Building a Ported Subwoofer Box w/ Kicker SOLO X 12 | How to Build DIY Slot Port Using CAR AUDIO APP

Рет қаралды 326,988

Жыл бұрын

Having a blast hooking up our buddy Remy with a fresh new subwoofer box for his 12" Kicker SOLO X!!! Had a bunch of hilarious things happen along the way, but we show how to bust through no problem. Come join the fun as we make this simple enclosure design and get that good ole square sub flexing nice! Thanks for watching and subscribing :)
Need Stuff For Your Sound System?
Shop Showtime Electronics w/ Code "EXO"
www.showtimeelectronics.com/d...
Follow Me Here:
/ exocontralto
/ exocontralto
Help Support The Channel :D
/ exocontralto
Things In This Video:
Getting Supplies For Making a Box
Cutting Wood In Parking Lot to Fit
Checking Out Remy's Suburban
Playing Some Free Air Excursion
Explaining Box Designs & Port Tuning
Building The Sub Enclosure
Carpeting Outside For Good Looks
Wiring The Subwoofers Voice Coils
Demoing the BASS!
Music By: Epidemic & KZfaq Music
Licensed under a Creative Commons Attribution license (creativecommons.org)
Love Subwoofers & Loud Bass?
Sticks Around For MORE!
EXOcontralto
Bassheads Unite 2023

Пікірлер: 703

@EXOcontralto Жыл бұрын

Happy 4th!!! Hope you enjoy this fun little bass project! Even after all the hilarious hiccups, it was still a great time hanging out and laughing 😃 Thanks for watching!!! Need car audio gear? Check out Showtime! showtimeelectronics.com/

@Car_audio1 Жыл бұрын

Hi love all your vids boggesy fan and thats one of my dream subs

@stanleyspankler5671 Жыл бұрын

I bondo mistakes that happened like that with bearings

@martyostrander4034 Жыл бұрын

You

@markkoviack3234 Жыл бұрын

Get you some 1/4inch spiral flush trim bits. They are hands down the best. The big ones you are use work good but the bearings don't like them speeds

@HellTriX Жыл бұрын

What is the android box app?

@jonadkins9339 Жыл бұрын

Exo: "We just gotta out of home depot" *Lowes in the background*

@EXOcontralto Жыл бұрын

WOOPS 😅

@riveralley Жыл бұрын

@EXOcontralto They're kind of the same thing. Hope you're having a great Day EXO!!!!

@bengraham9132 Жыл бұрын

Lol, my thoughts exactly

@overpricedsundown Жыл бұрын

Same shit

@johnyz82 Жыл бұрын

That's the first thing I noticed also lol.

@93nyjetsfan Жыл бұрын

Flush trim bits are not meant for cutting through wood, they’re designed to trim. I learned that the hard way myself. The bearing on my Bosch bit seized up, luckily it didn’t explode so I didn’t damage my project. Bought a replacement and haven’t had a problem since, it’s been several years now

@TH-en9fl Жыл бұрын

Looks like your flush trim bit might be burned up and creating way more heat than a sharp bit and overheating the bearing. Also you had the depth alittle shallow on the outside in a cpl of shots that might have hurt the first one but that many failing is crazy.

@orthjames1555 Жыл бұрын

I was just going to say that bit need to change 😅

@steventhomas5865 Жыл бұрын

The sound told me and then him adjusting the speed showed me it was spinning too fast.

@TheLivingTribunal Жыл бұрын

As a carpenter i can tell you how funny it is to see him using the router like that , you have to do it gradually not once :) but you have good videos anyway ,thats why i subscribed years ago.

@JustinGrosz Жыл бұрын

More then anything. The best part of this is to see EXO has made yet another life long friend in Remy. Great to see you two work together outside the job. Car audio building friendships is such a great thing!

@rndmlogin 3 ай бұрын

This is why I love watching these videos. Just some friends do a fun project! I'd hang out with these guys and have a fun time doing it.

