Excavator Maintenance 1000 Hour Service pt1 - Komatsu Excavator PC200LC

Excavator Maintenance 1000 Hour Service pt1 - Komatsu Excavator PC200LC | Service Call Series

Рет қаралды 27,692

Күн бұрын

Join the TekamoHD Network: www.tekamohd.com/join-the-tek...
Need a HD mechanic? Book one at www.tekamohd.com/
A Komatsu excavator is engineered for versatility and built to take a pounding. But like any piece of heavy equipment, its lifespan and usefulness are determined by how it is maintained. Running a Komatsu excavator means you’ll need to do a 1000 hour service as part of your excavator maintenance routine. In part 1 of the 1000 hour service for the Komatsu excavator PC200 we cover:
- Engine oil change
- Replace the engine oil filter
- Fuel filter replacement
- How to change engine air filter
- How to change a hydraulic filter
- Drain/refill the pump drive, swing gearbox, and final drive oil change
We’re going to show you how to DIY a 1000 hour service, but please remember to refer to your machine’s operation and maintenance manual for further information.
SHORT VIDEOS COMING SOON! IN THE MEAN TIME, YOU CAN REFERENCE THESE:
Engine oil and filter change: • How to change the ENGI...
Hydraulic filters: • Yanmar C50R - How to C...
Final drive gearbox: • How to Change FINAL DR...
Air filters: • John Deere 650K Dozer ...
Fuel filter: • How to change a FUEL F...
🦺 SERVICE CALL
Our series on troubleshooting and repair for heavy-duty mechanics, heavy equipment operators, or DIY enthusiasts. This educational resource helps provide you with heavy equipment skills so you can conduct your own repairs or machine maintenance.
⌚ TIMESTAMPS
00:21 1000 hour service series
00:38 Book a 🛠️ mechanic at www.TekamoHD.com
01:14 In this episode
02:17 Guaranteed maintenance plan
02:36 PPE
03:03 Removing panels
03:13 Swing gearbox draining
04:03 Engine oil draining
04:25 Removing the old engine oil filter
05:37 Installing the new engine oil filter
06:11 Removing the old primary fuel filter/water separator
07:10 Removing the plastic bowl
07:34 Comparing the old filter with the new filter
09:53 Installing the new primary fuel filter/water separator
10:59 Next episode
11:13 Remember to 👍Like / 💬Comment / 🔔Subscribe!
11:20 Visit www.fortishd.com for parts
Got more questions about heavy-duty equipment?
** LEAVE US YOUR COMMENTS and we'll answer your questions!! **
🔔 BE SURE TO SUBSCRIBE TO OUR CHANNEL!
Check out more of our amazing machine maintenance tutorials:
/ tekamohd
Business Contact: media@tekamohd.com
---------------------------------------------------
🦺 OPERATIONAL SAFETY
Always ensure you are wearing the proper personal protective equipment suited for your procedure such as steel toe boots, safety glasses, hard hats, gloves, overalls and any other equipment suited for your task at hand.
---------------------------------------------------
🌐 CHECK OUT OUR PARTNER SITES 🌐
* FORTIS HD*
Affordable tracks, tires, & parts shipped to your door.
www.fortishd.com/
** RENT1 **
Heavy equipment rentals for fast and easy work on any construction job. Residential or commercial, professional or homeowner, they've got earth-moving machine rentals for you!
CANADA: www.rent1.ca/
USA: www.rent1usa.com/
** SMARTCAST EQUIPMENT **
Purchase used heavy equipment for an amazing price (ask about their Rent-to-Own programs!)
www.smartcastequipment.com/
** DRIP MARKETING **
This awesome video was proudly produced by them!
www.dripmarketing.co/
---------------------------------------------------
⚠️ DISCLAIMER ⚠️
Any information on heavy equipment operation available at this channel is intended for general guidance only and must never be considered a substitute for the advice provided by a qualified heavy equipment instructor. Any reliance you place on such information is strictly at your own risk. If you intend to operate heavy equipment, always ensure you meet the legal permitting requirements based on your geographic location.
Although TekamoHD takes all reasonable care to ensure that the contents of the KZfaq Channel are accurate and up-to-date, all information contained on it is provided ‘as is’. TekamoHD makes no warranties or representations of any kind concerning the accuracy or suitability of the information contained on this channel. To the extent permitted by mandatory law, TekamoHD shall not be liable for any direct, incidental, consequential, indirect, or punitive damages arising out of access to or use of any content available on this channel, regardless of the accuracy or completeness of any such content.
TekamoHD disclaims any control over, relationship with, or endorsement of views expressed by other KZfaq users. All user comments are from members of the public and do not necessarily reflect the views of TekamoHD. TekamoHD may at any time and at its sole discretion change or replace the information available on this channel.

