Fabricating A CRAZY QUAD EXIT Exhaust For My Supercharged Drift Truck! Sounds INSANE!

Рет қаралды 64,710

6 ай бұрын

Check out Manta Sleep at tinyurl.com/y35pz3m7 and make sure to use code GINGIUM for 10% off your order! In this video we build a quad exit exhaust of the Drift Truck! Well... kinda...
Mishimoto ► www.mishimoto.com/
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.com/?Click=67190 (code: GINGIUM)
CNC Plasma Table ► store.langmuirsystems.com?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25)

Пікірлер: 246

@_Gingium_ 6 ай бұрын

Check out Manta Sleep at tinyurl.com/y35pz3m7 and make sure to use code GINGIUM for 10% off your order!

@shadowsandfire 6 ай бұрын

I spent 14,000 dollars on roller shutter for the whole house for that same reason, wish I knew about this a couple of years ago

@enso3140 6 ай бұрын

for the supercharger noise and more power you should look into someone reputable that does porting on those m112s and for the silencer those are just small ports that you can block off with some jb weld or aluminum plates to increase the noise and then that thing will scream

@tripifi 6 ай бұрын

We need to boost this comment

@legogaming6585 6 ай бұрын

Commenting for boostness!!!

@knowbull5hit590 6 ай бұрын

Yes!

@slipknotic2682 6 ай бұрын

Boost applied

@Emanj1023 6 ай бұрын

Do it

@1stMrKaiser 6 ай бұрын

Gingium: Wants to quieten the exhaust. Also Gingium: Puts the tips right under his ears

@hrhagadorn 6 ай бұрын

wonder if they fact there is no back glass that might have something to do with it......

@NXT_LVL 6 ай бұрын

It'll be better than the dumps under the cab... Those just resonate against the ground. I've got side exit on my truck, no drone and you can still hold a nice normal volumed conversation at 70mph on the highway.

@_Gingium_ 6 ай бұрын

Yeah trust me it’s much better than the turndowns lol

@danielinacar 6 ай бұрын

well yeah make it quieter for everyone else but put it closer to your ears so you can hear it better

@N3RF4LIF3 6 ай бұрын

If you ever had an exhaust dump under your ass. You would understand.

@Cyberstoops 6 ай бұрын

My favorite series on YT and the only one I’ve watched the very minute the next episode comes out. Keep up the great work Caleb 🤙

@_Gingium_ 6 ай бұрын

Thank you brotha! I appreciate the support!

@slipknotic2682 6 ай бұрын

Same bro, this truck is sick.

@arijustoleikis4283 6 ай бұрын

Same

@pleasehelpbigbird6367 6 ай бұрын

Run a 1in hose off the intake pre map into the cab and you'll hear that supercharger clearly

@boostedproblems5139 6 ай бұрын

This works I can vouch for that!

@reggie1753 6 ай бұрын

I thought you found a workaround for the fuel line around the drive shaft just worries me safety wise. With that being said exhaust looks dope wish i could hear it personally

@kilometeres1962 6 ай бұрын

Yeah I noticed that, maybe the pumps didn't perform

@_Gingium_ 6 ай бұрын

Didn’t have time to make a proper workaround, but will in the future!

@reggie1753 6 ай бұрын

@@_Gingium_ noice

@thusmarshal8815 6 ай бұрын

Make a sound pass through hose that comes from the supercharger to the inside like the LFA cheap and if it doesn't work easily removable

@boostedproblems5139 6 ай бұрын

Aka the “Foster mod” it works really well!

@thusmarshal8815 6 ай бұрын

@@boostedproblems5139 you got a subscription man awesome legacy love the 4th gen currently an owner of a 3.0r spec b planing on supercharging it . Some say the 4th gen is the masterpiece of Subaru

@calebanderson1444 6 ай бұрын

Truck is turning out amazing dude. Been watching since the driveway vids. You are an inspiration to me.

@domostdrfz8200 6 ай бұрын

I’m pretty sure everyone is diggin the drift truck build. What I like about it is you’re showing me on tips to build a cage/ redo suspension setups and straight up thinking outside of the box. I have no clue if you’re into Baja trucks but if you were, bows the time to introduce a “Baja truck build” with 19-20” of travel in the front and 20-25” in the rear. If you look at the revenue and viewers on other channels, they’ve gotta be makin bank. Not a financial adviser, just want to see a Baja build from start to finish

@CalVlogz 6 ай бұрын

Mini cooper has a tube in the engine bay that lets engine noise into the passenger compartment. That could work for the supercharger noise

@_Gingium_ 6 ай бұрын

Yes, I’m considering that option if closing the silencers on the supercharger doesn’t do enough!