@mroldschool609 Жыл бұрын

The trimmer is only meant to trim a tiny amount, make sure u cut with jigsaw as close to line as u can then use trimmer......the amount of heat and vibration is far to much work for the bearing cutter.........everyone has done the same m8

@JasonWW2000 Жыл бұрын

Yes, exactly!

@claybirdyshaw5737 2 ай бұрын

The biggest problem was actually that the bit wasn't deep enough. If you look at the very first trim he did on the baffle overhang there was a thin piece of wood left all the way around the perimeter of the box that he had to sand off. That was wedging between the bearing and the bit causing lateral force which radial bearings can not handle. It is still a good idea to trim smaller amounts and don't use it for cutting, but that would not cause 5 or 6 bearing failures with that amount of cutting. he needs to drop the bit a little or get a longer flush trim bit if that isn't possible.

@nicholasferrell3043 Жыл бұрын

EXO just is such a natural genuine person especially when he's working, he's a funny, genuine, funny, unique, joyful guy. You can't really find that nowadays..

@luckynumb1 3 ай бұрын

Exo! Huge tip for carpeting, I ran a sub box business and carpeting seams was the hardest for sure. My biggest trick though, was having a can of black spray paint! Spray along where you are going to lay the carpet before gluing, and even if there is gaps, it will black to match the carpet and not look as bad. Hope this helps!

@shagga070 Жыл бұрын

spraypainting the inside of the port black will make the box look better

@JasonWW2000 Жыл бұрын

Once the carpets on, brush that black paint on! Lol

@GHCarbon Жыл бұрын

pro tip. use smaler flush trim tool if going full cut like in 39:20 that big of a tool create a lot of friction and a lot of heat. and that bit you use is shot :P

@JasonWW2000 Жыл бұрын

Yes, good points.

@matmichalke5734 Жыл бұрын

The drill press idea can work if you use the correct bit, the one you used had a screw tip to help the spade pull through 2x material. Use a holesaw bit

@MISHA_M_SPL Жыл бұрын

Трек в конце по радовал )👍

@acesontilt77 Жыл бұрын

Those router bits are DULL AF! Time for a new set bro!

@CajunReaper95 Жыл бұрын

I’ve been doing my best just got over one of the hardest times of my life, found out I had stage 3 squamous cell carcinoma of the head and neck aka head and neck cancer in 2021 and finally beat it last year, 7 rounds of chemo and 35 rounds of radiation, took a toll on my body but I am doing my best to get back up to where I was.

@sebitester 3 ай бұрын

Let's go! Keep going bro

@Mikessv1 Жыл бұрын

Exo is the man, I love how he is always helping everyone, Super humble and awesome dude.

@Maswan._. 10 күн бұрын

damn EXO just suggested giving the box the ol HAWK TUAH 😂🤣 40:26

@GigawattGarage Жыл бұрын

Watched the whole vid, super interesting to see the whole process. I built my first box with my friends dad who builds cabinets and has no idea about car audio. Just followed manufacture’s a sketch up diagram and turned out great. Getting ready to build a bigger better box now so it’s nice to see the whole process from someone who knows how to do it correctly

@Mr.NiceGuy80 Жыл бұрын

Man, happy 4th buddy. Your positive energy is contagious. I really needed it today.

@EXOcontralto Жыл бұрын

Appreciate you watching! Hope you have a great holiday tomorrow bro

@olwethuradebe7869 Жыл бұрын

what i like about u bro, is the fact that u don't hide your mistakes. that helps us a lot. keep up the good work👊

@YodasButtCheekz Жыл бұрын

This was great to watch, I'm very new to car audio anything and trying to learn all that I can. I love that you leave the mistakes in. I actually gained something watching this and this channel has been great to watch the last few days.

@pnwscitech1589 Жыл бұрын

Hey EXO! Love your vids. Just a friendly suggestion, you may need to look into sharpening your flush trim bit. If you see smoke when cutting its a dull blade, that's why you see the dark spots on the plywood. Edit: I posted this right before the bearing blew up. The heat from dull blades can destroy the bearing. That's likely why it's blew up on you.

