Thank you.

Indeed it is :) but I suspect it only works due to the impulses of the primary L2 coil

I'm glad someone pointed this out, this is a critical function in the operation of the extra coil, this was also part of how Tesla reached over 100 million volts: "With such a coil I found that there was practically no limit to the tension available, and it is by its means that I discovered the most important of all facts arrived at in the course of my investigation in these fields." I also asked Wardenclyffe Research about this and he said the same thing, with a little extra: "The secondary is within the magnetic field of the primary, therefore energy gets transferred from the primary to the secondary, which is what you want. But what happens next is that the energy gets transferred back to the primary. In other words the energy oscillates between back and forth between the two coils. Tesla wanted to avoid this back and forth, and for that reason (among others) he came up with this extra coil. BTW. it is not 100% outside of the magnetic field of the secondary. There is a (very) small coupling in most of his set-ups. For that reason the extra coil should be wound in the opposite direction." Keeping the extra outside the EM field also isolates it from being weighed down by the primary, Tesla found the best configuration was making the coupling between the primary and secondary coils as tight as possible, this gets you the best of both worlds of tight coupling and free oscillations in the extra coil. I'm surprised Ivo hasn't noticed this, keeping it tightly coupled will weigh down the coil horribly. I wonder what changes we would see if we made the power coming into the primary coil purely Dielectric via a hairpin configuration with the magnetic contaminants removed? Like FIG 5 in Tesla's Rare Notes.

Is it really still a theory once proven though? 🤔

thanks, let us know the results

thanks, yes I ignored the auto cue a lot. feels good to speak from the heart

new video on dielectric induction producing ground currents: kzfaq.info/get/bejne/och4d6uaprfWoqc.html

thanks Sam

thank you!

Indeed amazing it is

thanks I like it too

My pleasure

I think so too

thanks Robert

I will be very clear about how it works, once I get it working. Getting closer step by step. high dV/dt is key

thanks

thanks, continuing the work

thanks

I am now using the extra coil as low inductance/low reactance capacitor plate

@@MasterIvo very nice. i have a device set up with three bifilar coils a magnet and a very secret power supply soon to change the world. i too love to create for those who love life. ♾️🙏🏼

I'm not strickly replicating Tesla, Im doing my own research, inspired by him. He pumped the ground, that is mighty interesting, as with a diode we should be able to pump out of the ground into a capacitor

thanks, yes L2 primary and L3 secondary are equal weight. Maybe L4 should be included in weight ratio. 2: thay might be possible

@@MasterIvo have u observed the propogation of sound in a speaker the electron flow description is abts the same a push and pull the amplitude of magnetic flux ie forwards and backwords ie push and pull 3 dimensional determines the charge movement if it can be can done ie charges brought in by caps ie pos and neg at two different ends at then combined at the load will determine the amount of power or electricity rather current whatever u want 2 call it, copper produces positive charge like aluminium or graphite or graphene and take a neg part using zinc etc and then perform at the same same weight then demonstrate a generator which can sepearted the charges as it speeds up, electrostatic charge seperation is what determines and voltage its amplitude and how much it can be rotated or cps 20cps 3 phase or higher frequencies will also using the same principle give equal current doesn't have to 50 or 60 cps, so try seperating magnetic neg from pos then spin it using a resonant circuit of 2 different materials that can work as earth and pos ie graphene or copper the thing abt copper is it is determined by mass so 1 kg u can get max 100watts no more so use these tit bits and develop once developed transformers will converse the power or acts as resonators to propogate the power or repeaters voltage nd current can be alternated according 2 needs, generator must concentrate on generation of pos charges basically either copper or some other better material in cu it can b done by magnetism thr must b other ways u must logically utilize

Thanks :)

Exactly what I was going to say! Glad I was reading all other comments first. One more detail is to double check that the probes are connected correctly, we have seen many times little 'errors' leading to wrong experiment results.

