STL: fab365.net/ite...
This model is an upgraded version of the R2-D2 model designed by GOODesign three years ago.
Key improvements to Foldable R2D2 include:
1. We created a sturdy support on the outside to prevent the arm from shaking. We also created supports on the inside of the bottom. Now, your arm will never fall off the bed.
2. It is designed to be color-coded so that various parts can be printed and attached separately according to color. It's a bit of a hassle, but the finished product looks amazing!
Since there are many parts, there are some things to be careful about.
1. It was designed in an slanted shape to reduce the risk of incorrectly attaching parts. Checking this slope carefully will reduce incorrect attachment.
2. The arm must be pulled outward so that it can be rotated down and fixed in its original shape.
Be sure to check the video and photos for details.
Now, we hope you can enjoy a more advanced Foldable design that includes color.
Largest part in printing, size= X 98mm, Y 196mm, Z 61mm, After full assembly size= X 72mm, Y 50mm, Z 108mm
Total Build Time : 27h 40m / Plastic Weight : 120g