Пікірлер: 28

@TekamoHD Жыл бұрын

SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD

@Senkino5o 2 жыл бұрын

I love me some Baldwin filters, almost always made in the USA. I always try to mark the hrs & or mileage & date in a legible position when I put a filter on cause you never know when a machine's going to be sold or the maintenance schedule start getting skipped. I figure that since I so often find myself in the position of maintaining gear with unknown service intervals I may as well make the world a little brighter for the next guy, you never know when the next guy might just be you.

@Sean-bp6xb Жыл бұрын

Thx. Watching from Ontario Canada 🎉

@jondoherty3678 2 жыл бұрын

Glad to see you don't put the oil filter on dry

@JALA578 Жыл бұрын

Had it so much easier with the lube truck. Just sucked out all the oil through the quick connect. Sure not all machine have them, but they are handy

@brandonkrol1925 Жыл бұрын

Super late question but why do you pre-fill the fuel filter when the komatsu’s have a filter primer right on the housing?

@Alasdairryan 2 жыл бұрын

I use komatsu filters for my komatsu machine, if you used komatsu filters then you could avoid the fuel filter bowl issue

@aaronmoore5552 2 жыл бұрын

Or just cross reference to the exact filter.

@nicholassutherland4267 2 жыл бұрын

U make me laugh in a good way

@tjfaulkner7897 2 жыл бұрын

Hey bud. When doing these services take a bucket or 2 and cut it down and make a smaller catch. Then you won’t have to shove the whole thing up in there. Then just keep them for ever and ever. 🤘🤘

@tjfaulkner7897 2 жыл бұрын

Also not sure on the -8 machines. But I know for a fact the tier 4 machines do not want you to pre fill any filters.

@TekamoHD 2 жыл бұрын

Great advice!

@keatonmenefee9115 7 ай бұрын

Does pr88 work pretty well?

@Hassan-7311 4 ай бұрын

After how many hours should we change the engine oil?

@francoishamman2649 2 жыл бұрын

Being a Heavy Duty mechanic myself here in South Africa, there isn't much difference if any between how we do services like that, even have the same brand filter available that was used in this video.

@hloni1248 2 жыл бұрын

Hi Francois, How does one get started as a heavy duty mechanic in South Africa? I have experience working with small engines on generators and servicing high lift pumps. Any advice will be useful, thanks.

@francoishamman2649 2 жыл бұрын

@@hloni1248 you will have to find a oem company to offers apprenticeship and do your 4 year work, or find a company that will employ you with the experience you have and after 4 or 5 year apply for trade test

@hloni1248 2 жыл бұрын

@@francoishamman2649 Thanks

@jesiebertocura7809 Жыл бұрын

@@francoishamman2649sir can you help me to work abroad.. I'm a mechanic here in the Philippines in mining industry

@xushenxin 2 жыл бұрын

how long will this machine last? if you maintain it well.

@the902giant 2 жыл бұрын

I won’t lie and say I’m qualified. I’m not. I’m in college for truck and transport. However most heavy equipment is built extremely well and with longevity in mind. If you maintain something well it’s not entirely unlikely to get 30-40 years depending on your climate. Here In the east things rust so badly that they will be retired long before it’s due because they rust out. And for that same reason, a lot of people don’t take care of them well. So to wrap it up, they can last a lifetime, if you live in the right climate and maintain it well. The work it does also affects its lifespan as well, obviously

@Senkino5o 2 жыл бұрын

@@the902giant It depends how its used Will, if the machine gets abused and the operator doesn't grease it it can lose the ability to effectively do essential things, enough slop in the pins and bushes and maybe you can't grade worth a lick, maybe it loses the swing ring for the same reason or another, if both those things happen at once on a 20,000hr+ machine and it springs a leak around the pinion then it goes to the scrappers, that can all happen in 10 years of use. Usually undercarriage wear will decide even a well maintained machine's fate.

@iquote7806 2 жыл бұрын

7000 hrs to 10000 hrs if well maintained

@keithjacobs1020 Жыл бұрын

Old post but I have a some track hoes with 10-15,000 hrs that run like a top