@@deslomeslager I did think of the probe being in the wrong orientation but Ivo surly must of check that. Nevertheless he should confirm he did or provide probe connection in his diagram to confirm all is good.

I would say easier to convert resistor temp and input wattage into joules, and then calculate its COP to get better idea

Thanks, the resistance is only to indicate power. I have thought about comparing the resistance by giving it an equal 18W DC, but it still would be a rough indicator in my opinion. Best would be to rectify L4 into dc (capacitor bank) and then resistive load it. DC power is much more honest in my opinion.

if the current probe is wrong, than it is 180 degrees out of phase, which would mean, negative power, which is generation of power. Current will still be max at the same time voltage will be max. (max power)

jlcpcb.com is where I ordered mine

Just incredible really

not that easy to calculate, I will use dc power on the output to calculate

@@yarashalam no

thanks for your honesty ✨🙏🏽✨

Dank je Jurgen

thanks for the advice. Whatdo you think made it work?

new video on dielectric induction producing ground currents: kzfaq.info/get/bejne/och4d6uaprfWoqc.html

sure

indeed it is

yes there are formulas and yes you could calculate the power inside the coil. But indeed, the trick is to get it out. in theory you should be able to get 50% out (else the oscilation dies) by matching the load impedance to the secondary (or extra coil or both) impedance

@@MasterIvo are you leaning toward water-heating as a likely test worth running? thinking of what's on hand here, i might google if there's any merit to burning a lightbulb & measuring voltage from a pv solar cell? maybe a dead end but they're definitely very sensitive to brightness/luminosity 🤷 also, note to self: do homework re: whether there's an easy way to rectify L4 & charge a lithium ion battery or series of the same

Power will be measured as DC, that's most reliable. So HF HV AC rectified into dc capacitor bank, which then is loaded. Current is measured through the load and voltage drop over the load

@@MasterIvo coo! i may see if i can use a couple MUR8100EG's and maybe rectify/regulate into some of my spare li-ion 18650 cells... lately been curious yet hesitant about it; seems a "cool" thing to try, yet also maybe a "less-than-useful" application, so perhaps.... ever try charging ur lead-acid 12V's from resonant coil? dunno if that's even a useful thing to try hehe. i wonder if a solar charge controller could be useful for batteries, another thing to chew on 🍰

No not yet

new video on dielectric induction producing ground currents: kzfaq.info/get/bejne/och4d6uaprfWoqc.html

needs to be tuned, 8nF worked for me. wima fkp1 2000V dc

no I haven't, but have thought about something similar. I think the impulse is needed to do something else, amplification of the secondary current

In the 1996 Carson and dollard presentation they highlighted a mystery of the transformer in the secondary. Conventional thinking only looks at flux lines being sucked up in the core at the primary. But clearly more than that is going on there. Additionally there is an instantaneous longitudinal in the ether at both primary and secondary. If its not the flux in the secondary transmitting power it must be the longitudinal thats producing this power instantaneously on the other end. Furthermore the form of that longitudinal is a particular format or geometry arising from how its being created. I am thinking if the secondary core isnt doing anything directly to make power whats its real purpose? Maybe the secondary simply acts as a receiver transmitter component that can interact with the ether wave by virtue of its role it takes in forming the geometry. like a lock and key the transformer has a specific density pattern replicated in the primary and secondary. (The transformer might be seen as a multidimensional converter : a lower density structure in our material octave of a pattern able to manipulate the ether, at much higher octaves. ) The coils as analogs of eachother resonate the longitudinal. but the participation of coil current, coil pattern, and longitudinal as a complex pattern is replicated exactly at the output side except when altered by different winding numbers. What do you think?

