Family Game Table - Build Process

Рет қаралды 5,728

6 ай бұрын

This is a walnut table, countertop height with a 5' by 5' top. Total build time was approximately 200 hours. I designed it based on some ideas and pictures provided by the client, and did the mock-up in Shapr3D. The overall dimensions were there and some basic construction concepts, but the build process was a lot of figuring out the details as I went along. Having the legs set at a 45 degree angle definitely added a bit of extra work throughout. I had fun with this one and learned a lot, but I'm happy it's finally delivered - this one took up quite a bit of shop real estate!
My suppliers:
Lumber - cygnuslumber.com
Custom Shop Apron - www.leatherbydragonfly.com
Tools/Wood - www.woodcraft.com/stores/virg...
Most asked question - "What's that thing you use to make the square holes?" It's a square hole punch... available at www.leevalley.com/
Amazon Affiliate Store:
I receive a small commission if you purchase tools or supplies through these links.
Dovetail Saw - amzn.to/4b8heUR
Clamps - amzn.to/3vUqVGf
Titebond Glue - amzn.to/49ePaxf
Festool Domino - amzn.to/4bbgNZP
Festool Kapex - amzn.to/3SzLxfK
Dado Blades - amzn.to/497XmPI
Waterlox Finish - amzn.to/3HCPVUQ
Table Saw Blades - amzn.to/3u9UYsO
Digital Angle Gauge - amzn.to/3SeEPdG
#gametable #customwoodworking #customfurniture

Пікірлер: 35

@Wood_Slice 5 ай бұрын

The way you attached those legs and the ebony drawer pulls just made my day. 👌

@cleancutwoodworks 5 ай бұрын

Thanks, brother 👍👊 Yeah, allowing that 5’ top to “float” over the base - and the 4 drawers in the apron - was a bit of a challenge. Thanks for reaching out!

@mobareini4572 5 ай бұрын

Ready for Poker, a wonderful Table. Kind regards from Vienna.

@leatherbydragonfly 5 ай бұрын

Absolutely stunning Ben. I love how methodical you are with the fine details, though subtle, those details make an impact on the overall design.

@cleancutwoodworks 5 ай бұрын

Thanks a bunch!

@michaelvenditti5982 3 ай бұрын

The attentipn to detail is unbelievable

@jimaga5805 5 ай бұрын

Wow! As a fellow woodworker I have to say your work is NEXT LEVEL! Sincerely.

@cleancutwoodworks 5 ай бұрын

Wow, thank you!

@alfonsodellasino4265 5 ай бұрын

Hello, great work, a fine piece of furniture worked with great skill and it is very pleasant to follow you in the workmanship. Greetings from Italy

@cleancutwoodworks 5 ай бұрын

Thank you very much!

@DuricCustomWoodwork 5 ай бұрын

Attention to detail immaculate. Awesome results

@cleancutwoodworks 5 ай бұрын

Thank you!

@donesry2902 5 ай бұрын

Beautiful work. Thank you for sharing and inspiring!

@Kapt6911 5 ай бұрын

Awesome work 👍

@dwightpennington1925 5 ай бұрын

I love that you’re so meticulous and exacting. I love woodworking like that on fine furniture!

@cleancutwoodworks 5 ай бұрын

Yes! Thank you!

@stevens.6351 5 ай бұрын

Wow! Wish I had those skills. Great work

@cleancutwoodworks 5 ай бұрын

Thank you very much!

@TWC6724 5 ай бұрын

Love your work brother. Great job. Again.

@cleancutwoodworks 5 ай бұрын

Much appreciated

@timzeller1541 5 ай бұрын

This project was done with excellence and clearly attention to detail. Thank you for allowing others to view your work ethic as you accomplished this piece of work. You're an purest in every sense of the word!

@cleancutwoodworks 5 ай бұрын

Thank you very much!

@timzeller1541 5 ай бұрын

@@cleancutwoodworks you're very welcome Kind Sir!

@woodnotestudio 5 ай бұрын

That came out great. Going to be trying something like that soon. Those knobs are brilliant. Hope you’re ok with me using that idea.

@cleancutwoodworks 5 ай бұрын

Appreciate it! The key to success with those knobs is the drill press trick and doing the top chamfers with the shooting board. The first time I made these I cut them out on the scroll saw, then spent HOURS sanding them. 🙄 Good luck! I’d like to see how they turn out - hit me up on Instagram @cleancutwoodworks

@juancamedino6173 5 ай бұрын

excelente acabado en la madera. felicitaciones

@pmelchman 5 ай бұрын

OMG Ben. What a build. I could not of built this. I did pick up several tips. We really enjoy watching your videos! What’s the next project on the bench? I have to steel the process of making this drawer pulls… clever

@cleancutwoodworks 5 ай бұрын

Appreciate it! Small chest in sycamore coming soon. 👊