F-35A Lightning II Academy 1:72 Jet Fighter Mode

No video

F-35A Lightning II Academy 1:72 Jet Fighter Mode - Part 1

Рет қаралды 205,776

9 жыл бұрын

Part 2
• F-35A Lightning II Aca...
My web: www.plasticmodels.eu/
David Damek
Music/Hudba:
Grégoire Lourme - Armistice
Grégoire Lourme - Rise of the Machines
Grégoire Lourme - Laser Tournament
creativecommons.org/licenses/b...

Пікірлер: 122

@miguel.martinez.fotografia 7 жыл бұрын

If you are capable of such grade of detail, in a 1/72 model, I can´t imagine what can you do in a 1/32 model!!! Amazing job. Your videos are hypnotics.

@1farp 8 жыл бұрын

for me, at the very least, this music is allowing me to pay attention. other videos that blast death metal ruin my ability to focus on the video. thanks

@wakemanedwards3450 9 жыл бұрын

Thank you so much for showing me which fine detail brush you use in this video. Since seeing it, I have ordered one from Tamiya, and it is great quality as is most every thing I try from Tamiya. Thank you so much for being gregarious to share with us what tools give the best results as well as painting products and finishing products. This is a big help my friend!

@rashwerewolf 5 жыл бұрын

Потрясающе. Тут один делал 1/48, так там и близко не было такой аккуратности и тщательности, как тут. Великолепные уверенные руки и масса терпения, не говоря уже об опыте. Уважение тебе и делу рук твоих!

@htiz5147 2 жыл бұрын

The level of detail you put into that cockpit is amazing

@bigsexymanbear1950 5 жыл бұрын

You are hands down the best model builder on youtubes.

@michaelsimonell8081 6 жыл бұрын

I love all the details and especially working on these aircraft it makes me so happy you getting a lot of the details correct even though certain parts nobody will see like the wiring

@michaelsimonell8081 6 жыл бұрын

Also if you ever do an f-15e those jets are extremely dirty the top of the jet gets dusty with lots of sand and dust the landing gear gets a splash of brake dust along with the landing gear doors and the underside of the whole aircraft gets smudged up with oil and grease. Also the fuel connection for the conformal fuel tanks leak a little so it will leave like a shiny trail down the side of the jet and when the gun fires it will spray the front and behind of the gun with carbon. Oh and because the jet leaks so much it will usually stain the concrete where it sits black.

@nachthai75 9 жыл бұрын

Amazing work once again, excellent!

@georgebrown6540 7 жыл бұрын

As always, what can I say that fellow mortals havent already, thanks as always for sharing.

@Steven197106 7 жыл бұрын

Great video, would love to see you make a airfix 1/48 english electric lightning.

@seth800 6 жыл бұрын

GOD DAMN I freaking love the detail on that cockpit I cant do that

@ThePvthudson 9 жыл бұрын

Your talent always amaze me!

@marcorivignanivaccari1664 7 жыл бұрын

Excellent video

@Homerlovesbeer2 9 жыл бұрын

Awesome work again Martin. It's looking sensational. Did you apply the Tamiya wash in the bays straight over acrylic paint or did you gloss coat first? What are you using for referances to detail the bays? Again, you are an absolute joy to watch! Fantastic job on the belts as well.

@rizdalegend 5 жыл бұрын

Would love to see Fairchild Republic A-10 Thunderbolt II, aka Warthog !

@Hossman757 4 жыл бұрын

Really wish you would build more 1:48 or 1:32 models. Your detail work is insane.

@jjmodelling55 9 жыл бұрын

Looks fantastic Martin been watching you for a wile now and your work is epic. What washes do you use? -joe

@isaacnickel 5 жыл бұрын

I love the 1/72 scale!! Love ur vids so much! Rn I have a italerie and a Hasegawa F35 on the shelf, do u know how they compare to the academy models?

@RobertCampbellRC 4 жыл бұрын

absolutely superb

@stephentebbutt7161 8 жыл бұрын

Hi again Plasmo. Could you do a video and show us you hobby /workshop think your subscribers wold get a blast from the inner sanctum. Cheers Steve

@morriscustommodelshop8345 9 жыл бұрын

Six of those flew over my house the other day at about 500 feet. Man what a sight. God bless all here

@morriscustommodelshop8345 9 жыл бұрын

I hope you can I've seen some great ones here and the Air Force museum in Dayton, Ohio is another great destination.

@youtubejunkie6370 8 жыл бұрын

Hi where did you get the green stuff to make the seat belts cheers

@sevatorion7975 4 жыл бұрын

Nice to see some warhammer paint in use!

