Star Destroyer - Star Wars, STL for 3D printing

No video

Star Destroyer - Star Wars, STL for 3D printing

Рет қаралды 188,447

Күн бұрын

FREE STL- fab365.net/ite...
Star Destroyer is one of the most voted requests. That's why we have to make it first, but as you all know well, there are too many details to create the Star Destroyer. That's why it takes a lot of work time to express them. It took a long time to prepare for this long work time, and it was finally possible to make it.
The star destroyer I created this time will be sure to impress those around you with its numerous details.
I designed this Star Destroyer using the same approach as my previous Millennium Falcon design. So it's very easy to make.
caution
1. Be sure to remove the support of Hull C left and right parts.
2. The booster on the back is marked with upward and downward directions, so please check and attach it.
3. The location of the main engine deflector has been marked, so please check and attach it.
Please check the video for detailed production process.
It's late, but I'm very happy to answer your request. I hope you enjoy printing the Star destroyer that I put my all into.
I am designing a display stand for an exhibition, so please look forward to it.
1 : 4500 scale
Largest part in printing, Size = X 163mm, Y 168mm, Z 62mm,
After full assembly Size= X 238mm, Y 362mm, Z 114mm
Total Build Time : 112h / Plastic Weight : 516g

Пікірлер: 235

@TKTrooper 9 ай бұрын

I can’t begin to imagine the thought and planning that had to go into the creating of this model. But then add in the detail you have managed to incorporate into it with the windows, panels and such is truly one hell of an achievement. Not to dismiss the size of this model, which is considerable large than your average models. Truly excelled yourself with this one. This is not a criticism by any means, but I think a stand is a must for a model like this. As others have suggested the ability to add LEDs would be amazing, how lever than would involve another level of planning if even possible with your style of model. But once again, Outstanding sir, bravo!

@afterglow-podcast 3 ай бұрын

Very nice! I'd love to see some Star Trek stuff in the future, really enjoying the Star Wars builds as well!

@fab365_official 3 ай бұрын

If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests

@chopper2429 5 ай бұрын

Those first cracks at the very beginning are SO satisfying.

@mikesbasement6954 2 ай бұрын

Outstanding model! I just downloaded and will begin printing in a couple of days. Thanks!

@richard-hawley 9 ай бұрын

That is amazingly well designed, the assembly alone was a joy to see. Bravo sir, bravo.

@fab365_official 9 ай бұрын

Thank you for watching and comment!!! Please enjoy~

@D4vi9 9 ай бұрын

😲 Currently printing the Millenium Falcon.. Now I know what is next!! Thanks for the work!!

@glenday7217 3 ай бұрын

Just finished printing this on my CR6 Max. No problem fitting multiple parts together on the bed and left to print. Easy to follow video while putting together. Now I need to start the print for the stand. Thanks!

@RenaTamer1 9 ай бұрын

Oh god, out of all the prints, I want this one... made out of glow-in-the-dark filament!

@ripmax333 9 ай бұрын

If you can add an option for some LED lights it would be epic!

@samthompson2980 8 ай бұрын

Agreed 😊 and a final shot of a painted one! ❤ AWESOME work.

@mikeburton8878 8 ай бұрын

Take a pin vise and drill out some windows.

@raven19702003 9 ай бұрын

wow awesome job .... just downloaded it now to dial in my settings :)

@fab365_official 9 ай бұрын

Thanks! I hope you get good result~

@destinyangel5 9 ай бұрын

Amazing , back in 1977 the Star Wars studio prop builders could only dream of this main stream tech of 2020's as they had to search through the hundreds of Tamiya kits .

@darthkek1953 9 ай бұрын

Honestly it probably helped creativity to have to do that.

@lonniesides9302 6 ай бұрын

The detail is incredible

@fab365_official 6 ай бұрын

Thank you! Please enjoy m details.

