Fancy Rivets | Jewelry Tips with Nancy

Рет қаралды 104,893

13 жыл бұрын

Nancy L.T. Hamilton shows you how to do "Fancy" riveting in jewelry, including making a screw rivet and a dimpled rivet.
The set of four riveting tools is by Tim Lazure at: timlazure.com/?page_id=29
The tool I use to make the nail heads is a Gauge for drill bits and screws. Here is the link at Micro-Mark: www.micromark.com/gauge-for-dr...
View the companion "How to Rivet" video if you haven't seen it yet:
• Riveting Basics Tutori...
-----
If you LIKE this video, please click "Like", share with your friends and SUBSCRIBE please.
Thank you! I appreciate it.
PLEASE NOTE: I have an EXTENSIVE website that can answer many of your questions.
For more information visit: www.nancylthamilton.com/
Follow me on Facebook: / nancylthamiltonjewelry
See my jewelry on Pinterest: www.pinterest.com/nancylthami...

Пікірлер: 99

@Heymimi 13 жыл бұрын

Your videos are wonderful! I love your humor and willingness to share all this amazing information. Thanks for your generosity !

@kathleenmitchell6297 11 жыл бұрын

I am so impressed with these videos. Nancy what a wonderful person you are to share your incredible knowledge of jewelry making.

@violenta141 8 жыл бұрын

I've watched this video a couple of times, and I love how instructive and humorous you are at the same time!

@ScreeminMeeme 12 жыл бұрын

Thanks Nancy for the very informative video....very helpful for those of us who are newbies at metalworking jewelry. I look forward to your sharing more of your expertise. :)

@sisteryaya24 8 жыл бұрын

I love your Tutorials! You bring so much personality into them as well as skill. Thank you!

@pheenix42 11 жыл бұрын

Speaking of rivets, I remember many moons ago in junior high metal shop watching my teacher show the use of common flat head nails as a rivet on a spatula project. I was so impressed that it's stuck with me 30+ years later.

@allanthompson9695 Жыл бұрын

I need to stop watching these riveting videos, and get back to the bench. Thanks Nancy, very useful.

@fanellina.1611 6 жыл бұрын

Thank you for sharing with us your advice. It's very precious, and I'm so grateful you're so generous. Thank you.

@NancyHamiltonJewelry 12 жыл бұрын

Why thank you. I appreciate your wonderful words! Nancy

@lindanelson9661 8 жыл бұрын

Nancy is my favorite metal smith. I am pretty sure I have watched all her videos.

@samarahrain7931 7 жыл бұрын

Linda Nelson best in character 😊

@TheLollyChops 12 жыл бұрын

I always love your videos! Was thrilled to see this one come through! Thanks so much for sharing so much with us! You rock!

@leeboy8689 3 жыл бұрын

Every time I watch this I can't help but laugh when she says this video is very riveting 😂❤

@NancyHamiltonJewelry 11 жыл бұрын

Hi Pheenix42, Amazing the details we recall! I've used steel nails, copper nails, etc. They make great rivets. Thanks for the comment and have a wonderful new year.

@renestclair5307 7 жыл бұрын

I loved everything about this video - especially you! Looking forward to watching more of them.

@birdieroad 12 жыл бұрын

Awesome anvil!! Thanks for this great "how to" Nancy!

@samuellaramsey5963 3 жыл бұрын

WOW!!! Another great vid...thank you for sharing your talent!

@CharlesStruble 13 жыл бұрын

Nancy, I did in fact find this one riveting! Incidentally, nice torch sounds! And my thanks to the producer...

@hardindesigns5118 11 жыл бұрын

Really enjoyed your video on fancy riveting. Your camera work is far superior to what I'm used to seeing on youtube. Keep up the good work. I'm going now to check out all your other videos! Meg

@r.rouchonimages7419 8 жыл бұрын

I didn't realize how handy my Dremel was. love u r videos Mrs. Nancy, your a talented lady to saythe least

@corystreat7605 5 жыл бұрын

Great tip Nancy! Thank you Cory

@sarahdysart2832 4 жыл бұрын

I love the humor in your video! :D My favorite rivet is the patterned rivet you showed as a flower center.