@younglightin5 6 ай бұрын

The initial sound of the truck got me obsessed with UZs but i do still love the sound. Hands down one of the best sounding V8s.

@SkyEatsTyler 6 ай бұрын

I absolutely love what you've done with the truck idk what your plans are for the rear but IMO I think the ass end needs to be a lil bit wider, what ever you choose I respect it cause its still a bad ass build!

@ericcrear1359 6 ай бұрын

Second. The rear track needs to be widened out. Either with wider wheel (staggered) or different offset. Otherwise super dope setup on this. My mom taught me to drive stick in one of these b2200s, red, just like this one.

@Drunken_Hamster 6 ай бұрын

Sick exhaust fix, but now you defo need to look into that lil' 1-inch sound pipe mod from the intake through the firewall under the dash.

@temio.463 6 ай бұрын

I literally drop whatever I’m doing to watch the Gingium video hahah

@MikeAnderson-uj3oo 6 ай бұрын

Take your 3 inch pipe and split it lengthwise. Decide how big you want the tip to be. 10-12 inch works nice. Cut some nice heavy sheetmetal pieces to fill the gaps and tig it in. You can end up with a 3 inch round inlet , and and a 12 inch wide oval outlet. However long you need. You want a boom tube, that will amplify your noise. No ground clearance issues, looks cool as hell. Cheap and easy to make. Just a bit of your time. I ran a custom exhaust shop for a long time. I've built all sorts of different style tail pipes for looks and sound.

@godlyname8544 6 ай бұрын

NGL The Body kit looks clean. Great work, and the whine sounds great. I cannot wait for this thing to evolve even more with more power in the future.

@evankirschenmann4653 6 ай бұрын

Totally separate from the video... but would you ever consider building a REPU? Keeps in theme with your Mazda builds, but would be totally unique and different, even in the face of KZfaq.

@_Gingium_ 6 ай бұрын

For sure! I love REPU's!

@evankirschenmann4653 6 ай бұрын

@@_Gingium_ Got to ride in one at TougeFest 2023. Gotta say, it was a super fun experience, moreso than i thought it would be. 🔥

@cwsmtlevidurov9291 6 ай бұрын

Whipple really needs to hear about this build and do a collab 🤔 their superchargers are insanely loud but they are more on the expensive side as far as i remember

@the2uzrunner 6 ай бұрын

Just finished getting some homework done, studied a lil, learned a bit, and i get to come home to a Gingium video with some of my favorite food. Life is good

@dainperrault585 6 ай бұрын

Can’t wait to see the rest of this build finished exterior and interior

@bgomusicco 6 ай бұрын

Sounds much better. Love the exhaust.

@MichaelCoolGuy86 6 ай бұрын

Thanks for the body-kit teaser at the end.

@ImInLoveWithBulla 6 ай бұрын

It’s great how social media makes it possible for someone to make a living off of a hobby. The old saying used to be, “to make a small fortune in racing, start with a large fortune”. Imagine if KZfaq existed in the days of someone like Smokey Yunick, Burt Munro or John Britten.

@EyebrowsMahoney 6 ай бұрын

This is so sick. Its been amazing to see this from start to end. I've been wanting to do something similar, but I'm living vicariously through your videos lol keep it up!

@ReignitedAuto 6 ай бұрын

New exhaust sounds great! Nice work 👏

@38tech 6 ай бұрын

Such a cool build. Love it. I remember it before, and wow what a transformation

@That.Grumpy.Scotsman 6 ай бұрын

your fab skills are on another level dude. very talented

@cashking3512 6 ай бұрын

Love the content! I'd love to see you corner balance it, and let's see the power to weight difference over stock.

@dakotajones8010 6 ай бұрын

youll probably still need another set of mufflers lol, those mishimotos are basically vibrant ultra quiets yah they're ultra quiet at idle but punch it and they open way up. Id recommend something chambered but if you want old school sound or nascar get some cherry bombs or some glass packs that might quiet her down enough for her to whine or some flowmaster chambers but thatll def kill sound great vid the truck sounds awesome

@yatajoris2857 6 ай бұрын

Would love to see you make a cowl intake, You'll then hear the supercharger. We did a cowl intake on a friends miata, more intake noise than ITBs🫡

@Jeeplee_rc 6 ай бұрын

Man this truck is rad!