@PaulB-justme 9 ай бұрын

What a fantastic model! All it needs to finish it off is a tiny Millennium Falcon to glue to the side of the bridge (as from "Empire Strikes Back"! 😃

@realdan3d 9 ай бұрын

Another amazing model! ;) Going straight to the basket!

@fab365_official 9 ай бұрын

Please enjoy to print~

@TheSirBlackbird 9 ай бұрын

Ce Star Destroyer est magnifique comme tous vos modéles. ;)

@Anon4994 9 ай бұрын

Totally amazing!! What Star Wars vehicles next? A Sandcrawler or a Sail Barge may be???? 🤔

@frankmmiii 8 ай бұрын

BEAUTIFULLY DONE!

@fab365_official 6 ай бұрын

Thank you! Please enjoy~

@pixisdesigns761 9 ай бұрын

Amazing attention to detail!

@fab365_official 9 ай бұрын

Thanks for watching and comment~

@eltiodemo 9 ай бұрын

You (or yours) is a genius, congratulations my friend, greetings from Argentina!!

@TastierBackInThe80s 9 ай бұрын

Well done. The way the parts interlock at various points, very well done!

@98f5 7 ай бұрын

Im printing this scaled up for my 600mm volume machine lol. Itll be almost 2 meters long. Gonna hang it in my garage. Will share some pics on maker world when it finishes

@fab365_official 5 ай бұрын

Please share on my review page. fab365.net/reviews thanks~

@98f5 5 ай бұрын

@fab365_official a month later ive got about half the parts printed. Ill definitely share. I shared my xwing and the 3mf on your comments section there too. Thanks for your awesome website!

@mebenn15 9 ай бұрын

WOW, just wow, I can't wait to buy this file and print out a small fleet.

@fab365_official 9 ай бұрын

Thank you~ Please enjoy~~~ You will like~

@rayhi5918 9 ай бұрын

It's free on their website.

@mebenn15 9 ай бұрын

@@rayhi5918 when u first sign up to his site, you get 1 free download. Afterwards u pay. I'm subbed to him already

@MrDonovanbedford 9 ай бұрын

WOW!!! Just WOW...

@fab365_official 9 ай бұрын

Thanks for watching and comment!!! Please enjoy~

@SkinnyTrini04 9 ай бұрын

I've printed the Razor Crest and AT-AT. I can't wait to print this one 🍺

@raffia16thblaze10 9 ай бұрын

yeah im most definitely modding mine for resin printing so i can eliminate all gaps and get a really lovely painted model.

@presidentskroob522 9 ай бұрын

This is amazing! Im going to make a pink one

@fab365_official 9 ай бұрын

Pink???😅

@voltran86 7 ай бұрын

massive work!

@fab365_official 7 ай бұрын

Thanks for watching! Please enjoy~

@OaMaaM1775 9 ай бұрын

Amazing work.

@fab365_official 9 ай бұрын

Thanks for watching! Please enjoy~

@legiomortis8043 9 ай бұрын

Wtf! Wow amazing work dude, subscribed 👏👏

@fab365_official 9 ай бұрын

Wow! Thanks for subscribing! Please enjoy my videos!

@benbot5173 9 ай бұрын

Well now I know what I’d try making if I had a 3D printer XD awesome work!

@hassanlichtel2407 9 ай бұрын

Damn!!! THIS ist your f*** masterpiece!❤

@fab365_official 9 ай бұрын

😅😅😅 Thanks for watching and tough comment!!! But please enjoy smoothly~ 😝

@red6151 9 ай бұрын

Mis felicitaciones por el diseño, es francamente espectacular. Un trabajo brillante.

@fab365_official 9 ай бұрын

Thanks for watching and comment. Please enjoy~

@ohcrazydiamond 9 ай бұрын

Amazing job congrats!

