 3 of them!
@baxrok2.3 жыл бұрын
Congrats on the release. Thanks!
@brianbrigg573 жыл бұрын
Another winner. I'll bet the availability of this ESC makes your Revolvers harder to find.
@lstvphoto3 жыл бұрын
Just ordered one! Thanks John!
@davidbanaszak5623 жыл бұрын
I want one... too bad my revolver is in my trx 4 I am gonna have to wait for the rtr version.
@dasgoofinhiemer50393 жыл бұрын
looking forward one that will be recommended for heavier 2spd trucks.
@ggwbrc3 жыл бұрын
Thanks for the video Very informative🤩
@nathanstewart20182 жыл бұрын
Just bought one of your 2700kv trailmaster sensored brushless motors. Would this be a good match for it? It will be going into a Phoenix portal.
@HBFTimmahh2 жыл бұрын
Bought a CM mini v2 kit from RPP a week back. Got it installed with the 2200kv Revolver. Had to wait for my servos to try overall, but tested out and it was nice and SILENT, which is huge for me. As a bassist and sound engineer, that whine keeps me wincing as I reach for the 18k slider that isn't there. lol Thanks for making a quality item that is acceptable for us audiophiles and old cranky bastards. lol When I got my servos and installed them, I was getting huge glitching. and was a bit perplexed. After a day or two of prodding and poking around, thinking it was a problem in the duel bypass I soldered up, I decided to try another rx, and BAM. All was well in the world. Working perfectly other than it gets pretty warm when I'm doing a slow roll. I see the new firmware available and will be putting that in as soon as the programmer I ordered from Dlux Fab arrives. Heard a few say that solves the heat issue. Hope they're right, I love this combo and have only ran it on my floor for a minute at most.
@06madmartin3 жыл бұрын
"Ghost ride the whip!"
@jjvizms3 жыл бұрын
I WANT!!!!!!
@jerroldtaylor30472 жыл бұрын
Dam gots to get me one for the ax10
@weedfaya959 Жыл бұрын
A quand un esc programmable ? Comment peut on gérer la coupure lipo ? Merci pour tout 👍
@Djkommode2 жыл бұрын
Interesting I wonder if I can tune my freewheeling programming on my hobbyking. I like the low speed rpm wheel speed lock and release at higher wheel speed on this mini.
@Gear_head11 Жыл бұрын
Any idea when the v2's will be back in stock?
@user-fj3qb9tl7d Жыл бұрын
I have the Holmes Hobbies dual-BR mini esc for my MoA, running two puller motors. Do I need to remove the red wire from one of the connectors going into the receiver ? shame there is no connection diagram with the kit.
@JoeOvercoat3 жыл бұрын
Slow & silent is nice.
@tomijorg Жыл бұрын
How will it work on a 13T motor in a trail truck, with 7-10 hour hikes?
@mrstanton813 жыл бұрын
Grats!
@blowback88522 жыл бұрын
When will you restock this esc?
@markvasseur9613 жыл бұрын
Need me a couple of them there units
@lennythedog65443 жыл бұрын
Nice!
@forrestcrabbe2 жыл бұрын
🤘🍻🤘
@1sickgsx3 жыл бұрын
Waiting on the RTR as my soldering skills are level LOL
@desertbadgerrc33603 жыл бұрын
Does this mean you are going to be making a good simple way to give the SCX24 more power?
@eddytoy94963 жыл бұрын
I would compare it to something like an 80 pound flywheel in a jeep in low range in the rocks then the throttle modulation is normal after you get above 10% throttle.
@Jrod_FPV3 жыл бұрын
does it have onboard temperature sensor ? If not, i'm guessing that has current monitoring ? Could it potentially be programmed to limit it's own current draw and therefore automatically limit it's power and prevent itself from overheating? That would be super cool. This thing looks awesome!
@HolmesHobbies3 жыл бұрын
Both!
@sashax912 жыл бұрын
ESC looks to be amazing. I would like to use it for my lightweight build soonish. But in my area there is a lot of sand, so I'm afraid outrunner motor will die quite soon. It there some lightweight closed can motor you could recommend to use with the CrawlMaster Mini Brushless ESC? Won't there be cogging with PULLER PRO - STUBBY - 2700KV?
@ryancoke92 жыл бұрын
Looking at the esc I’m assuming it’s not waterproof?!?!? Will there be a waterproof model down the road if this one isn’t?
@johnyarnall58822 жыл бұрын
When will the BR mini dual be back in stock?
@mattnauck29353 жыл бұрын
I've been thinking about doing this on my 8.5 pound trx4 with 2 speed. Is this a good idea? If not could you please recommend something instead?
@azzkikin13 жыл бұрын
How about a wire diagram? The videos are great, but downloadable documents are nice
@lstvphoto3 жыл бұрын
Do you have a link to the video for installation of the RTR version?
@ka41723 жыл бұрын
Does it always work with sensorless inrunners (1700 KV) so smooth? My 1000kv outrunner doesent work under water constantly ha ha.
