Everything You Need To Know About your Apollo LCD Settings (Tutorial)

Рет қаралды 383,557

5 жыл бұрын

Tyler walks you through an easy to follow guide on how to use your Apollo Scooter LCD screen and settings.
If there is anything we forgot to cover, leave a comment below.
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
As always, if you have any questions or concerns, get in touch with us via email or phone.
E. contactus@revrides.com
P. 360-888-7433
Stay in the loop:
Instagram: www. REVrides_official
Facebook: www.Facebook.com/REVrides

Пікірлер: 650

@mariusgmail670 4 жыл бұрын

Zero 10x LCD settings P1: lcd brightness P2: miles/kilometers P3: voltage (depends on scooter) P4: hibernation timer P5: P6: wheel diameter P7: number of magnets on the motor (don’t change) P8: limitation on power P9: kick or zero start P10: P11: electronic breaking 1-5 P12: soft or high acceleration 1-5 P13: P14: P15: cut of voltage (don’t change) P16: zeroing the km counter P17: cruise control (on=001) P18: P19: P20:

@norwegianvikinggamer3049 4 жыл бұрын

Thanks a LOT for the information. It helped me a LOT💯💯💯

@Melissa05121992 4 жыл бұрын

Thanks for the info 😊

@kennorips 4 жыл бұрын

I can't get the accelerator to go, what settings do I use

@merivale1977 4 жыл бұрын

Hi, difference from A and d if you press red button for 2 sec?then p15 voltage setting of mine is 39!it s ok?zero 8 41v 10Ah, thank you!!

@ElFalkoo 4 жыл бұрын

Is the settings same on 8x?

@musiconair 3 жыл бұрын

I was hoping I’d find this tutorial, cheers man 👍🛴

@vorrepetrykanov6313 3 жыл бұрын

Champion - thank you - i nearly had the scooter run away from me today and wanted kick to start on - you gave me the info that the manual didnt.

@anthonyyoung7721 2 жыл бұрын

My man! This is exactly what I was searching for. Clearly explained and easy to follow. Just set mine up as u recommended. Legend! Cheers!

@vancouverelectricvehicleas8942 Жыл бұрын

That’s what I wanted too, really appreciate that detailed information, explained very nicely !

@juuon1760 4 жыл бұрын

Thank you so much, can’t wait to get one 👍

@osmanaweismaike4028 4 жыл бұрын

Thanks you guys for your helpful information about sitting it’s helpful 👍

@lexxzus 3 жыл бұрын

Thank you for the outstanding job you did in this tutorial.

@ricardomedeiros3080 4 жыл бұрын

Thanks, man!........I really needed that video......I just bought a Zero 10 and was already trying to figure out all the panel control settings

@andrewlifka6019 2 жыл бұрын

Finally I found a video explaining this. I probably have everything screwed up right now

@victororo462 3 жыл бұрын

Thanks, Bruh! I love my scooter! And you just made it a lot funner!

@MA-bq8yg 3 жыл бұрын

Thanks for the tutorial. Very clear 👍

@chrisk853 2 жыл бұрын

You’d think that a scoot would come with instructions. Dude you are awesome!

@nelsonp8365 5 жыл бұрын

Thanks dude very informative 😃

@kimochino9047 2 жыл бұрын

Just bought a Zero 9 and Im glad I saw this video. This wasn’t included in the instructions manual.

@alessandrosuppini943 4 жыл бұрын

Thank you guys, very useful info in this video 👍

@lucasfrost8093 3 жыл бұрын

Just bought an M4 , great help man thank you , really needed that 👍

@Tyson133__ 3 жыл бұрын

how fast

@user-de6cn1oi1b Ай бұрын

best tutorial so far ...Thank you☻

@stealtherider3008 3 жыл бұрын

Thanks for this info!! Cool video!

@djscandela Жыл бұрын

Thanks, I have the Plug City scooter with same menu. Must be same unit under different name. Great details !

@Rico100Daily 3 жыл бұрын

Love the video Rev Rides 👏

@jeffh664 4 жыл бұрын

Excellent! Thanks Tyler

@cancant9547 3 жыл бұрын

Thank god for this video🙌🏼

@aliasgharnoori9000 3 жыл бұрын

Thanks man I’m getting one soon 👊🏼

@codykirkland9002 2 жыл бұрын

Great video! Thank you!