@markray814 3 жыл бұрын

Plasma - please remake this. You’re new stuff is great and I can’t even make it through this one

@canallucasrocha 7 жыл бұрын

Please do assembly of the F5 60 years senta a púa of the Brazilian Air Force?

@danpasgrits7615 6 жыл бұрын

What are you using to paint those fine lines? Looks great

7 жыл бұрын

Opět super!!!! Tohle by jste mohl vydat i pro nás nováčky jako návody a tipi v knížce ;)

@Exparion724 6 жыл бұрын

You build those models very good but I want to ask u something; are those tools which you use to build the plane sold with the model kit? or they sold separately? And those stickers. Thanks

@georgebacaoanu8305 9 жыл бұрын

Hi Martin, nice work, well done! I saw that you use some kind of plastc tube... what is this? from where do you get? thanks and again bravo...

@no.chance 9 жыл бұрын

Hi, thanks for the inspiring videos! What is the instrument you are using at 3:13? I see you use it a lot. Is it like a pin vise with a needle? How does it hold the paint wet for so long? Thanks!

@user-ep8en6be1j 7 жыл бұрын

Bonkerz A/V look 2:30

@timsscalemodelbuilding4888 7 жыл бұрын

Bonkerz A/V its a tamiya paintbrush

@kannagi5070 8 жыл бұрын

For the cockpit, do you have to paint another layer of gloss before wash or you can just wash right ahead?

@Davidxcat 9 жыл бұрын

Veľmi sa mi páči ako ste vyrobil tie pásy z toho green stuff veľmi kreatívne. Dalo by sa neskoršie spraviť nejaké video o airbrushi? Čistenie, základné techniky a tak. Super video ďakujem.

@2411rob 9 жыл бұрын

like to see part 2, nice work so far. which brand of brushes are you using??

@Quadrant14 8 жыл бұрын

+Rob Hoekmeijer Tamiya

@joshem16 4 жыл бұрын

Would you please make the "B" version - thank you

@olm1974 8 жыл бұрын

hola que ese pincel tan fino que usas para pintar rayas tan finas minuto 4:00? plisss

@TomcatModelKits 7 жыл бұрын

I really wanna build this kit

@hafizullahmansor8942 2 жыл бұрын

May I know what size of the drill bit you used to drill the hole for weapon pylon?

@ricardomeirelles8616 3 жыл бұрын

Sensacional !!!

@magnuskaasen2985 3 жыл бұрын

What was it you used for weathering in the wheel Bay? The black tamiya fluid.

@christopherhunt7412 7 жыл бұрын

Hi Plasmo, I'm going to get the italeri version of the f35, but it does not state what blue to use for the seat, please could you tell me what you have used?

@idaemonplasmo 7 жыл бұрын

I used for seat Tamiya XF-8 flat blue.

@christopherhunt7412 7 жыл бұрын

Thanks very much.

@matthewjuliantara9544 7 жыл бұрын

are you already finished the italeri f35a ? what color do you used it at f35a italeri version?

@christopherhunt7412 7 жыл бұрын

Yes I have. I have used tamiya xf24 for the main body. I made seatbelts out of blue-tac, using xf8 and x11 gloss silver for the buckles. I used xf2 and xf54 for the panel line things. Came out very well.

@filipenobrega8644 6 жыл бұрын

PLASMO - plastic models how you do the wash? Can you tell me

@nadirrahman4082 8 жыл бұрын

What tool did you use to paint on the very fine lines? it's the one with the pointed metal end

@rurushu8094 7 жыл бұрын

Faiz Rahman It's a Tamiya paint brush www.hobbyking.com/en_us/tamiya-standard-pointed-brush-item-87017.html

@themechniclp2510 9 жыл бұрын

whats this for a butiful Music ?

@danbishop7177 7 жыл бұрын

what is a good plane to learn on? i want to learn these painting techniques before i try something like this.

@rurushu8094 7 жыл бұрын

Dan Bishop The old Tamiya 1:72 warbirds are cheap and really easy to build. They're also pretty cheap which is why I buy them.

@royking7304 4 жыл бұрын

Absolutely nothing Revell, Revell has massive molding problems. Stick to academy or Tamiya. They may be more complicated but the instructions are so clear and the fit is so good that the complexity isn't a factor.

@luispacheco6807 9 жыл бұрын

What´s the brand of the brush seen at 2m34s?