@chob8668 Жыл бұрын

You gotta love the videos like this one thing after another going wrong with the build but still managed to pull out a good box and vid 👌🏻

@chandlerlofton6536 Жыл бұрын

Can’t wait for the solo 15s to come out!

@josiahharris4393 Жыл бұрын

I’m tryna tell you

@bradfordbowman8203 Жыл бұрын

Love the content! Look forward to more of the megabuild with the 12 18s!

@fortyfukinseven Жыл бұрын

Huge love that you make videos for beginners. I've been messing around for years, but I almost always learn something when I see your vids. Keep it up, bro.

@tricombfarmer7320 Ай бұрын

I came to these comments to say “stop asking for a DEAL” you guys see what this took and how mad someone can get. Not everything is easy. Nice video kool ppl ima subscribe

@kalebdelong3781 Жыл бұрын

Heck yea exo! Always puts a smile on my face watching these. All the little behind the scene clips of you commentating over the router bearing issues. I just finished my 1989 Honda civics stereo with two psi platform 3 12s. All the bells and whistles, high power, carbon fiber, larger terminals, high roll surround, and the red f*ck it logo. Definitely the loudest or one of the loudest around southeast Idaho!

@Bobcatspiritdude Жыл бұрын

Happy 4th Exo & Remy . Cool box build 😎 One of things that's great about your channel , is you show mistakes and then explained what happened. You're honesty and good energy are always appreciated bud ! ! ! Bass On 💪😇👍

@kylewinstonpillay4165 Жыл бұрын

Appreciate the effort you put into editing these videos and the content... Stay strong bro 💪🏻🔥

@snnave1 Жыл бұрын

I’m done with carpet. I texture my boxes now. Looks a lot better than carpet

@ianprice2441 Жыл бұрын

Sweet build, guys!!! What a Blast!!! That thing was pounding for 1!! I can't wait to see the db test.

@Jonny2Fingers Жыл бұрын

I love build video’s. They are so satisfying to watch!

@CoquiAudio Жыл бұрын

Happy 4th!!!! EXO weuuu! 😊

@HillbillyRefrigeration Жыл бұрын

Thanks for coming in clutch with an awesome full length video. Glad to see Remy. Two down to earth bassheads bonding over bass I love it!

@JAM-ur8tj Жыл бұрын

The Solox has surpassed all my expectations I absolutely love it. Great video bro💯👍

@robertskelley3465 Жыл бұрын

Same wood I built my wall with!! It’s been very good to me. Sturdy and easy to work with. And not very heavy.

@sgtJOOSEcapeS Жыл бұрын

EXO and REM make a great 👍 team frfr... EXO mental health at home is kinda degrading and subs n box builds is his Savior 😊... I'm with you 😎💯 brotha

@johnebuckland Жыл бұрын

What a great instructional video. I will be coming back to this in the future. Glad to see Norfleet is looking good. Love ya EXO❤

@chichidouglas5078 Жыл бұрын

You should've ran the router around the port opening with a 3/4" round over bit. It looks better that way and it also reduces port noise. You can still do with the carpet on it if it's glued down tight or just trim it back a bit

@jayinmi3706 Жыл бұрын

For something like that sub opening, I'd use a spiral bit with a few bearings on it. 12vtools sells one with 2 bearings and one with 4 or 5. A normal flush trim isn't really meant to cut through wood like that. Might have been contributing to the auto-speed-changine router.

@hapkrs Жыл бұрын

Bass is an amazing thing. Good job exo.

@Mr.NiceGuy80 Жыл бұрын

Dude, when Remy was talking about shooting yourself with the brad nailer. I remember my boss passing out when I shot myself in the hand with a framing nailer. So funny.

@EXOcontralto Жыл бұрын

Dammn dude! Bet that made some fun shit talking material for the guys to never let you forget lol 😅 Glad you weren't hurt bad tho!

@Mr.NiceGuy80 Жыл бұрын

@@EXOcontralto t'was only a fleshwound! I pulled the nail back out, luckily it didn't get any bones. Woke up my boss and got back to work! LOL

@EXOcontralto Жыл бұрын

@@Mr.NiceGuy80atta boy!!!