@JeremiahRamirez347 Жыл бұрын

Thank you so much for this very helpful

@F1_gaming_1 29 күн бұрын

Bro love u u made my scooter work I did the kick start to 1 it wasn’t working and I got scared love u😭😭🥰🥰😘😘😘😘😘

@davidniyi2483 Жыл бұрын

Thanks man very helpful. Unlike the instructions

@poiderh 3 жыл бұрын

Thanks for this, very useful.

@RevRides360 3 жыл бұрын

Glad it was helpful!

@LiviuDragon 4 жыл бұрын

very useful tutorial

@faycal2748 3 жыл бұрын

Good evening, how to remove security please because I have to go with it to work thank you for responding quickly.

@sparrowhawk5673 2 жыл бұрын

Thank you so much for the video my problem is that despite changing it every time. WhebI turn off my scooter it just keeps resetting to its original settings how do I make it permanent?

@shawnwalker9861 3 жыл бұрын

Good video...thanks!

@Bell_the_Cat 4 жыл бұрын

Excellent tutorial and explanation. Just been trying to figure out settings and the tiny manual that comes with the unit is useless. This is precisely what I needed. Cheers!

@Buzzhumma 4 жыл бұрын

Hi there , how long before an app like the xaiomi 365 has ? It tells so much useful info even individual parallel cell voltage . a xaiomi bms could be piggybacked and then many of the app functions will work.

@Avinashg07 4 жыл бұрын

Thanks for the useful video, brother.. 👍👏🤩

@RevRides360 4 жыл бұрын

No problem, thanks for watching!

@foreverloco6840 3 жыл бұрын

@@RevRides360 what do I do when there is an error and I can’t accelerate forwards everything else is working but when I see the LCD screen it shows a weird error

@ziairandoost9225 2 жыл бұрын

Thank you so much.👍✔✔

@manuelroman6817 Жыл бұрын

Thanks sr very helpful

@user-bb3xr5yh5m 2 жыл бұрын

Ty ty ty ty ty 🙏 more helpful than the retailer that sold it to me

@CoasterRob Жыл бұрын

Thanks very much if you wanted to change the speed setting what would it be for 25km/hr or 15.5mph

@HorneyOne 3 жыл бұрын

Once again, LEGEND

@RevRides360 3 жыл бұрын

Thanks Stephen. Appreciate it!

@rajan-ma4546 2 жыл бұрын

@@RevRides360 how go Bluetooth

@greekos1 2 жыл бұрын

Hi I’ve the Kugoo kirin G1 2000W, has the same display panel. I’ve followed the same kind of settings you’ve demonstrated and I’m sure it’s exactly the same as your model. Please let me know if mine has different settings to your model. Mine is 52V Has 3 speed settings 10inch wheels I would like to know what is the recommended minimum air pressure to max for the tyres The disc breaks Squeek a bit.

@pwr6706 Жыл бұрын

my man, this was exactly what I was looking for but in my scooter I have a bluetooth icon and I have no idea how to enable it the scooter's model is the winner sky k5 explorer 3k watt

@stitgibekili 2 жыл бұрын

Savior!!

@dwjrn 2 жыл бұрын

Hi, I’m trying to decide which scooter to buy. I like the Fiebor QO6. But it’s a kick to start. That’s a deal breaker. Do you know if I’ll be able to change that in P settings? Ty

@davidcate8115 Жыл бұрын

Hi Tyler, I changed my front tube on my Zero10x and refitted as per your video. Now the hydraulic front brakes are not working. I get a read warning sign top right on the LCD next to the gears. Any ideas how to fix this?