@A13tech 9 жыл бұрын

kúpil som si tie tamiya stetce ale vobec nie su take extra spicate a precizne, blunt brush S, treba ich nejako upraviť aby vyzerali ako tie vaše ? :)

@BMWBOOY 7 жыл бұрын

I'm building the same kit but when I start use tamiya panel line I was trying to clean it with Mr. Color thinner the cotton start to stick to the paint I sealed with tamiya and Vallejo varnish

@BMWBOOY 7 жыл бұрын

Also the tamiya wash is not cover smoothly like you I gave several clear coat

@idaemonplasmo 7 жыл бұрын

Mr. Color thinner :-D ou bad choice for wiping. I use x-20 enamel tamiya or mig thinner for washes.

@BMWBOOY 7 жыл бұрын

PLASMO - plastic models thanks but also I found the paint is not selling well. What the best varnish to seal the paint

@idaemonplasmo 7 жыл бұрын

mr color super clear III. working perfectly.

@reefta 5 жыл бұрын

can someone tell me what products is being used at 6:32 and 6:16?

@alessandrofavaro7722 5 жыл бұрын

The one at 6:16 should be tamyia extra thin cement

@llaahhvaacc 8 жыл бұрын

Zdarec.Ty rozvody hadic a kabelu v podvozkovich sachtach jsi delal jen tak dle oka,nebo presne dle nejakeho schema?Jinak opet excelentni prace,klobouk dolu:-)

@idaemonplasmo 8 жыл бұрын

+Milan Ježek Hlavně podle fotek. Někdy se kouknu i na obrázky kolegů a někdy popustím uzdu fantazii. Hlavně pumovnice byla hodně chudá a pár blbých drátku to pěkné oživí.

@llaahhvaacc 8 жыл бұрын

+PLASMO - plastic models jj vypadá to dost dobre

@dickscratcher3040 6 жыл бұрын

Great vid , but I had to turn off the sound . sorry .

@aforce66 9 жыл бұрын

This kit is the exact same one by Orange Models that was built by ScaleModelAircraft. I guess it doesnt matter though

@onodirobert 8 жыл бұрын

Hi! With what did you fix the toothpick to it (2:35)? Thanks!

@idaemonplasmo 8 жыл бұрын

+Róbert Ónodi I held seat to toothpick with Kores GUMFIX

@onodirobert 8 жыл бұрын

+PLASMO - plastic models Thanks for your answer :)

@arandomf-14tomcat77 7 жыл бұрын

PLASMO - plastic models Those peices are blown away from your modelling skills lol and its a joke

@ethan5354 8 жыл бұрын

How much was this kit? I cannot find it in my local hobby shop. It looks like a very interesting kit. I would expect an Academy kit of this level to be upwards of $50.00.

@rurushu8094 7 жыл бұрын

Ethan Ton The Italeri one is great, it only costs around 15-24 USD

@user-xs1we6gu4p 7 жыл бұрын

Ethan Ton about 20?usd

@christopherhunt7412 7 жыл бұрын

Ethan Ton I've seen this one for around 20 GBP, and the italeri for the same price.

@cptalbator9547 8 жыл бұрын

Its strange but i tried to do the same thing like you with the panel Line but when i Go to clean with thinner i erase everything

@idaemonplasmo 8 жыл бұрын

Did you use acrylic colour and covered it with clear varnish? If you used Tamiya x-20 thinner for wiping wash off, then everything should be fine.

@cptalbator9547 8 жыл бұрын

+PLASMO - plastic models yes but i saw m'y problem and it was by my mouvement when i apply the thinner and the pression i put to the model i think n'est Time Will be fine

@rurushu8094 8 жыл бұрын

+PLASMO - plastic models I have an Italeri/Tamiya F-35A. Are there any noticeable differences between the two?

@jefi._damier 8 жыл бұрын

what glue is good for model kit. revell or tamiya

@idaemonplasmo 8 жыл бұрын

+mr.jeffey inpen Both are good.

@jefi._damier 8 жыл бұрын

thank

@typehere6689 7 жыл бұрын

Mr.Jeffey 2486: Bandai. Compared to others, the quality of most of their newer offerings is insane.

@user-ep6bp8ef8x 9 жыл бұрын

Shin F35 comes out to online of battle feeding 4 with an F35 steles fighter. It is the fighter which it is easy to operate. Please try production hard

@flo9909 6 жыл бұрын

WOOW

@fstar1467 8 жыл бұрын

@user-my2qx6dr3v 6 жыл бұрын

A-10

@llaahhvaacc 8 жыл бұрын

Jo a ještě dotaz,jak dlouho uz modelaříš?

@idaemonplasmo 8 жыл бұрын

+Milan Ježek Asi 8 let, ale dlouho jsem modely spíše patlal než lepil.

