FactionFab Rear Shifter Bushing Install

No video

FactionFab Rear Shifter Bushing Install

Рет қаралды 10,740

Күн бұрын

www.subispeed....
Get rid of that dainty little OEM shifter bushing and replace it with a solid FactionFab Rear Shifter Bushing to clean up the sloppiness in the shifter.
Find your FRS, BRZ, 86 and A90 Supra parts here:
Website - www.ftspeed.com/
Instagram - / _ftspeed
Facebook - / ft86speedfactory

Пікірлер: 30

@OlofTheBald 4 жыл бұрын

This video reminded me that I've had a bushing sitting on a shelf in my garage for... jeez, three years now?! What am I doing with my life.

@observer.b_e_l_l_i_s 3 жыл бұрын

Yeahhh gotta jack mine up tomorrow because of how many people recommend it.

@shawnbhagratie5076 4 жыл бұрын

Even though its just quick installs and short videos, i love that y'all are uploading more frequently.

@toddkokko5049 4 жыл бұрын

My wife “What are you under there doing to my new car it’s fine!” Me “Trust me babe, this will make the shifting less sloppy and it will feel more linear.”

@Synthwave89 4 жыл бұрын

What she hears "Trust me babe, jibba jabba mechanical flippidy floppidy shifting sloppy jargon bla bla linear".

@toddkokko5049 4 жыл бұрын

Mario Paul lol. She will walk away saying “Call me if that harbor freight jack stand collapses on ya.”

@erwincanaya7787 4 жыл бұрын

I did this to my outback with 300k and no car lift. It was a nightmare, but actually worth it

@Synthwave89 4 жыл бұрын

Some guy in the ft86 club forums also said it was a nightmare with just jack stands, but he makes it look so easy in the video. Obviously he has a lift but is it that terrible? I wanna do this mod so bad, along with engine mounts, tranny bushings, and diff bushings.

@observer.b_e_l_l_i_s 3 жыл бұрын

@@Synthwave89 It was the exhaust pipe and short throw that gave me a problem. Clearance room gets cut alot and definitely is not as easy as this. Clearance room aside its clearly easy.

@michaeljohn1160 4 жыл бұрын

Oem bushing is pretty stiff, but loosens up after 60k. I upgraded to the jdm Sti 6mt. Mine is a 2018 brz. Super crisp shifting still with rear oem shifter bushing. At 30k. If you do this above bushing, you might want to upgrade the shifter linkage bushings too. I just did this on my s402. 200k. Wasn’t bad. Mainly because I was changing the shifter from a 6mt to jdm Sti short shifter 6mt. So I had a lot of room. Did on jack stands. Did TS linkage bushing too. Only issue was the TS rear bushing was so much taller and the bolts go in at an slight angle, was kind of a “b$&@!” To get them in. Doing just this TS rear bushing isn’t worth it for just the bushing alone. It helps a little. But if you have slop in your shifter, it’s more of the shifter linkage at issue. That’s the shifter linkage bushings and the spacers. And if you change those, do the rear linkage bushings too.

@Siiello 4 жыл бұрын

Can someone that has installed this comment on how noticeable the difference is?

@observer.b_e_l_l_i_s 3 жыл бұрын

Just finished it in conjunction with the Torque Solution short throw and absolutely love it. Its shorter crisper and the bushings fitting helps buff out those short choppy throws. Sure it would help make throws on stock shifter alot more buffed out and a bit more dialed in however if your gonna be under there id recommend getting the two in conjunction over bushing alone.

@observer.b_e_l_l_i_s 3 жыл бұрын

Oh also if already upgraded the exhaust cat back your gonna have less room to work with and may have to juggle around with different tool combinations to get between there or otherwise have to drop the pipes to clear the working area.