@mahdialsenussi3066 6 ай бұрын

Nice work ❤️ 👍🏼

@roninvirtues8012 6 ай бұрын

Love this thing and your work 😎

@Carnerd101 6 ай бұрын

I admire your fab work & skills and how you learned by doing.

@BUDRS 6 ай бұрын

its insane how much better that sounds wow

@batto6962 6 ай бұрын

Amazing sound

@wowthtsgood 6 ай бұрын

This build is so nuts. Makes me wanna put a turbo 1UZ in my e34

@hectGamer66 6 ай бұрын

Man driftruck sounds sooooo good ❤. Can’t wait to see it all finished up

@Skiridr22 6 ай бұрын

The trans tunnel gave the interior some caractor, I like nice 👍🏾

@danb4459 6 ай бұрын

*charracktor

@atche8004 6 ай бұрын

badass!

@dontdowhatido6503 6 ай бұрын

Ngl that exhaust sounds so good. Definitely gonna do something similar with my ls swap Volvo

@cchambers032 6 ай бұрын

Love the videos caleb! Bleed that dang handbrake!

@boostedproblems5139 6 ай бұрын

If you are happy with how it sounds on the outside and just want to hear the blower in the cabin. The “Foster Mod” is what you need! You run a hose from the intake, To the cabin. make sure to tap in pre air flow meter. I did this on my Twincharged Subaru, it made a huge difference!

@-PLAYER0NE- 6 ай бұрын

This thing is so rad man i love it. I’ve always liked these old b series pickups but the problem was always the anemic engine they came with haha. Seems like that problem has been fixed

@snorresrstrnen9391 6 ай бұрын

That fuel line hanging 50mm from each exhaust: *chuckles* I'm in danger

@iamtheleuz 6 ай бұрын

Boy that thing sounds good. 👌

@400_xander 6 ай бұрын

so excited to see this project be full truck again can’t wait to see final form

@BurningRubberNz 6 ай бұрын

Can't wait for body kit and paint

@eddylaboriemaye1305 6 ай бұрын

Got me with the bed joke fr hahahaha. Great video as always, truck is looking like it's going to be my next dream car damn'. OMG it sounds so good

@cinocv 6 ай бұрын

Now it sounds a LOT better! (or at least it seems like it from the mics)

@ElDJReturn 6 ай бұрын

Came for the Volvo. Stayed for the Drift Truck. Dude, this thing is epic! TBH, I kinda heard the Superchargerer on the inside from the video, but no matter what it sounds like in real life it does sound better. I can't wait for the second video!

@liam24_ 6 ай бұрын

Yes this is exactly the exhaust I wanted it to have. Even made a comment about it

@03canadianf5 6 ай бұрын

That 1UZ sounds real friggin good

@lukefarley9368 6 ай бұрын

Once the bonnet and windows are in, if you've got a cabin filter through the firewall you'll hear it a lot more

@gokartsminibikesandmore9925 6 ай бұрын

Could always get a super charger sound tube that you drill snd tap into the intake to reroute some if the noise

@Jordan_ordan 6 ай бұрын

To hear the supercharger more, you could do like hoonigan did with the purple LS swapped e36 and run the intake to a custom air box in the dash.

@samuelibarra4467 6 ай бұрын

Hey Caleb if your looking to get boom tubes that aren't used check out dr gas they make them, so you might be able to find a pair that can work for you!

@vw_sancho95 6 ай бұрын

Gingium you really should back purge your piping! Love the videos, hopefully i can do this to my car

@Jeeplee_rc 6 ай бұрын

I legitimately have been browsing sleep masks for my girlfriend 😂 going to check em out✌️

@deliverydude7359 6 ай бұрын

Bro hopped out so fast at the end🤣

@carlosleandry12 6 ай бұрын

You could try a titanium intake tube. Also make the tube longer with a shorter filter

@ifjimre 6 ай бұрын

You could do a little tube from inside the cabin to the intake just before to maf to make it a supercharger speaker inside the truck😅

@geralrodzlife4440 6 ай бұрын

You should kept the resonator and add those mishi mufflers, sounds sick anyhow , really cool project

@ericcrear1359 6 ай бұрын

I love everything about this build; except the rear track width. It would look so much cleaner with a wider track, or better yet; wider rear wheels with a lower offset to match up with the front, and some cool flares. But maybe thats coming.