@NancyHamiltonJewelry 12 жыл бұрын

Hi Creative, Thanks so much for the fabulous compliments. I'm glad that they are helping you. Let me know if you have any questions. Thanks again. N

@maureenkasischke7864 7 жыл бұрын

Thanks Nancy. Enjoy your videos!

@jawarden2006 12 жыл бұрын

Thank you. As always an entertaining and educational video. Well done!

@takdlw 8 жыл бұрын

Nancy - Saw that you were on Craftsy and then proceeded to check out your videos! I love them all and you are entertaining, to boot! I will be taking the Craftsy "prong setting" class because of this. Thanks for sharing your tricks of the trade...... I haven't taken this many notes in a LONG TIME!

@emilycarmany8600 3 жыл бұрын

Wow!!! So cool - I love that stamen

@lpatrick357 3 жыл бұрын

Thank you for sharing! I’m soaking it all in

@NancyHamiltonJewelry 11 жыл бұрын

Hi Salkis, I'm assuming that you are talking about the drill bit/screw gauge? I've posted the link under the video in the information area. Micro-Mark carries them. KZfaq doesn't allow links to be posted in comments so, here's a variation of the link that they will accept: micromark (dot) com/gauge-for-drill-bits-and-screws,6480.html. Thanks for watching and writing. Nancy

@purrucajb1 10 жыл бұрын

You sure do things very good I like your videos

@denisedavis7679 10 жыл бұрын

Hi Nancy, your videos are awesome. Thank you for sharing.

@dragonbone5000 11 жыл бұрын

Nice! Thanks for sharing.

@DeborahBergenbeaderreader 9 жыл бұрын

I'm really learning a bunch!!! Thanks so much for sharing I wish we lived closer I could take a class from you:)

@helenculwell8726 11 жыл бұрын

Hi Nancy, That looks like a lot of fun making those different types of rivets. Love it when you give us ideas to make it easier. I need to go to the hardware store to purchase one of those steel plates you used. I'll need to play your video again before I go so I have the name of the tool. The holidays are almost upon us and I want to wish you and yours much happiness this season and a happy and healthy New Years. Peace...

@desireeforget3717 7 жыл бұрын

nancy! you're hilarious and i love your puns! your videos are great too and very helpful :)

@carmenponcedeleon2693 4 жыл бұрын

Excellent video as always! Thank you 🙏🏽

@lktruly1 12 жыл бұрын

Thank you, wonderful. Best riveting info.

@NancyHamiltonJewelry 12 жыл бұрын

Thank you ScreeminMeeme (love the name). New videos should be appearing soon! Thanks for watching and taking the time to comment! N

@NancyHamiltonJewelry 12 жыл бұрын

Thank you!

@NancyHamiltonJewelry 13 жыл бұрын

Ms Paraboiled, thanks for the kind words and the subscription!

@MsParaboiled 13 жыл бұрын

so helpful! thanks!

@gerryarty8342 4 жыл бұрын

Great so helpful, like all your vidoes

@reneesmom86 11 жыл бұрын

Another wonderful video... I love u and your videos... U make it fun to learn Miss Nancy....xox

@isallybutton 12 жыл бұрын

great video. I didn't know that i can roll the wire to make it straight. I just want to try the riveting technique but don't want to get all new tools and supplies. With your video, i can use what i have. Trip to hardware store tomorrow :)

@lloydskidmore Жыл бұрын

Wish I could of seen you make that ball end , good video, I’m trying to learn to make revits for a model steam locomotive

@jorgeromero663 7 жыл бұрын

Nancy you are just great! ah.....and I like your style

@armellm4357 9 жыл бұрын

Thanks so much! I really enjoy your videos...not only educational but a hoot to boot!! (love your feline and your human assistants too...both are lovely!)

@NancyHamiltonJewelry 11 жыл бұрын

Hi Helen, riveting IS, actually, fun. Hope you can find the plate - if not, there are links for a few of the items in the video under my comments. Take care and happy holidays to you too! Thanks for writing. Nancy

@philippboetcher9959 3 жыл бұрын

Great instructions, thanks:)

@NancyHamiltonJewelry 13 жыл бұрын

You know, one of the things that I forgot to put into the video was the use of a cup bur on the balled end AFTER riveting! Sorry about that. Thanks for watching.

