Ewaste Circuit Board Identification

Ewaste Circuit Board Identification - Peripheral Boards

Рет қаралды 3,982

Жыл бұрын

In this video Shark Scrapper discusses how to identify peripheral boards and determine if they are high or low grade peripheral.
A big shout out to Chris at BOARDSORT.COM for his technical assistance and content quality control in the making of the video.
Help us adopt more sharks AND support Ukrainian relief efforts through any of the following:
Become a patron at: www.patreon.com/sharkscrapper...
Donate directly at: paypal.me/sharkscrapper
Send a check to the address in our ABOUT page
Thank you
In response to viewer requests I've opened some shops so you can get Shark Scrapper Merch, purchase items we find and get the tools we use:
Follow this link to get your Stripmeister now: www.stripmeister.com/?sld=sha...
Shark Scrapper's Amazon Store: www.amazon.com/shop/sharkscra...
As an Amazon Associate I earn from qualifying purchases
Link to torx bits I use: amzn.to/3t4w1fx
Shark Scrapper Merch: spreadshirt.com/shop/shark+sc...
Shark Scrapper eBay store for items found:
www.ebay.com/str/sharkscrapper
Here's the shark we adopted Ali'i Kai:
sharkresearch.rsmas.miami.edu...
Camera(s): GoPro HERO 9 and 10 Black
Software: Camtasia and Snagit by TechSmith, CANVA
Tribal Shark Scrapper logo with mask by our friend from New Zealand: Erewhon

Пікірлер: 72

@sharkscrapper Жыл бұрын

If you want to refresh your understanding of low and mid-grade boards follow this link: kzfaq.info/get/bejne/r7KVoc5nm9Gmj40.html

@williammickle9077 5 ай бұрын

Thanks bud! These 2 helped me immensely!

@sharkscrapper 5 ай бұрын

You're welcome. Happy I was of assistance.

@strakill 4 ай бұрын

This video was a HUGE help. I've got boards from all sorts of things and I was wondering how to grade them. This simple breakdown was exactly what I needed. Thank you and I think Board Sort is going to thank you for helping me not send them "soup".

@sharkscrapper 4 ай бұрын

Great to hear and glad I was able to help you.

@joedavis9155 Жыл бұрын

Thank you for bringing my anxiety level down! I stress out about so many things.

@sharkscrapper Жыл бұрын

Happy to help Joe. We all have plenty we can stress over, circuit boards should NOT be one of them.

@urbanprospector3007 Жыл бұрын

I have to say, you make it a little easier for all of us with these types of videos. Great job of instructing. Gives everyone a point of reference when questions arise. Thanks for everything you do for the scrapping community.

@sharkscrapper Жыл бұрын

My pleasure, thank you.

@boardsort Жыл бұрын

21:00 I once had a customer toss a $10 Dunkin card in to his box of scrap because he thought he did such a poor job sorting. Turns out he did a fine job and I paid him for the scrap and for the coffee. Lol!

@sharkscrapper Жыл бұрын

🤣 now why haven’t I thought of that 😂

@cuscrapping Жыл бұрын

THIS is the video I have been waiting for. You explain things so very well!!! Going to the top of my Informational playlist for future (and often) reference. Thank you Professor Shark!! 🦈 Now I got a bunch of boards to re-evaluate!! 😂

@sharkscrapper Жыл бұрын

You're very welcome Roger. Glad you found this useful.

@andrewpowell6457 Жыл бұрын

Just Circuit boards. LOL keep up the good educational vlogs my friend.

@sharkscrapper Жыл бұрын

Will do my friend.

@billyb5057 Жыл бұрын

cool information my friend board identity looks a bit of a minefield *always a full view🤓Au💯left a like👍*

@sharkscrapper Жыл бұрын

The good news that mistakes in board identification doesn't lead to explosions 🤣

@josephcormier5974 Жыл бұрын

Thank you sharkey this is very helpful for lots of people I even found it informative. Thank you for sharing this six stars brother

@sharkscrapper Жыл бұрын

You're welcome Joseph. If I've helped at least one person, I've been successful.

@coryj1811 Жыл бұрын

Verdy nice 👌

@sharkscrapper Жыл бұрын

Thank you

@BushDogScrapper Жыл бұрын

Thank you again for this awesome explanation about different types of peripheral boards! So much knowledge in one short video! CheeRs Shark 🦈

@sharkscrapper Жыл бұрын

My pleasure Bush Dog - glad you liked it.