@kolfoy 6 ай бұрын

Make a tube running from the intake before the supercharger, to the firewall, ive seen someone do that and youll have both the exhaust sound and whine

@iankelley5080 6 ай бұрын

Send the blower to Stiegmeier and fill the silencer holes and pulley that thing up!

@Darkvoidproductions1 6 ай бұрын

You should install a supercharger sound tube from the intake to the cab then you'll be able to hear it batter just be sure to add a screen so it wont suck up and stuff from the cab

@jakeadams1423 6 ай бұрын

I'm not well versed but if I remember right 03-04 cobra guys and maybe the next gen gt500 guys were doing a modification to "pump" the sound into the cab through a hose I believe.

@DoraTheNinja 6 ай бұрын

Just a thought, the exhausts going under the fuel tank with no heat shielding might start to boil your fuel if you're sitting around in traffic or waiting to get on the track in line or something just a thought

@_Gingium_ 6 ай бұрын

The exhaust is actually almost 6” below the fuel tank so I don’t think it’ll be an issue!

@1993Revhead 6 ай бұрын

Needs a pop crackle tune now and some boom tube flames

@jimxiong04 6 ай бұрын

7:15 you got Double D cup size eyes lol

@ImInLoveWithBulla 6 ай бұрын

Just an idea, custom fender badges that say B4000 would be cool.. 😀

@DerangedCoconut808 6 ай бұрын

dual 45 degree bed exit for that hotwheels look.

@gannonb99 2 ай бұрын

so, some people, like to take there Eaton twin screw in there 03/04 cobras and get them ported, it helps make power and should help with the whine but I'm not sure

@SamuelFrancom-jq4kf 6 ай бұрын

From the interior shots, it sounds a little like the Matt Reeves Batmobile.

@prodzektownia 6 ай бұрын

Send that bolwer to porting and in meantime install Your IAT sensor in the right place

@LearningWithTitus 6 ай бұрын

I remember when you worked on cars in the yard lol

@JamieBainbridge 6 ай бұрын

Everybody gangsta with a loud exhaust until they drive 30 minutes and can't hear for the next 6 hours. I've done that 😅

@zevi2000 6 ай бұрын

Rear window might help reduce exhaust noise and help you hear the supercharger

@coltoncaskey5781 5 ай бұрын

What cams did you go with? This build is incredible btw!

@RantzCore 6 ай бұрын

Windows can keep exhaust sound out of the cab. And a bed floor can quiet exhaust sound from the cab as well. In your video I can barely hear the SC while through the exhaust note.

@Legacy_jake_ 6 ай бұрын

It might sound silly but mcclaren and other manufacturers run a tube from the intake into the cabin to gain in cabin intake sounds

@spicysinglecam 6 ай бұрын

How you like the shifter? I had the gktech one and hated it. About to just drop the money on this one also. 😅

@anthonymaldonado135 6 ай бұрын

Help me build my honda🤙 Thank you for refreshing the old b series

@Justiniscool03 6 ай бұрын

Hey Caleb! What welding table or tables are you using!?

@NXT_LVL 6 ай бұрын

Black Widow Neighbor Haters or a set of Karnage Mufflers would help... Even a Spintech 3000 series might help the volume? FYI Spintech sells legit boomtubes to order

@hotdogbuns255 6 ай бұрын

Need to run a tube from the CAI to the cab.

@CalVlogz 6 ай бұрын

Fucking epic dude! Inspiring build. I have a Nissan hardbody and ima one of the only trucks out there.

@Mr99gsrteg 6 ай бұрын

Definitely weld the silencers shut on the supercharger, it should give you the sounds levels you are after

@waffole6928 6 ай бұрын

weird thought but would some shrounds beside the radiator to block the rocks and rubber the tires will throw at it make any sense

@Junk_GSX 6 ай бұрын

Any reason why you didn’t back purge? I’m gonna attempt to tig weld my own stainless exhaust for my mighty max but was recommended that I back purge

@hugobolzer9183 6 ай бұрын

Put a Christmas tree on the rear for the drift event 🎄🎄

@fabricancustoms 6 ай бұрын

I'm trying to use your discount code for those Manta sleep masks, but it's not working. It would be a great present for some family members! Anyways, great content dude! Keep it coming