F150 Rough Country 4" to 6" Lift Kit Conversion 1992 Bronco

Рет қаралды 71,156

8 жыл бұрын

Getting 2 more inches out of the kit in the front of the truck to level it out. To see the original installation search "F150 4 Inch Suspension Lift Kit Install 1992 Rough Country"

Пікірлер: 59

@TheJohndeere212 11 ай бұрын

I have a 6" lift on my 1986 Ford F150 4x4. It works great and looks great too.

@bradlfsh 4 жыл бұрын

I like the video short and to the point video, and still as informative as you need

@davidfrank2824 4 жыл бұрын

I have the same identical truck to yours. I have the same issue that the rear of the truck is sitting much higher. Since I've owned it since it was new I know the complete history of it. I have never touched the springs on the rear at all. only thing I have ever done to the rear end was to install air shocks. When I am towing my boat is when I put the most are in. As soon as we come home and I disconnect I dropped the air pressure. Over the last 6 years it just seems like the back has gotten higher. Depending on what sort of winter we have this year my plan is to take the whole truck apart and replace everything. This has absolutely been my favorite truck I have ever owned. I just cannot justify spending anywhere from fifty to eighty thousand dollars to buy a new truck when my big girl still has a lot left in her. Now if I had the inline-6 engine I think she would have been gone a long time ago lol. I'm fortunate enough to have the 5.0 and I know everything about that motor. I have had several mustangs with the same motor. I have a lot of experience with them. Thank you for sharing your video.

@ihopness1668 2 жыл бұрын

Those 300 sixes are some of the best engines ever produced.

@joejoe7814 7 жыл бұрын

nice truck looks nice

@efrainjuarez6057 Жыл бұрын

Thanks for this videos no wonder my truck 4 inch lift looked like that ima have to put a 6 inch in front and 4 in the back

@butterycoloredman5776 8 жыл бұрын

Good vid!

@paulmallet7899 5 жыл бұрын

How tall is your truck with the 33's and the 6 inch lift? Is it taller than 80" ? Thank you

@kylemoody4017 7 жыл бұрын

what size tires do u have on there

@ericzinaman2918 6 жыл бұрын

I also have that issue where my coil spring is rubbing my front shock , I'm at a lost did you figure out how to solve that issue?

@adamkohn2610 6 жыл бұрын

What wheels and tires did you put on the truck and how big are they

@nauidiver227 7 ай бұрын

You messed up I have a 4inch rc lift kit and all I did was add a coil spacer to the front 😂. Perfectly level

@Mudslinger3 5 жыл бұрын

If I'm lifting shame ford chassis 6 inch with coil spring do I need a 2nd strut

@edwardkesock216 5 жыл бұрын

Looks alot better that the 4inch just my 2 cents but your truck looks way better buddy looks mean looked good before but way better now great job i got a 91 f150 with a 4.9 straight 6 i think iam going to go 4 just because its got the 6 banger in it if it had a v8 i would probably go 6 o dont know iam undecided your truck looked so good and i haven't spent any money yeti can get them both for about the sam the 6 inch for about 175.00 more and thats not alot more for a big change

@primitiveslow-mo8714 5 жыл бұрын

keep us updated. i just got a 92 f150. 105,000 miles. replaced the stock shocks, tires, oil press switch, full tune up, head gasket. i have a little blow by with the oil vent line to the filt. but that will be in good time.

@YFZstoner Жыл бұрын

Hey what is the length of your 6" spring I had paid for the 6" they sent a 4" kit so they sent me new 6" springs but they are both 20.5"

@metothesun1 8 жыл бұрын

what size shock is the front longest shock PLEASE TELL ME!!

@Edgar420SK 7 жыл бұрын

Thanks for the info. Bro replace the passenger fender. lol

@LuisMartinez-ux5kt Жыл бұрын

Hey man I was wondering what the part number is for the front springs had the same problem where my springs are 4in. I would like to know the part number for the 6in springs in the front

@levijones1874 5 жыл бұрын

2:15 I was wonder what the hell was laying in my driveway

@LouRock 7 жыл бұрын

I watch all these videos this one if possible would get two like thumbs from me. This video had more detail then most. You get my sub and a like !!!!!!!

@chandlersell8625 6 жыл бұрын

What size are the tires

@montycash 6 жыл бұрын

hey i have the same year truck more of a shitter but im about to fix it up a bit lift kit like this and wheels and tires can you give me some info on the rims and tires i want the same exact type thanks sweet truck

@tommcall2654 5 жыл бұрын

4:47 millerpark way?

@brandoncotton8550 4 жыл бұрын

Just installed the 6” on mine maybe you could help me out installed spring cupped washer doesn’t touch spring should it?

@Oldsmob455 4 жыл бұрын

Not sure without seeing it.

@grantlandneil 7 жыл бұрын

Are you going to address the rust issue underneath? Maybe use a rust converter and some black spray paint

@Oldsmob455 7 жыл бұрын

The truck is too far gone. Rust in peace.

@troydesanti781 5 жыл бұрын

I have a 89 f150 2wd truck and I'm about to do my lift kit from the same people what did you do about the sway bar in the rear end

@Oldsmob455 5 жыл бұрын

My intention was to extend the links to it(custom weld job). I never got around to it.

@troydesanti781 5 жыл бұрын

@@Oldsmob455 Aw okay and I'm also not sure if I have a sway bar because it 2wd

@bradlfsh 4 жыл бұрын

I'm late to this video lol but my experience with lifting cherokees is I couldnt tell a difference just leaving the rear sway bar off.

@Wildkid1997 6 жыл бұрын

Did it mess up your alignment converting from 4 to 6

@DubstepMagiic 4 жыл бұрын

Usually amy lift kit requires an alignment afterwards

@croneous 8 жыл бұрын

do you need the rubber boots on the shock?

@richfoltz3868 7 жыл бұрын

Gregg Lange no you don't it's just a look

@fsb_-bf3th 4 жыл бұрын

@@richfoltz3868 doesn't it keep debris out?

@kayotic14 8 жыл бұрын

Do you think I should replace brake lines on my 1990 ford bronco I want to put a 6 inch lift on it

@Oldsmob455 8 жыл бұрын

With this kit the longer brake lines are mandatory with the 6" front lift..

@kayotic14 8 жыл бұрын

+Oldsmob455 and you know the 1st video you added both blocks your supposed to take out the original block and put the new block in

@Oldsmob455 8 жыл бұрын

negative, you need that block for a suspension stop.

@kayotic14 8 жыл бұрын

+Oldsmob455 how the leaf spring should sit on 1 block not 2

@kayotic14 8 жыл бұрын

hey i ordered my 6 inch lift RC for my 1990 ford bronco and idk why i am missing coil springs and radius arm brackets and how many boxes did you get i got two and mine is coming with extra leaf springs can you make a video how to add the leaf or is it simple just wondering need your help

@montanawhite5699 5 жыл бұрын

Put stuff in the bed, it will level out. That’s what the bed is for

@matthewmcdonald140 2 жыл бұрын

I mean it worked for my 98 Ram its sitting on a 3-inch suspension lift and I need new front springs to level it because the addition of my ranch hand bumper has the front sagged lower than the rear but for now about 450 pounds in the bed has it leveled until this spring.