@BushDogScrapper Жыл бұрын

@@sharkscrapper I always enjoy your videos and treasure your knowledge! Thank you! 🦈♻️🤘🏻

@sharkscrapper Жыл бұрын

@@BushDogScrapper You have no idea how much I appreciate that.

@leecampbell5736 Жыл бұрын

Awesome video shark.... ❤❤❤

@sharkscrapper Жыл бұрын

Thank you Lee

@krystiankucharski7299 Жыл бұрын

Oo part 2 🎉🎉🎉

@sharkscrapper Жыл бұрын

🤙🏻🤙🏻

@ScorpionMetals Жыл бұрын

Great video

@sharkscrapper Жыл бұрын

Thanks

@karlan3016 Жыл бұрын

Thank you so much ! Love your Channel & the community benefits so much from people like you making concise, focused, and informative videos. The journey to your channel has been too long in the making so I’m upvoting every chance I get. Sifting through so many videos with titles like - “I FIND SO MUCH GOLD from old computers FREE MONEY so easy ASMR” that are 100 minutes long and involve only close shots from high tech cameras inside whst looks like a professional chemistry lab or industrial milling operation with no further explanations…….everybody has their own cup of team but come on…😂. Appreciate you

@sharkscrapper Жыл бұрын

Thank you Kar - great to have you here. I understand your frustration. While those high tech vids can be interesting, they don't usually provide the answers most folks are looking for. Your feedback is very important to me as I continue this journey, thank you.

@karlan3016 Жыл бұрын

@@sharkscrapper thank you kindly!! Cheers from Wisconsin!

@FloramaeCormanes-gw6tt Жыл бұрын

Hello from PH❤❤❤

@sharkscrapper Жыл бұрын

Hello Floramae

@johnspargrove4816 Жыл бұрын

Boy this helped me out a lot thinks shark

@sharkscrapper Жыл бұрын

You're welcome John.

@johnspargrove4816 Жыл бұрын

@@sharkscrapper think you so much I just got a bunch of Cisco stuff and computers and this helped me a bunch you are the best

@sharkscrapper Жыл бұрын

@@johnspargrove4816 Sweet! CISCO is almost always good stuff.

@johnspargrove4816 Жыл бұрын

@@sharkscrapper yes there is a lot of gold pins and very nice looking boards for shore thinks for all your help sir

@simonkh7278 Жыл бұрын

Hey. In Europe there is a grade for LCD strips, and it is priced 7.30euro/kg, just bit worse than older motherboards. thanks for a review

@sharkscrapper Жыл бұрын

Very interesting Simon. Thank you for sharing that.

@supposedlycollectable4220 Жыл бұрын

I think boardsort should sponsor you if they are not already If you could get an affiliate link from them I would use it

@sharkscrapper Жыл бұрын

🤣 I'll talk to Chris about sponsorship.

@jayr9810 Жыл бұрын

Appreciate the info, ever do a cost analysis of removing components to upgrade to high peripheral vs low? I know it will depends on the board and the price is at least 2x difference but wouldn't the weight loss would be more than 50%

@sharkscrapper Жыл бұрын

I've not been able to do a real cost comparison because it is too dependent on the type of board. But here's a link to a video I did with Chris at BOARDSORT.COM where we talk about this: kzfaq.info/get/bejne/oN1zksZ0xrrRYIU.html

@jpgolias Жыл бұрын

Great video. Question about removing other components should you also remove the capacitors? Keep up the great work!

@sharkscrapper Жыл бұрын

Generally speaking it is not necessary. Those caps tend to small and light weight. However, if you do see a big chunky one it wouldn't hurt to remove it.

@jr-a-cat Жыл бұрын

Thanks Shark :calculus and trig was easier .Hey Chris if you read this could keep an eye on my car red Vue at the train station .Shark the weather is awesome 73 sunny and clear here in Sterling Va. ten mim from Dulles Airport come on up .

@sharkscrapper Жыл бұрын

Enjoy the ride bud

@clarkepayne Жыл бұрын

Very good and I agree with your assessment. I have quite a few DEC boards with high density of ICs but not sure how to grade them. Do you know of any way to determine by number of ICs or date ? Or anyone who specializes in digital equipment items.