@fab365_official 9 ай бұрын

Thank you very much! Please enjoy~

@somewhereinagalaxyfarfaraway 9 ай бұрын

I can only dream of being able to print such things when I get one to do it

@h45e 9 ай бұрын

Led lights would be amazing

@dc37009 8 ай бұрын

FYI, Early models had individual fiber optic threads laboriously fitted to the interior, later it was deemed more efficient to drill out the lit areas, and use an interior bulb as a bank light source ! ~liked ~subed ; )

@primejee 8 ай бұрын

Oh My God!!! 멋지기도 하고 정말 커서 웅장합니다.

@fab365_official 7 ай бұрын

지돌파워님, 감사합니다~ ^^

@user-ls2lo1ps9b 9 ай бұрын

엄청난 작품이네요!!!

@fab365_official 9 ай бұрын

감사합니다~ 다른 영상도 시청해주시면 더 감사하겠습니다~ ^^

@davepastern 9 ай бұрын

pretty nice quality! Looks larger than 1/4500 scale to my eyes.

@henrysanchez4810 9 ай бұрын

Love it, it's a big one.

@fab365_official 9 ай бұрын

Thanks for watching~ Please enjoy big one~

@conduct623 9 ай бұрын

That was Awesome.

@fab365_official 9 ай бұрын

Thanks for watching and comment! Please enjoy~

@ascensionindustries9631 9 ай бұрын

Bravo. Well done sir. Doo want!

@goforitpainting 8 ай бұрын

Really cool. 👍

@fab365_official 6 ай бұрын

Thanks for watching! Please enjoy~

@MegaPointman 9 ай бұрын

Awesome Man!

@fab365_official 9 ай бұрын

Thank you for watching and comment! Please enjoy~

@AOtarolaR 4 ай бұрын

I am making mine with a silver filament! can´t wait...! (what kind of glue are you using on the video?)

@PlasmaPhi 9 ай бұрын

We need the Star Forge next!

@fab365_official 9 ай бұрын

Could you ask or vote on my request page please? fab365.net/requests Thank you~

@mavericktrinidad9242 9 ай бұрын

Finally my favorite pizza shaped space ship

@hterra2706 8 ай бұрын

Free STL's? Subscribed!

@fab365_official 8 ай бұрын

Yes. Please enjoy~

@ozriderone 9 ай бұрын

I love this! Just wondering what filament was used? I've been after a grey in that shade for ages.

@fab365_official 9 ай бұрын

I used right grey PLA.

@danholzer4626 9 ай бұрын

how in the hell do you do it!? Very minimal layer lines and stringing! beautiful and amazing!

@chrisjones1798 7 ай бұрын

All I can think to say is outfuckinstanding workmanship 👏👏👏👏👏👏👏👏👏👏👏

@fab365_official 7 ай бұрын

😅😅😅

@Flecoide 9 ай бұрын

es increíble! felicitaciones!

@fab365_official 9 ай бұрын

Thanks for watching and comment~

@tonbopro 9 ай бұрын

Amazing

@fab365_official 9 ай бұрын

Thank you! Cheers!

@justinrhoads2199 Ай бұрын

@Fab365 I tried using Silk filament and it kinda came out crappy. So what filament did you use for yours? Cuz your Star Destroyer came out amazing in your video.

@hakunamatata324 9 ай бұрын

No stand?? Opportunity missed 😢 Solid work, thanks for making it available.

@fab365_official 9 ай бұрын

Stand is coming soon!

@Debunked421 5 ай бұрын

I mean has anyone talked about how dialed in that printer is? I been printing a long time and this has to be one of the best looking print jobs I have seen.

@bradleyj.fortner2203 29 күн бұрын

This is a little out of left field. But, hear me out. I own a 1973 Honda motorcycle. On it's sides, it has two plastic covers to hide the battery and air filter. They're painted the same color as the gas tank and lots of old bikes had them. The ones for my bike are getting really hard to find. Even used. If you can figure out how to print plastic motorcycle parts, you could make a small fortune. Even the dirty, scuffed and cracked ones are pulling in approximately $80 bucks each.

