F4A51-2 Reassemble

Рет қаралды 11,750

2 жыл бұрын

1999 Mitsubishi Diamante
PATREON: / curmudgeontransmission
Supplier Links:
Superior: superiortransmission.com/
Transtar: www.transtar1.com/
WIT: www.wittrans.com/
Sonnax: www.sonnax.com/
Teckpak/Fitzall: www.teckpak-fitzall.com/
Transgo: transgo.com/
Precision of New Hampton: gopnh.com/
Atec Transtool: www.toolsource.com/atec-trans...
ATSG: atsg.com/
ATRA: www.atra.com/
Fatsco: www.fatsco.net/online-store
Jaggi"s: www.jaggiimport.com/home.html
Slauson's: www.slauson-transmissionparts...
Standard Transmission & Gear: standardtransmission.com/
Wade's: www.wadetransmission.com/parts/
Bishop's: www.bishopengine.com/

Пікірлер: 27

@yosoydpfknr2855 Жыл бұрын

This video is a big help thank you

@CurmudgeonTransmission Жыл бұрын

Glad it helped. Thanks for watching.

@cloudus.suryel 2 ай бұрын

Thanks for this. I have plans to learn how to reassemble one of these for my 2003 Mitsubishi Eclipse. I will be taking an Auto transmissions course in school. What is that blue grease being used? Im still new to transmissions

@CurmudgeonTransmission 2 ай бұрын

It is assembly gel made specifically for transmissions. Comes in three thicknesses. Red, blue and green (thickest). Made by Dr. Tranny (Lubegard).

@hermanjones4124 Жыл бұрын

HELLO I FOUND YOUR VEDIO TO BE VERY INFORMAL AND USEFUL I REBUILT MY F4A42 TRANSMISSION INSTALLED IT BACK IN CAR BUT IS NOT RIGHT WHEN I PUT IT IN DRIVE IT DOES NOT TAKE OFF WITH OUT PRESSING GAS AND WHEN IT DOES IT LIKE PRESSING THE GAS AND BREAK AT THE SAME TIME REVERSE IS GREAT. DO YOU HAVE ANY SUGESTIONS I WILL GREATLY BE THANKFUL.

@CurmudgeonTransmission Жыл бұрын

Either it is misassembled or there is a problem in the valve body. Sounds like you have 2 elements applied at the same time.

@mechanickitten 5 ай бұрын

Thanks alot for the great video, I'm from Australia and recently rebuilt my W5F51 transmission (the five speed variant of F5A51) but the transmission has two problems after rebuild 1. When I put it in drive the car moves but won't change gears just goes forward at walking speed. It won't up shift at all. 2. When putting in reverse it Jerks Violently! I replaced the easy stuff like speed sensors etc and checked the fluid level, but no have worked. What a possible cause would be? Thanks in advance 🙏🏻

@CurmudgeonTransmission 5 ай бұрын

Sounds like it is in failsafe mode. Need to know what the codes are that are stored in the computer.

@mechanickitten 5 ай бұрын

@@CurmudgeonTransmission it's a Mitsubishi Verada (Diamante) and uses very rare MUT II system, I have a complex OBD 2 scanner but can't read transmission codes on her

@Jotmanv Ай бұрын

The solid ring that u installed in the minute 19:36, is replacing the wave spring, where u get the solid spring? how I can look for it?

@CurmudgeonTransmission Ай бұрын

WIT or Transtar, links are in the description.

@CurmudgeonTransmission Ай бұрын

Found them on Ebay also. There are 2 different sizes so measure yours to make sure you get the right one.

@user-zi9ec4bd8w 2 жыл бұрын

I don't think there's a trans out there you haven't worked on. Do you have any experience on CVT's? Thanks.

@CurmudgeonTransmission 2 жыл бұрын

I've done a few. Mostly Nissans.

@jorgeluisreyes7580 Жыл бұрын

Buenas amigo tengo una tramicion F4A42 coje reversa y no asia delante los discos estan buenos q me recomiendas

@CurmudgeonTransmission Жыл бұрын

Sorry I don't understand the question. This did not come out well in the translator.

@crossingkey4978 Жыл бұрын

Would I be able to do this without a press?

@CurmudgeonTransmission Жыл бұрын

You could use a piece of all thread and nuts. Then you would have to get creative with stuff to use to compress the pistons, but yes, I would say you could.

@crossingkey4978 Жыл бұрын

Ok great thanks I'm going to b doing this soon unless I pull it apart and it's totally destroyed hahaha

@crossingkey4978 Жыл бұрын

I've done c4 s but this looks to b a little more complicated

@CurmudgeonTransmission Жыл бұрын

Not too much more. Just pay attention to where each snap ring is and the steel plates. Some are special and need to be oriented properly. Any questions don't hesitate.

@crossingkey4978 Жыл бұрын

Ok I really appreciate it I'm going to buy a manual for it and Ill probably take u up on that thank you

@mayan34956 Жыл бұрын

The solenoids are all 5 identical?

@christiancarrera6780 Жыл бұрын

Mark the solenoids (numbers, letter) is the best way to say time and no make mistakes if you dont have information of the solenoids

@CurmudgeonTransmission Жыл бұрын

Christian Carrera is correct in that you should get in the habit of marking your solenoids before taking them off. So many transmission nowadays it will get you into real trouble if you get them mixed up. This one however the solenoids are all the same. If you have a code you can swap them and see if the code changes.

@mayan34956 Жыл бұрын

Thank you for that information. Yeah I wanted to know if they were all the same. My car threw a code p1751. It's in limp mode. I haven't figured it out yet

@CurmudgeonTransmission Жыл бұрын

That is a code for the relay. It is located next to the computer under the center console, under the radio.