@sharkscrapper Жыл бұрын

I wish there was a magic formula that would make this so much easier. I've been researching this for a long time and I've found no data base or definitive guide - frustrating. I'm happy to take a look at some pics of your boards to help out. You can also pics to the Boardsort forum and ask. Some very smart folks there.

@Braxton_playson Жыл бұрын

The trickiest 2 catagories

@sharkscrapper Жыл бұрын

I agree, very tricky.

@patrickwormke7332 Жыл бұрын

really newbie question here. I have been watching your channel and think this might be a cool hobby to get into. How much stuff do you get that is not saleable or able to recycle? How do you dispose of it?

@sharkscrapper Жыл бұрын

A great question Patrick and I'm afraid the answer is, "it depends." So much depends on what you're going to scrap and what yards will buy in your area or if you're within reasonable shipping distance to Boardsort.com. For example - most PC's have a lot of plastic on and in them. If your yard requires the plastic be removed from the metal shell you'll have a lot of plastic to throw away. Fortunately, most yards will take the PC shells with the plastic on. If you strip insulated copper wire you'll end up with the plastic insultation that needs to go in the trash. Most motherboards have a small button cell batter, the CMOS battery, that needs to be removed. Most places will NOT take these in recycle and should not go in the house hold waste. I take mine to the county transfer station for handling. I'd say by far the greatest amount of trash you will generate is all the plastic that makes up the bodies of most electronics these days.

@kevinsturgess1475 Жыл бұрын

👍

@sharkscrapper Жыл бұрын

🤙🏻

@simonkh7278 Жыл бұрын

I believe Aluminum Electrolytic capacitors on the PCBs worth clarification. Any recycling of it in the States? From point of view of a true scrapper, I see about 10-15% nice 6061 aluminum when you dissasmble capacitors with some tools. it takes time. for now I put them to trash. Just curious if any recyclers accept them sorted separately at any rate, maybe at price of a shred? 😂

@sharkscrapper Жыл бұрын

I've not found anyone here that takes caps as a separate item. I'm sure that the board processors are sorting them after the boards have been shredded. There are some very clever ways to use eddy currents to remove Al from a shred stream. As you commented, it takes some extra time to get the Al from them, so I just leave them on the boards and let the big processors do it.

@Drummerjuicer Жыл бұрын

I really want to sell my stuff to boardsort but I’m in Canada. I know they don’t accept international shipments. Next time I visit the U.S. I would like bring them with me and mail them from Buffalo, but I have no idea about import fees, or if there is even any taking stuff across the border. Maybe shark scrapper knows?

@sharkscrapper Жыл бұрын

Sorry I have no experience shipping or moving this material across the US/Canada boarder. What I do know is that it is tough because ewaste is classified as "hazardous waste" so it requires extra paperwork and fees. Good luck

@keithgriner330 Жыл бұрын

😎👊🏻

@sharkscrapper Жыл бұрын

🤙🏻

@simonkh7278 Жыл бұрын

I believe ALL aluminum electrolytic capacitors are to be removed,

@sharkscrapper Жыл бұрын

Just to be clear - BOARDSORT.COM does not require that. However, if you chose to do that, go for it.

@jeffstoll986 Жыл бұрын

I have no clue on what you're all saying I'm just learning I feel very dumb at this I have no idea I was throwing them away I was throwing away and didn't think they were worth anything so not even a I still have no ideas I'm sorry I still don't have no ideas what way to turn with we don't have a place up here live in South Dakota parts order nothing up here so and far as I know nobody buys him up here that I found

@sharkscrapper Жыл бұрын

Jeff - hopefully this series I'm putting together will help you at least understand what you have. Can't help with not having a place to sell other than to suggest you see what it would cost to ship to Boardsort.com.

@jeffstoll986 Жыл бұрын

@@sharkscrapper I don't even know how to ship them I've never shipped nothing like that so I don't know if you got to have bubble wrap around them or what it needs or what it takes that's why I said I'm just at a complete loss on the whole samir of I'm sorry

@homersreluctantodyssey2508 Жыл бұрын

@@jeffstoll986 shark scrapper has excellent packing videos and i took his advice to set up an account with Pirate Ship and have successfully used it to print shipping labels at home, much easier than it all seems at first

@sharkscrapper Жыл бұрын

thank you, I'm glad the video was helpful.