@Low-effort-individual Жыл бұрын

Cheers been wondering how to turn cruise control off it gets a bit sketchy at higher speeds

@alvinloydgasacao7369 3 жыл бұрын

Thank youuu soooomuchhh

@panchoman25 3 жыл бұрын

THe voltage setting. I bought a used 10x that has the voltage set to 48. Does that make a difference? What is the diff between 48-52

@nitheal95 Жыл бұрын

Thank you so much man I got my girlfriends scotter going so much fast it went from 19km to 32km thank you so much

@Ryan-ju5wk 2 жыл бұрын

Great info.....does this go for the blue jx-168 model

@ynb_ten1891 2 жыл бұрын

Thanks man

@carmyp77 2 жыл бұрын

hello .. I have the FH100 model which is practically the same, maybe yours has some more functions. Have you tried to hold down only the MODE button? A blue spotlight appears on mine, do you know what it is for? thanks bye

@timothybeebe6382 2 жыл бұрын

Great video thank you for the instruction

@tonywitte2672 2 жыл бұрын

Have you installed these Controllers on other brand scooters? just curious? I have a hover-1 Dynamo that my kids use. The LCD display broke just a week after using it. Scooter fell over and display was smashed. Wondering if this would be a replacement option in your opinion? Amazon- LH-100

@gadh98 3 ай бұрын

hi tnx for the guide. when i in the settings menu (p-settings) , and i long press the power button, the "A" in the bottom line changes to "D". do you know what is the purpose of this mode A/D ?

@spacefightertzz 3 жыл бұрын

I have kugoo m4 pro and it uses tf-100 display/throttle. Some of these parameters are the same. But some are different. I was hoping to get more electro braking but can't figure it out. It has p2=km, p3=48, p4=10, p6=10.0, p7=30, p9=0, p15=100, p16=0, p99=99, d0=558

@mikea5319 4 жыл бұрын

I have a joyorscooter that won’t move at all after playing with these settings. Is there a way to reset it to factory? The scooter turns on and everything but literally won’t move. Model of throttle is js-168

@markadriansalvador6595 2 жыл бұрын

Can you teach me how to install ignition key with volt meter please.

@markadriansalvador6595 2 жыл бұрын

Hi sir,can i install ignition key with volt meter,because my throttle is the same on your scooter.

@TotalRookie_LV 11 ай бұрын

Wait, so does P08 allow to save battery and increase range (sacrificing aceleration, of course) by limiting how much power can be drawn or is it something else?

@janelleburek6751 3 жыл бұрын

I just received my Zero 9 and after I rode it for the the first time an error message on my display screen. How can I go about fixing that? Or do I have to contact you to fix this issue?

@mikshooter2536 4 жыл бұрын

hello , asking sir is it possible to change the lcd for minimotor lcd ? thank u...

@taytenore Жыл бұрын

Thanks for this information. May I ask if you can show how to properly lock the Evercrosss scooter H5. If you chose to not attach the seat. Also do the wheels need to be filled with air? Or are they solid plastic?

@RevRides360 Жыл бұрын

Thanks for reaching out to REV Rides! Feel free to send us an email at Service@REVRides.com for further assistance. Cheers!

@clarencelacht 3 жыл бұрын

Thanks for this video. For the Zero 9, is it possible to turn off the blue LED lights when turning on the regular lights?

@RevRides360 3 жыл бұрын

At this time there is no option to disable the blue LEDs while the headlights are on.

@hadowman6847 4 жыл бұрын

Nice, how could you make it waterproof ?

@TheEdmaster87 2 жыл бұрын

Hello, can someone find out which percentage of P08 gives what km/h at gear 1,2 and 3

@josephlabarbera7373 3 жыл бұрын

I have a mototech thor 60v 2400w scooter and someone messed with the P settings and im trying to get the right settings! Could you help me ? Please

@djmcjuneski8796 Жыл бұрын

need to know evercross h5 electric scooter any tips on changing speed..Great tutorial

@RevRides360 Жыл бұрын

Thanks for reaching out to REV Rides! Feel free to reach out to Service@REVRides.com for further assistance.

@psychodelo Ай бұрын

is there a setting for battery percentage? I have a scooter with the same Indicator panel, I run about 25km still the battery indicator is still full charge, but then suddenly it wont start and i quess its low bat. is there a way to calibrate the battery bar or percentage?

@spagget 3 жыл бұрын

hi, i changed the p9 to kickstart but whenever i restart the controller (power off and on) it defaults to power start

@MaeRiGee 4 жыл бұрын

I don't have P8 power level. But the P15 is 100. By any chance the power level is P15? Then again i don't have Cut off voltage. Kindly advise.