Very interesting. I like the octaves. Maybe, the longitudinal is dependent on the cavity between the primary and secondary. I find it a challenge to get these abstract themes into practical usage.

the ether exists at a higher octave, the transformer at our lower material octave. But when the transformer interacts w a current, a longitudinal is set up. it instantly appears, an instantaneous bridge between primary and secondary. I think of the transformer like a switch or valve from how it can pattern the sound in the ether, like a cymatic pattern at a higher octave. And this pattern is a specific structure that can behave as a portal for power. We see it that way disappearing and reappearing, but the transformer actually has two valves. The first valve patterns a sound in the ether and makes it disappear to our observation, the secondary valve interacts with that pattern to reappear because it is similar to the first geometrical form that rang it into being. If this is close to what is happening it may offer a new insight as to how to apply geometry to unlock power.

I think he would love to play with Mosfets and diodes. But he was so clever. He used dc saturated transformer coils as diodes, and auto oscilating relays as switches.

@@MasterIvo I don't think we will ever know all his equipment,, he did things way ahead of his time, we have leaned some of the technology, but I do wonder how we could tune massive equipment he had so well, and he was pioneering not following. It's incredible.

indeed, he was a true wizard. A merlin.

@@MasterIvo so the electromagnetic right hand rule won't let the electricity go back in a coil, makes seance when you say it. Just never thought about it.

yes if a 1:1 transformer has enough dc on the primary to saturate the core, the secondary will only pass one polarity current.

made a post, tested resistance with dc power. with equal power as the input I used in the test, the resistance quicly became hotter. Also tried rectifying to dc, but this detuned it.

yes, but Impulsing is much more interesting

I see you did not find me on Telegram, is there another way we can connect?

yes. latest video shows. but now the final task is to convert the radiant energy into power.

which squarewaves Radiant energy?

Hi IVO; Seems Radiant energy is squarewaves. The purple squarewaves. (?)Squarewaves seem to be cut off negative feedback spikes, from Counterspace? From on and off of (?) Voltage/current? Been awhile.

@@MasterIvo ; Isn't L4 like a spark gap, a voltage drop?

no, the square wave shows when the mosfet (switch) is on/off during turn off, L1 coil produces the negative voltage impulse, from the conversion of it's built up magnetic field. No L4 is not a spark gap, it has more voltage due to less capacity

unknown yet. I need to tune it properly before that becomes interesting. and for proper power measurement I want to rectify to DC, which needs a circuit adjustment

:)

That was the start of my research in 2016

thanks, maar ik volg je niet helemaal. in de L4 extra coil is er geen lead or lag. current en voltage zijn IN phase!

@@MasterIvo awesome results indeed! Ik ga eens kijken of ik een tastbaar filmpje kan maken waarin ik het uitleg wat ik bedoel. Anyway ik ben weer begonnen flats te maken dus wellicht binnekort iets leuks te posten!

thanks. KZfaq is falling apart

The magnetic field is to be amplified by the impulses, I didn't even tune for that. this still needs to be done. then the power (product of voltage and current) will rise

how do you tune for the magnetic field?

using equal copper mass in primary and secondary. and the magnetic field is also tuned by resonamt frequency, which is controlled by changing capacity (capacity provides the current to create a magnetic field in the coil). further more I can give the secondary more windings then the primary. More windings, more inductance, more magnetic field (if current is provided by the cap). but most importantly. the impulses in primary (l2) amplify the current (magnetic field) in l3(secondary)

don't forget the L4 voltage rides on top of the L3 voltage (series connected). The resistance heating up is just an indicator of power. Power is best calculated DC, So I'll first rectify into dc then into a capacitor bank, and then I can resisive load it, and calculate DC power. But to do this safely I need to remove the dc offset on L3 first.

yes in phase current and voltage, but no power. how can that be? it is because the current is not magnetic conventional current. but cold (dielectric displacement) current

@@MasterIvo If one searches Google for cold electric current, I'm still puzzled what to do with it ? AI answer....Is electric current hot or cold? A moth frying on a bug lamp proves, suicidally, that an electrical current generates heat. But a current can also cool, if it runs through the right stuff. Electrons carry away heat when they rattle through exotic semiconductors known as thermoelectric materials--but good ones are hard to find. So the 4th coil

@@oliverwesener584 haha google. this subject is still very cencored. when cold current is mixed with hot current (magnetic conventional conduction current) it produces real power. but they need to be 180 degrees out of phase. It's not an easy experiment to show and explain, non the less I am working on this and intend to present it

@@MasterIvo Thanks for experimenting towards sizing the effective power output. Perhaps a small electric DC Motorpump could run doing X work sizing water (volume) pumped in so much time into a higher container, that can be compared with normal Hot electricity work output to come to a COP. I think output here has a prevailing Hot current because the resistor on it would not heat up to 70°C if cold current would be equal or greater.

