See Camper/RV Temperature from Anywhere in the world & get alerts!

Рет қаралды 15,040

EXPLORIST life Mobile Marine & Off-Grid Electrical

Күн бұрын

In this video, we will show you how to connect a Bluetooth Temperature Sensor to the Cerbo GX. We are using RuuviTags to monitor the temperature of our plumbing enclosure as well as the temperature of the camper van.
RuuviTag is weatherproof, wireless, and measures the temperature and air humidity in our camper van.
We wanted to get notifications on our phones whenever our water tank in our plumbing enclosure was in danger of freezing as well as when the van was too hot for our dog, Pyros. So, we are placing one temperature sensor inside our plumbing enclosure, and one just somewhere in the living space of the campervan. In order to receive notifications when we were out of bluetooth range of the Ruuvi tags, we are syncing the sensors to the Victron Cerbo GX to relay all that information to the VRM portal. That way, whenever we have internet signal, we can monitor or be notified of those temperatures.
➤Link to RuuviTag: amzn.to/3PgS8dS
➤Victron Cerbo GX: shop.explorist.life/shop/all-...
➤Victron Touch 70 GX Screen: shop.explorist.life/shop/all-...
➤Victron Cerbo GX Wiring Kit: shop.explorist.life/shop/all-...
➤Link to VRM Portal: vrm.victronenergy.com/
➤Shop the EXPLORIST.life Store: shop.explorist.life
➤Shop Battle Born Batteries: battlebornbatteries.com?afmc=explorist_bb67
➤Binge the Transit Van Build: • The Ultimate Camper Va...
Here are some additional resources that you may find helpful with planning and installing your DIY Camper:
➤ FORD TRANSIT DIY Camper Van Electrical Install: • DIY CAMPER VAN ELECTRI...
➤ DIY Sprinter Camper Van Electrical Install - Full Tutorial: • DIY Sprinter Camper Va...
➤ DIY Camper Solar Wiring Diagrams: www.explorist.life/solarwirin...
➤ How to Perform a Power Audit: • How Much Solar Power D...
➤ Basic Parts & Components of an Electrical System: • Basic Solar Parts Need...
➤ How to Cut Wire: www.explorist.life/how-to-cut...
➤ How to Strip Wire: • How to Strip Wire from...
➤ How to Crimp Wire: • How To Crimp Wire Lugs...
➤ How to Make MC4 Connectors: • How To Make MC4 Connec...
➤ How to Wire Solar Panels in Series-Parallel: • How to Wire Solar Pane...
➤ How to Crimp Wire Ferrules: • How to Crimp Ferrules ...
➤ How to Wire an AC/DC Breaker/Fuse Box: www.explorist.life/how-to-wir...
00:00 Introduction
00:29 Connect RuuviTag to Cerbo via Bluetooth
01:25 Renaming RuuviTag in Cerbo
02:04 Change from Celcius to Farenheit
02:31 VRM Portal
03:09 Set Up Alarms on VRM Portal
04:20 Testing - RuuviTag in Freezer
04:36 2nd RuuviTag - Van Temp Sensor
05:02 RuuviTag App
05:19 Outro

Пікірлер: 21

@EXPLORISTlife Жыл бұрын

*Ruuvitag:* amzn.to/3PgS8dS

@ccastello Жыл бұрын

I’ve got 7 of these sensors - Outside, Kitchen, Bedroom, Freezer, Fridge, Basement, and Power (on the outside of my Victron Multiplus). They are great.

@jdaleske2 Жыл бұрын

Thanks for the great walk-through. To me, an obvious location is inside the electrical enclosure. You might have a venting fan turn on at one temperature and an alarm when it gets over a higher temperature.

@leelendon1482 Жыл бұрын

Love this channel , providing a simple but good understanding of electrical 12v circuits . Im at that stage now and considering victron. Expensive but from what I see less interaction when setup properly . More time having fun , than monitoring everything

@earlzeis35 Жыл бұрын

If the range is good and strong enough, putting them in the fridge and freezer would be beneficial.

@stephencantbewrong8250 Жыл бұрын

Now I am going to have to buy some ruuvi tags!!!!!! Oh no! Thanks for the great idea!

@EXPLORISTlife Жыл бұрын

😂😂Glad it was helpful. Cheers!

@recoblade1465 Жыл бұрын

I originally looked at these for a van build, but as a truck driver, who has had multiple refrigerators die on me, I like the fact that I can toss one of these in the fridge and know when the next one dies

@tikoy1955 Жыл бұрын

Good informational video. Truly enjoy your videos.

@EXPLORISTlife Жыл бұрын

Hey tikoy1955, Thanks so much! Cheers!

@silvanocometta9760 Жыл бұрын

Thanks Nat. May I suggest you make a video on how to show the temp data from RUUVIs on the main page of the screen connected to the Cerbo, that is without VRM. I used Gui Mods for that but at some point the display stopped showing the temp data of my 3 RUUVI tags. You may show easier ways to achieve that. Best regards from Switzerland.

@GrimaldisOnTour 10 ай бұрын

Yes I haven’t been able to figure out how to do this either.

@Chickenhill209 Жыл бұрын

How do I change it to Fahrenheit on the Portal?

@alanblyde8502 Жыл бұрын

I am installing a contactor to charge another battery and will be placing one of these underneath the contactor base “like a stand-off” in between so I can monitor temp to see how it goes, great bit of kit are Ruuvi

@BennyTheNerd Жыл бұрын

Can you add the RuuviTags to a fridge/freezer and get notifications as well?

@KevinM-ov3qr Жыл бұрын

Have you gotten the motion sensor to work with cerbo?

@april7_ Жыл бұрын

Ruuvi made in Finland! You can just translate what Ruuvi really means in Finnish! 😄

@nebulight Жыл бұрын

Doesn’t Victron recommend an external Bluetooth adapter for this application? Something about the internal radio not being strong enough?

@robertvanessen8934 Жыл бұрын

The cerbo chip has a known heat flaw..this only works if u chip is cool..if cerbo gets warm bluetooth disappears at least with fw3.0..the fix is a dongle