@ericbaker20303 жыл бұрын
Would you recommend this ESC for one of your Revolver 540 SS Team Spec motors?
@bigm14223 жыл бұрын
I have a question I am looking for an ESC for a shafty crawler like the RC4WD Bully 2 with MOA axes, That means I need two ESC and two motors which combo would be suitable for it?
@ed0c2 жыл бұрын
would this work well on scx10v3 with the 2gear setup? i am going to be using 3s and a crawl master sport 550 12t.
@stompindakka32223 жыл бұрын
so i just turned my trx4 into a single speed would it be okay on 3s running a 3500kv puller pro? or would that be to much for this esc?
@HolmesHobbies3 жыл бұрын
Too fast for this small esc. 1800 or 2200 imo
@x3thelast3 жыл бұрын
Super dope. Looking forward on getting mine paired with the SS REVOLVER 🤘
@only1jman2 жыл бұрын
When will they be back in stock
@paulschryer95713 жыл бұрын
🤔(WHEN CHOOSING A MOTOR) !!!! ....AND SOME GMADE THOUGHTS.... As long as the new GMADE (GS02F) gears & drivetrain (with overdrive) holds-up to the general use & abuse of my driving style, I think maybe a Revolver might be a great way to take advantage of the (GS02F)'s "gear-slack" that exists in the 2-speed tranny !! 🤔.......cuz with the forward direction [OR] reversing dir. of the gear-slack, or gear catch-up.... I would call it, is where John's REVOLVER MOTOR (might be) a great fit due to the gearing difference, cuz of the (tranny-based overdrive) in 1st gear. So the slow turning of the REVOLVER MOTOR(S), could help "slowly take-up the slack" in the Gmade drivetrain !! ?? (When going from (for. to rev.) OR vice versa). That gear - DIFFERENCE, is 14.29% O.D. (stock)....which takes place while in 1st gear, so the "gear catch-up" (when going in REVERSE) can be a little too much, and I can see how this could potentially be a tranny gear meshing issue, (IF) I were to be hard on my driving operation, from forward to reverse, ✳️BUT more caution WILL BE NEEDED when going from (reverse direction to forward !!!!)✳️ I REALLY THINK EVERY OWNER OF THIS NEWEST GMADE, (THE GS02F) NEEDS TO KNOW THE BENEFITS OF HAVING THIS AWESOME ONE-OFF RC DRIVETRAIN BY GMADE....BUT - MOST IMPORTANTLY, OWNERS & POTENTIAL BUYERS NEED TO KNOW THAT THIS SWEET CRAWLER RIG (IS NOT) TRAXXAS TRX4 TOUGH !!!! - When it comes to a comparison of drivetrain(s)
@WandersonRC33 жыл бұрын
Would the CM mini RTR require a bec ?
@halredden35093 жыл бұрын
Sounds like a fantastic ESC for a Capra, im very interested in getting an outrunner for my capra which would you suggest wity this ESC?
@grassfpv18763 жыл бұрын
I got the 2500kv 10p and with the capras gearing, it was getting hot and shutting down. John told me to run the 1800kv revolver, so I got a 1800kv revolver and building it now
@HolmesHobbies3 жыл бұрын
1800 or lower
@emilgabl90692 жыл бұрын
Is this ESC coming back into stock or is it discontinued?
@GearDownCrawlerz2 жыл бұрын
John ,,with the firmware update. is it possible to do 4cell now on a teamspec motor
@HolmesHobbies2 жыл бұрын
Yessir
@GearDownCrawlerz2 жыл бұрын
@@HolmesHobbies i finally got it. I shouted u out in my youtube...i can tell u this.. not all micro cables work..
@jdsrcs80613 жыл бұрын
Man this is pretty cool set up. How would you say it compares to HW 2 in 1 fusion? Thanks Mr H!!!!
@SDOTProductionz3 жыл бұрын
It compares but is very limited
@HolmesHobbies3 жыл бұрын
In terms of driving feels, as smooth with a 14 or 10 pole.
@dadsrcworkbench13223 жыл бұрын
John, so my 1800kv Devolver on 3s should be fine from the looks of it on this fine piece of kit?
@HolmesHobbies3 жыл бұрын
Yep
@dadsrcworkbench13223 жыл бұрын
@@HolmesHobbies I figured as much but just checking. I didn’t want to see the magic smoke.
@1110kevinho3 жыл бұрын
May I have question here? When I turned on the transmitter, then connected the ESC power with battery and touched the throttle a little bit to startup, the motor was moving automatically and pushing the car backward continuously. Do you know why? I didn’t mean to pull or push the throttle but the motor was turning by default? Seems I need to adjust the trim(+50) to stop the default setting! Is that normal for the mini ESC? Thanks in advance!
@HolmesHobbies3 жыл бұрын
Needing some neutral trim is normal. About 60 clicks on my radio
@braddahdussifyoumuss5963 жыл бұрын
So I just got the vfd trans and was let down when I tried to fit my hw fusion in and it didn’t fit 😢, I’m trying to go for a light weight c1 rig and was thinking of purchasing one of these escs, just wanted to know what would be a good motor to go with this esc and would fit my trans thanks Jhon 🤙🏽
@HolmesHobbies3 жыл бұрын
I'd use a 1800 revolver and this esc for comp use. Or a micro X and Puller Pro 2200 stubby
@HolmesHobbies3 жыл бұрын
Or 16t magnum and br mini. For comp I still tend to use brushed.