@AntiKipKay 9 ай бұрын

It's free?? Oh man so gonna make one. I'll add holes and extra cavities to install lights and fiberoptics.

@fab365_official 9 ай бұрын

I expect your lights installing work. Please enjoy~

@rvalius 9 ай бұрын

Очень круто получилось.

@fab365_official 9 ай бұрын

Thanks~ 😁😁😁

@jamesamy1963 7 ай бұрын

Love the model the only thing I don't like that can be done differently and this is with all printed models is the guns along the side they need to be actual turrets not a print

@312Forrest 9 ай бұрын

Beautiful model. What are its dimensions after assembly?

@fab365_official 9 ай бұрын

After full assembly Size= X 238mm, Y 362mm, Z 114mm For more information, Please check item link.

@312Forrest 9 ай бұрын

@@fab365_official Thx

@jasoncombs3232 9 ай бұрын

RING THAT BELL BOYS!!!

@fab365_official 9 ай бұрын

😁😁😁

@danbrown586 9 ай бұрын

The detail and the assembly process are both impressive. What was the adhesive you were using?

@distractedgeek 7 ай бұрын

He uses brush Loctite super glue.

@TheNeilmcintyre 9 ай бұрын

Looks amazing! Can the prints be scaled in slicer easily? If the build plat is 230, how big could this be printed?

@dhmsimons 8 ай бұрын

wonderful work.. what material did you use? PLA? ABS?

@fab365_official 8 ай бұрын

I use PLA. Always.

@SkinnyTrini04 9 ай бұрын

Amazing. What's the length of it? Whatever it is, must....print....BIGGER

@JuergenHoppe1 9 ай бұрын

That's the first thing I looked: how big can I scale it on my printer. 😁

@patricks7982 8 ай бұрын

Very nice job ; What glue are you using ? Thanks a lot

@fab365_official 8 ай бұрын

I use this glue. www.shop.fab365.net/loctite

@TheRealStructurer 9 ай бұрын

Nice model but hard to grasp the size. How big is it? How did you design it? Thanks for sharing 👍🏼

@flenner 9 ай бұрын

Your hand shake tilt my brain

@TernaryTrout 9 ай бұрын

What kind of glue do you use when it's needed ? Is it just normal Cyano-Acrylate superglue ?

@ResurrectedBrush 9 ай бұрын

How in the heck is that printed so clean?? I'm not seeing layer lines and the details look crispy enough to be resin! Are optimal settings included with the STL files?

@fab365_official 9 ай бұрын

I wrote on setting that linked page. Please check~

@rbnzdave 8 ай бұрын

its at 0.1mm. and theres so much detail it masks a lot of it.

@TheSilverwolf97 9 ай бұрын

This looks amazing. Which material is best to print it and not lose the detailing ?

@fab365_official 9 ай бұрын

Light grey is good for this design.

@eddiexx 9 ай бұрын

Great Thanks Fab! Is there a possibility you could share the actual workfile obj or so? So we could add details but still use this as a base? it would be truly fantastic. Cheers

@user-ee6kj3rn9w 9 ай бұрын

Awesome model and print ! I love the filament used, what is the brand and color ? thank you

@fab365_official 9 ай бұрын

I used right grey from colorfabb.

@user-ee6kj3rn9w 9 ай бұрын

Thank you 👍

@ryankorte8601 8 ай бұрын

Very cool! But no supports needed?? I saw very few to trim off.

@fab365_official 8 ай бұрын

No supports needed. Please enjoy~

@ConnorGray 5 ай бұрын

what printer is this and what is the material? Looks fantastic

@fab365_official 5 ай бұрын

I used various printers, like Prusa MK3, MK4, Ender 3 S1, etc...