@llaahhvaacc 8 жыл бұрын

noo,mas asi hold talent,ve tvejch videjich se clovek ledas cemu priuci,a alespon to do budoucna usetri a zprijemni prace pri stavbach a je to pak hned zas prijemnejsi si stavby uzit,a ne se u nekterych veci trapit.

@600rolsto600 9 жыл бұрын

naco sluzi ta zlta "plastelina" ?

@600rolsto600 9 жыл бұрын

***** Nazdar , dikes za odpoved. Ja som najskor hladal tu epoxi plastelinu z tvojho tutorialu v ktorom sa zmienujes o tmeloch, tu som ale tuto v Nemecku vobec nenasiel. Ale green stuf som v pohode nasiel aj na ebay, cize dikes. Chcem sa spytat ci nemas v plane tutorial o prerivani modelu?

@maciejcichowski4301 7 жыл бұрын

Do you use some special holder for brushes? I'm talking about that wooden 'thing' on the brush.

@idaemonplasmo 7 жыл бұрын

The "wooden think" is cheap Tamiya standard brush small. hobbyking.com/media/catalog/product/cache/7/small_image/367x337/9df78eab33525d08d6e5fb8d27136e95/legacy/catalog/47959.jpg

@maciejcichowski4301 7 жыл бұрын

Thank you, i really admire your models and your skills.

@SereBronx 8 жыл бұрын

Do you know how this f-35 mades. I suppose no. First aircraft with vertical landings was Russian and this f-35 was made with help of Russians, because this plane and russian plane yak-141 looks very simular

@idaemonplasmo 8 жыл бұрын

+Джокер Иванов Still f-35 is very expensive toy. First project with vertical take off was made by Germans ww2. For me , best successful project V/STOL is British Harrier. Sorry Russian and American patriots :-D

@rurushu8094 7 жыл бұрын

Джокер Иванов The Yak-141 looks nothing like the F-35. But I believe that Yakolev did sell the design of the lift fan to Lockheed Martin.

@user-du2nt1mi5r 4 жыл бұрын

Ambiguous aircraft, someone praises him very much, someone says that this is a failure of aviation thought, but the main thing I liked is your work and the beauty of the aircraft.

@TheFulcrum2010 7 жыл бұрын

Nothing to do with the build or the builder but the kit itself. If you up-scaled it to 1 to 1 then the panels would stand that far proud of the body it would look ridiculous. Look at photos of the real thing and you will notice the lines but none standing proud. If they did whats the point of stealth.

@rurushu8094 7 жыл бұрын

TheFulcrum2010 Due to the properties of polystyrene and the limits of modern cutting technology, creating true 1:72 scale panel lines is impossible.

@supercededman 11 ай бұрын

@@rurushu8094spot on. Pedantic twats :-(

@kevinma4571 8 жыл бұрын

is academy a good brand?

@idaemonplasmo 8 жыл бұрын

+Asuna Yes it is. But only new kits.

@kevinma4571 8 жыл бұрын

+PLASMO - plastic models thanks

@MrBioniclefan1 8 жыл бұрын

+Asuna and if you can get past the lack of paint colors you need it doesn't say on the box.

@kevinma4571 8 жыл бұрын

+Gahlok12 what no paint? -^-

@MrBioniclefan1 8 жыл бұрын

+Asuna yeah you have to guess what paints are needed I know and the paint guide is useless as well.

@robertjensen1438 3 жыл бұрын

Just a comment for the algorithm

@egmccann 7 жыл бұрын

I don't know why I'd not thought of - I'm assuming that's something like epoxy putty - for seat belts before. Tape, yes (with varying results.) Putty, not so much. I'll have to remember that.

@junebrown3304 5 жыл бұрын

Big Pp

@tdfisk 8 жыл бұрын

I'd rather hear a narration of what you're doing instead of the music and the supplies you use. Just watching someone build a kit is kinda like watching paint dry. I have this kit and after looking it over I could see it only looks plain. There are so many great opportunities for detailing. You are using some, but I have no idea of what exactly you're doing. I think you have a lot to offer for new model builders and those like me who has a lot of experience and also have disabilities. Well, it's just a suggestion and I hope you consider it. Thomas

@rurushu8094 8 жыл бұрын

I thought it was quite entertaining

@idaemonplasmo 8 жыл бұрын

It is not tutorial just step by step build. I do not want to explain same things again and again, for this purpose I have great guide series. kzfaq.info/sun/PL4CTPuZfjAPtEaCHrNWxTkgtVtBCBd8OZ

@fastfowler 7 жыл бұрын

personally I like it just the music

@rurushu8094 7 жыл бұрын

td fisk I prefer this style for the one with narration