@braddahdussifyoumuss5963 жыл бұрын
@@HolmesHobbies thanks Jhon! Can I ask why you would use brushed for comp?
@microrcobsessionsmrco49513 жыл бұрын
Would you say this is a better option for the scx24 than the castle sidewinder micro 2 esc on a 1400kv or 2300kv outrunner brushless motor?
@HolmesHobbies3 жыл бұрын
Yes, I would choose it with a castle external bec
@microrcobsessionsmrco49513 жыл бұрын
@@HolmesHobbies Awesome thanks for the quick response. I will be sure to get one along with the castle bec for my next scx24 project! Love your products!!
@derrickhorner16403 жыл бұрын
Do I need to wait for the software update to run this esc with the 2700kv Six shooter ? Thank you in advance
@SDOTProductionz3 жыл бұрын
Thats alot of kv for this board as it is now
@SDOTProductionz3 жыл бұрын
But I think u can run it on 3S without issues
@HolmesHobbies3 жыл бұрын
No, it works well on 3s with the 6 shooter. That's what I did all 6 slot prototyping with
@moe2823 жыл бұрын
Still no manual or information? I can't even figure out how to calibrate mine, tried everything including reversing channels and all.
@HolmesHobbies3 жыл бұрын
There is no calibration. If it doesn't arm then change the radio to 50/50 throttle or add 60 clicks of trim
@keithmosier40513 жыл бұрын
@@HolmesHobbies Thanks for the reply. Am on 50/50 throttle but still nothing. Oddly it works on channel 1 using steering wheel just fine; will try 60 clicks of trim next; I had done 50 but perhaps I didn't go far enough.
@HolmesHobbies3 жыл бұрын
Try trim in the other direction if it doesn't work in one. Sometimes you can just grab throttle a few times and it will arm, then you can tune neutral trim till it stops moving
@keithmosier40513 жыл бұрын
Had the zero trim issue - Discovered throttle at 120% F/R was the issue; once set to 100% F/R and than 60 clicks of trim it engaged perfectly with zero neutral trimming required. Would still prefer the hold throttle on power up to set endpoints on future versions; but now that I've got this nailed down I can work with it. Results were shocking on my two existing revolver V1/V2's. Beyond impressed.
@moe2823 жыл бұрын
All resolved on Flysky now with 100% F/R throttle and 60 clicks of trim. Thanks!
@RCVOODOO3 жыл бұрын
Would this be usable in the scx24?
@HolmesHobbies3 жыл бұрын
Yes
@RCVOODOO3 жыл бұрын
@@HolmesHobbies would need motor change or ?
@HolmesHobbies3 жыл бұрын
Yes, the esc isn't programmable for brushed yet.
@RCVOODOO3 жыл бұрын
@@HolmesHobbies motor suggestion for the scx24 to run with the mini?
@sammygonzalez76273 жыл бұрын
The only negative point with your web page is that almost everything is always sold out...makes it a bit frustrating 😠
@HolmesHobbies3 жыл бұрын
looking for something in particular? Chip shortage has made ESCs hard to get but we have backstock of stuff and are filling the site as fast as possible .
@jamiesavery19733 жыл бұрын
I'm in the UK and can't find a single one to buy ??
@SDOTProductionz3 жыл бұрын
Can't find a single one in the US either lol 🙃
@corydehaan83493 жыл бұрын
Yeah I was hoping that with this video there was another batch that came out, but nope. I swear I check daily.
@SDOTProductionz3 жыл бұрын
I am waiting for the release of the bigger version.... thats gonna be the game changer ESC right there
@HolmesHobbies3 жыл бұрын
Red winches will have them.
@rc-ingaroundamerica87923 жыл бұрын
I can't ever seem to find them when their in stock, lmao I want one for my sherpa, on a 2500kv 10p motor, hahahahahahahahaha
@shaynejenkins4462 жыл бұрын
it was already sold out at this point and hasn't returned. is it even real?
@lowslowcrawlers13043 жыл бұрын
Only Homes would upload this when it's out of stock. Sometimes he is too smart
@HolmesHobbies3 жыл бұрын
Timing the shooting and editing with stocking rhythms is quite hard!
@zechariah32342 жыл бұрын
Takes esc for drone, increases the price. lOoK wHaT i DiD!
@HolmesHobbies2 жыл бұрын
nevermind that weve been making slim/ flat ESCs for crawlers longer than the drone market has been around, or that the crawlmaster hardware is 100% new engineering and not just a flashed wraith32 like other companies are selling (for higher prices than the crawlmaster, ahem).
@BIGDOGED123 жыл бұрын
When the plug and play version, along side being 100% tunable comes out....you will be able to retire to the mountains, and your kids kids kids live in luxury.