I am going to convert the cold current into hot current using a capacitor, to fast charge from the cold current, and then slowly discharge in to a parallel (resonant) coil @@oliverwesener584

So you mean, not one impulse per cycle, but multiple cycles per impulse? And the resonant body? do you mean ferrite?

@@MasterIvo I'm sorry, my English, if electronically, so you say is correct, I try to work with the core for that, I have a resonant ceramic toroidal core and another aluminum core, and they remain resonating for about a minute and a half approximately, the aluminum It is radiant but when the energy flow is in high frequency, it reverses and becomes magnetic, I use ceramic because it is neutral, a neutral core, above this toroidal core I use the tesla pankekes, it is the same winding, it generates standing waves, They are known as poe vortex coil, I can send you images to your email, if you want, and the models to assemble the cores, are simple and will work more than the pankeke, I say it with respect for what you do

@@MasterIvo That the body of the coil resonates is fundamental, beyond the magnetic and electric shock that is being given to it to respond, the body will respond to the vibration and while that is clearer and more neutral, the better, that is why I do not see a resonant body In the pancake coils with resin, I see it as a music instrument that has a person who knows how to play it and who has rhythm, but the body of the instrument is not there, the cable would be the strings, and the resin would act as a resonant body. I don't see that good

I prefer air coils, without ferrite. as ferrite introduces hysteresis loop. which prevents a proper impulse, as the magnetic field energy stays partly stored in the ferrite. All the resonant energy of is present in the Aether and electrigen fields. so that is my body, but indeed then the resin would be the body

@@MasterIvo If I understand that, I don't like the ferrite for the core that too, and if your body is the resin of the coil, I see it there little resonant to that resin, the intention is to leave the core tuned in the background energy, That's why I use an aluminum core, but between one coil and another there is 10cm of air, I could send you one of these so you can try it if you want

Yes! it first appeared in Nikola Tesla's Colorado springs notes, and later in his magnifying transmitter patent

Excellent, this show's the design continuity of WAAS Scepter are Accurate..... DJED PILLAR.. SMART INTELLIGENCE.

1: 18W 2&3: I don't know (yet)

yes, I am setting up shop, but it takes time.

@@MasterIvo please keep us posted

I'll do my best

Santa Cruz?

power=power, reactive or "real" if it works, it works

@@MasterIvo 100% reactive means you don't consume anything. If you don't consume anything and produce something it's interesting. On the contrary, if you consume real power and produce reactive power only it means you have the maximum dispersion of energy, which is still working but for nothing. It's still power, one is useless the other is useful. Take a look at the BiTT transformer, if it works as Thane Heins says then there's a free meal to eat. I already made a replica of his accelerating under load generator, so I suppose there's more to come. Btw some people think he stole ideas from Tesla.

@@StefanDanov thanks for explaining.

@@MasterIvo you're welcome, I still have to learn a lot, so keep up the good work!

it's a mystery

@@MasterIvo sweet, we love those. need van + cartoon doggie. i'll consider it "violent crosstalk" or maybe "rabid parasitics and/or stray capacitance/inductance" though that's a bit harsh

Scooby-Doo :D

use a pc then you can use subtitles in any language

just playing with nature's rules

you need one less i in the adress mstrivo@

thank you and sorry for my mistake. I will send it within couple of days

maybe use some punctuation so it is more readable? pretty long question otherwise

Thanks John!