@elitelaptoppcrepairsltd1149 2 жыл бұрын

the display for battery is only showing 2 bars but battery is fully charged can you help please any ideas thanks ?

@videoafoto 3 жыл бұрын

Hello everyone. I need advice. I have Display LH-100 on scooter FLJ K6. I don't know how to reset the ODO meter to P16. I hold down the MOD for more than 5sec. Nothing resets. I disconnect the hard reset connector. Nothing resets. The ODO meter had 8km on the display after unpacking the scooter.

@jerrysagun9538 2 жыл бұрын

Good morning just asking my zero 9 get slower while I'm on it riding for free wheel 50 km what can I do

@707ridah Жыл бұрын

Thank u

@vitgud3687 Жыл бұрын

Hello i have my techlife x7s scooter and batery when was new i was going around 50 km.. Now i see how is drain faster now i can go only 40 km... I done on it 3700km..... So my battery gonna be more bad till it die or i will gona have only 10 km range at end?

@YouTubeCommentator. 2 жыл бұрын

Do you know what is wrong if the p-12 setting does not work? On my zero 8 there is no difference between 1-5 acceleration

@vicentefabian2975 4 жыл бұрын

Just bought mober s10. After driving for about 100 meters, motor stopped. E-003 error is indicated in lcd display. Pls help. Thanks

@miticabesleaga1695 2 жыл бұрын

on a scooter with 60V 27A batteries, how good it is to set the number of magnets

@dons.7381 Жыл бұрын

Tried. these setting on a iENYRID M4PRO S+ and it does not work on every setting. Unless I did something wrong. Thanks

@Ridger1970 Жыл бұрын

Hey Tyler, I just bought a Evercross H5 Scooter, I am a fairly large man, 250lbs. I can only get this thing up to 12 MPH. Is there anything I can do to increase the speed. I have heard nothing but good things about this scooter but so fair I am disappointed. Thanks for anything you could recommend!

@bernarddevine7334 Жыл бұрын

Unfortunately I crashed and now its playing up. Just wondering if there is any way of reseting the controller.

@TheEdmaster87 2 жыл бұрын

How do I limit the speed to lets say 20km/h regardless of power output. Which program is that?

@GameXSpotz 2 жыл бұрын

I have a question please how do u reset one of them?? as i have a error code

@aaronland2320 11 ай бұрын

Does this video only pertain to yoo or ur brand of scooter?? Just bought an EVERCROSS H5. And only have like maybe 6 P-settings

@michaeltenorio1686 2 жыл бұрын

Hi what will happen if I change the number of magnets from 28 to 30,thanks

@garygaccione983 2 жыл бұрын

How do u get rid of red triangle warning light my scooter won't run

@d.rascals4941 3 жыл бұрын

P-Settings are all the same on all brands as long it's QS-S4?..My eks brand is DOUBLE D VA400 also QS-S4 throttle.

@acantura Жыл бұрын

Hi Rev Rides. ¿These settings must be change in 3rd gear?

@electric_things_ 3 жыл бұрын

Thank you good video.. been trying to get it change to mph surprised my 12 setting was only at 3 gotta to see if theirs a difference😂

@electric_things_ 3 жыл бұрын

Would the o/11x be the opposite way for the faster speed up? Feel like my number 1 setting goes faster then 5!

@beckyhaire9704 2 жыл бұрын

Can anyone help i had a mess around with my lcd settings not when i pull the throttle theres no power i get a warning ligh when i turn it off and i get EA code too how can i fix this

@iZilly Жыл бұрын

So how do i set a complete Max speed on my Zero 10X to a complete Max of 30 kmph no matter what gear I’m in?! I’m tired of having to manually keep the speed down with police around

@Planetugm 2 жыл бұрын

Great tutorial bro. How do I turn the flashing side leds off please?

@drakeninmer4772 2 жыл бұрын

I'd like to know how to turn them off and on

@RevRides360 2 жыл бұрын

Hold the mode button for 3-5sec

@bahawimohammad3793 10 ай бұрын

Hello thanks from your information I followed you but happen something zero 10x when I riding it go automatic pleas tell me how can settle that thanks a lot

@RevRides360 6 ай бұрын

Feel free to go to the website and click contact us and send us details