@muttBunch Жыл бұрын

If it moves a sunroof and shakes the shutter on a camera, that's a win for me.

@SbassLaser Жыл бұрын

I definitely want to see that thing on a meter! for a single sub on 1200 watts its lookin loud!

@flat4ification Жыл бұрын

I love how you said you just left Home Depot with Lowe's in the background. That is awesome to me and then I love the slam on the store not having someone there to cut the boards for you with the next shot was of you doing it yourself in the parking lot. I have enjoyed your content since you built Little Blue but this video made my day. To beat all it was an hour long as well!!! Thanks EXO for making my day special!!! You are great and I wish the best for you!!! I will be patiently waiting for your next video!!!

@Hless421 Жыл бұрын

Hell yea!! Taking it back to the roots. Simple box build.

@MrDopey32 Жыл бұрын

Happy 4th to you as well EXO! Great video! Always used to love when helping a buddy do a system, super fun!!

@sebastianvazquez5320 Жыл бұрын

I'm always excited to see when you upload. Literally left home early and got the notification you uploaded. Can't wait to see a vid of progress on your van

@EXOcontralto Жыл бұрын

Hell yeah, hope you enjoy watching! Quite a few laughs to be had on this one 😅

@itsalwaysfriday9766 Жыл бұрын

The edge where you bit off too much wood can be filled with either body filler or fiberglass filler and then flush trimmed again. You'd never see it under the carpet.

@cammims7645 4 ай бұрын

Nice nice. Thanks for the video. I got an old school Kicker Solo X 18. I’m tuned too 33 hertz. Using a Jp 2300 amp slamming on the Lows and Highs. Love it! Gave me some ideas thanks for the video!

@midbass.maestro Жыл бұрын

Im building a steel framed parallel tuned 6th order bandpass blowthrough and you are my biggest inspiration to tear out my perfectly dialed in ported setup for something more interesting. Me and my gf been watching sience franky

@LumenateTV Жыл бұрын

good to see ya getting back to your roots EXO and hooking up a homie in the process doesn't get any better than that.

@timothyg2719 Жыл бұрын

switch to spiral flush trim bits. Up/down spiral bits work best for thick baltic birch. Cuts right through it. Those regular flush trim bits sometimes won't last through 2 minutes of trimming.

@arnoldsalazar5851 Жыл бұрын

This is why I like this kid, hand built… no cnc laziness.

@JasonWW2000 Жыл бұрын

Everyone wishes they could do CNC cutting. It's okay to cut by hand, but dissing the better option is just strange.

@arnoldsalazar5851 Жыл бұрын

Don’t get me wrong guys CNC makes some clean stuff though.

@SbassLaser Жыл бұрын

CNC isn't lazy when you think about how much time it takes to learn how to design and program the machines. It's just a different tool but still takes work to use it properly

@DarrenShaw-ev5tb Жыл бұрын

Dude ! The way you operate that router - Scares the crap out of me !! ( lol

@EXOcontralto Жыл бұрын

🎶 I AIN'T EVA SCARED 😎 🎶

@DarrenShaw-ev5tb Жыл бұрын

@@EXOcontralto Crazy !

@MegaBillWood 10 ай бұрын

Nice to see Exo working with a good friend. Made my watch even better.

@rubensdomm Жыл бұрын

I love it, the dynamic duo, excellent EXO video.

@adamnorwood8084 11 ай бұрын

It was great to see y’all at XS power show. Thanks y’all for taking the time

@paulmessamore2440 8 ай бұрын

I just got an old L7 and needed a box and poof your video popped up nice to see a video on my feed again was thinking about you the other day see ya still having fun. Glad to see brother

@MAGGOT_VOMIT 11 ай бұрын

Love seeing everything doin' the WIBBLE!! 😵‍💫👍

@thomasshell3730 Жыл бұрын

I had that same kicker set up pulled out the kickers and threw in 2 skar sdrs and that box is literally perfect for them

@jarrodsargent5818 Жыл бұрын

Hey man, instead of a spade bit I'd recommend using a hole saw to get those radius' on the dowel :) Love your videos man, you do sometimes make me feel like you are the "Blippi" for car audio enthusiasts and I love that 😂

@smokeyou812 Жыл бұрын

That's a sexy box and an area like the port that's exposed if you take a lighter real quick and go around the cut edge it cleans up stragglers quite well

@billybullfrog Жыл бұрын

Once that speaker breaks in get bigger amp and throw some power at that beast💪

@jakedainty6935 Жыл бұрын

love your vids EXO

@Chuck_Sanders Жыл бұрын

Love Blonde Wood. Used it for years, and just looks great as well.