@justinrhoads2199 Ай бұрын

@fab365_official I tried using Silk filament and it kinda came out crappy. So what filament did you use for yours? Cuz your Star Destroyer came out amazing in your video.

@alexandrucore 5 ай бұрын

Amazing design ! one question what type of glue do you use ? :)

@fab365_official 5 ай бұрын

Thanks~ I use this glue. www.shop.fab365.net/loctite

@robertlemoux1263 7 ай бұрын

Amazing!!!! What is the reference of the glue please?

@fab365_official 7 ай бұрын

I use this glue~ www.shop.fab365.net/loctite

@robertlemoux1263 7 ай бұрын

@@fab365_official Thanks

@jamesamy1963 4 ай бұрын

are you going to do a Battlestar, Babylon 5 or stargate ships?

@junlee8173 9 ай бұрын

nice

@fab365_official 9 ай бұрын

Thanks! Please enjoy~

@homelander1974 9 ай бұрын

뽑아보고 싶은데 여력이 안되네요...ㅠ.ㅠ 멋진 작품 잘 보고 갑니다~

@fab365_official 9 ай бұрын

웬만한 3D 프린터에서는 대부분 프린트할 수 있도록 디자인했습니다. ^^

@dankron_ 9 ай бұрын

Thats incredible! What colour filament is that?

@fab365_official 9 ай бұрын

Thank you~ I used right grey pla filament.

@Kycirion 9 ай бұрын

I have a rager right now.

@leegoodman11 4 ай бұрын

Apologies in advance if this is a dumb question. I'm new to 3d printing and was wondering, can this be printed on a resin 3d printer or is it just for filament ??

@piotrmaslak2617 9 ай бұрын

Wow 🖖🖖🖖

@fab365_official 9 ай бұрын

😆😆😆

@tomsedragon 9 ай бұрын

wow.. just wow :-D did you print in ABS?

@fab365_official 9 ай бұрын

I always use PLA. Thanks~

@tomsedragon 9 ай бұрын

@@fab365_official Thanks for answering. I would have thought it was ABS with all the hooks needing to be flexible.. even more impressed :-)

@wdethoma 7 ай бұрын

Hello. What instant glue did you use? Just built your model, did not come out as well. The tolerance are super tight. Managed with some sandpaper, but it is a awesome build.

@fab365_official 7 ай бұрын

I use this glue. www.shop.fab365.net/loctite Please check~

@Dragon_Werks 9 ай бұрын

Is this @ the same size as the old MPC/AMT kit? How difficult would it be to modify the design to reflect the Tector class Star Destroyer? It has no big hangar because it carries no fighters, landing craft, dropships. It also has @ double the number of guns. It's a pure battleship. I'd need separately molded gun turrets, and a LOT of them, plus extra deflector shield domes to build my modified version.

@mpw1986 8 ай бұрын

What about a space 1999 eagle?

@timstevens3361 8 ай бұрын

im a cnc machinist that took alot of effort looks great tho !

@mikezimmerman9547 4 ай бұрын

you could put light blue LEDs in the thrust nozzles with cotton ball overlays for a thrust effect? Anyone know better ways to do that?

@BlogaiOh 8 ай бұрын

Please make Mass Effect Starship!

@DarrenGerbrandt 9 ай бұрын

Very cool. Does the Locktite Super Glue haze over? I've found the superglues/crazyglues that I've tried have a nasty tendency to leave a white haze on prints and I had to switch to B-7000 glue which works great but it would be nice to be able to use a super glue at times.

@MRgrimlock84 9 ай бұрын

I have had good luck with Bob Smith Industries super gold plus super glue. It doesn't haze on clear styrene parts and I believe it's foam safe as well.

@Manuparis 9 ай бұрын

@@MRgrimlock84 is it the glue you use with the paintbrush ?

@MRgrimlock84 8 ай бұрын

@Manuparis no it comes in a standard super glue bottle. I have used old paint brushes and tooth picks to apply it though.