@descolero1 7 ай бұрын

Hellyeah some exo backflip action! 😮

@psementalist Жыл бұрын

I'm getting more and more closer to having all of my pieces of the puzzle for my 3rd and last final rebuild up project

@norcarl707 Жыл бұрын

so awesome. Big fan of all your videos..

@mjstutter12 Жыл бұрын

Have had my feud and diablo flush trim bits for years and even lent them out never had a bearing come off mid cut also a larger plate on bottom of router helps keep it straight to material alot keep it up

@CharlesK441 11 ай бұрын

My goodness that bass was bumpin. Now I’m sure my system is below par with 2x12s and bags of power. Guess it’s time for a custom made box for me! Awesome 😊

@long-range-eliminator 10 ай бұрын

Great content xo.. glad had some good o tennessee guys on here

@Burden1113 Жыл бұрын

You're the best EXO. Enjoyed every minute.

@MaxFiveGames Жыл бұрын

OMG an hour of EXO... We are living good today boyz!!!

@pnwtundra07 Жыл бұрын

Wouldn't be a exo video without some chaos

@ishkabibbledib2729 Жыл бұрын

Lot of fun watching this!

@KeepUrRights Жыл бұрын

Nice job bro I get excited when I get a notification that u posted a video n can't wait till I get off work to watch it wish I had someone like u to help me with the dimensions n help build a box

@RyanBassForLife Жыл бұрын

Nice and yeah that Kicker Solo X is nice.

@ricardomiguelcunninghamel4468 11 ай бұрын

The results are amazing 💪🏾🔥

@brandenwalrath3012 Жыл бұрын

Wow that is amazing!

@SirSloop1919 Жыл бұрын

classic EXO content right here!!!!

@franciscodavila2315 Жыл бұрын

Good job on that custom bass box. I like it!👍👍👍👍👍

@skidogg113 Жыл бұрын

Nice video bro love the longer video btw...

@zekoon2 2 ай бұрын

Exo You have a very wonderful, funny and humble friend. You guys are awesome and good job bro 👍

@rtronicslab1253 Жыл бұрын

have learned so much...confident enough to build my own one...thanks man😊

@ruikazane5123 Жыл бұрын

Gosh darn it. Use genuine name brand bearings for your router bits. NSK, NMB, maybe even Timken, INA, SKF and others. Save you from some pain. All in all it bangs! Hell yeah brother!!!

@tonyfoley9988 Жыл бұрын

EXO, you've got a nice little setup with your shop, I'm jealous! Anyways another great video bud. I really hope to meet you 1 of these days because I've learnt allot from you and your channel. Keep it up bro.

@reinel9606 Жыл бұрын

Watching from Philippines 🇵🇭

@u9Nails Жыл бұрын

Remy's next box will be a carpet mosaic finish. 😀 Great build guys! You really showed that it's about the culture and experience.

@johnnybojorquez3489 11 ай бұрын

man !!! i love youre vids ! super humble audio channel brother 😅

@hpacalypse79 10 ай бұрын

Sick man! Great job!

@crttechs873 Жыл бұрын

I love watching exo

@AldenPez Жыл бұрын

Sorry EXO! Ive been putting off watching the cideo because i havent had an hour to sit down and watch it! Cant wait to see more progress on the big build!

@johnstarks5323 9 ай бұрын

2:15 In a million years, I would have never thought to do that.

@wiredperformance6130 Жыл бұрын

Predrilling prevents the screws from following imperfections. Sure you saved a little time but at the expense of the boards integrity! Keep up the fun!