@Karemitros 12 жыл бұрын

Nice video, and you make me giggle as well so it's a win! :D

@NancyHamiltonJewelry 11 жыл бұрын

Hi Renee's Mom! Thank you so much. I think learning should be entertaining - otherwise, we all fall asleep and don't learn a danged thing. I know, I slept through geometry class in school (among others) and now, as a somewhat adult person, am really irritated with my teacher. \Who would have thought that I'd actually need that knowledge? Not me or her, apparently. Ah well... Thanks bunches, great holiday to you and yours. Take care. Nancy

@andyhuangy4 3 жыл бұрын

Hiya! Very informative video thank you. What was the name of that white flex shaft but that you used for sanding?

@SalkisRe 11 жыл бұрын

what are you using to hammer the nail on, that big piece of steel with the hole in it what is that called?

@phpoland 13 жыл бұрын

Thanks for the video- very helpful - quick question, what kind of polishing wheel are you using to smooth out the nailhead?

@foxiepoxi9245 6 жыл бұрын

Hello Nancy

@maritzaalayon2014 5 жыл бұрын

Me gusto amiga gracias gracias gracias 🙏🇻🇪⚜👍🏼

@roslyngomez3369 5 жыл бұрын

HI Nancy, I've been enjoying your videos.Thank you so much for sharing your knowledge with us. On this video I noticed that you placed the fancy head rivet through the flower with petals, and the petals are not flat. How are you going to set that rivet and not smash the petals? Thanks

@NancyHamiltonJewelry 12 жыл бұрын

@isallybutton I hope you had a fabulous hardware store shop! Harbor Freight Tools is another dangerous place to shop! Cheap and plentiful tools. Happy riveting. Thanks for watching and commenting. Nancy

@woodmanmade 13 жыл бұрын

@strube1369 Glad you enjoyed it Strube! How'd you like the "Senior Moment"?

@puss1234able 6 жыл бұрын

older video, maybe......but still REALLY helpful! Thanks, NLTH!

@NancyHamiltonJewelry 11 жыл бұрын

Hi Excelbaby, Actually, a trip to Harbor Freight is on the list! I just need to figure out when to film and (probably) get their permission. I started my biz with the tools I purchased from them and tools from my (now passed) friend Al Pine. Love Harbor Freight. Will love them even more if they let me film! Thanks for the fabulous comment. Talk to you later and take care. Nancy

@maxolin1983 7 жыл бұрын

Thank you for your wonderful instructional videos! Love your humor too. Where did you get that large anvil? I need one but the ones I have seen are VERY pricey..any suggestions would be appreciated. Also, do you do in person instruction/classes?

@lp7755 8 жыл бұрын

How did you get the ball on the end of the wire? Did you solder on a ball?

@NancyHamiltonJewelry 11 жыл бұрын

Thanks ExcelBaby! That tool collecting can get dangerous - the word addicted comes to mind. Have fun at Harbor Freight, I know that I do. Take care and thanks again. Nancy

@sarahfoster4117 11 жыл бұрын

Hi Nancy, When you want to use balled rivet, how do you keep the ball from changing shape? You can not set it on any thing hard to hammer the other side, so do you use some thing that is con caved?

@ianglock1 12 жыл бұрын

Awesome. I've been looking for tips for a while now. I just subscribed to your channel. :D Try sticking your rivet into a collet or drill chuck just hand tightened and rub it lightly against sandpaper. You'll get it nice and true.

@NancyHamiltonJewelry 11 жыл бұрын

Hi 7D, Well thank you very much. I had no idea they even had a name. Now, all that I have to do is remember the name! Thanks again. Nancy

@DavidBrown-tt2lm Жыл бұрын

Excellent video! Question - when you set a decorative rivet, what do you use for a bucking bar? Anvil? Steel block? other?

@NancyHamiltonJewelry 12 жыл бұрын

Thanks ianglock1. I've used that technique - just forgot to mention it, I guess. Thanks for the reminder! That technique does make a nicely rounded nail head. Take Care and enjoy! Nancy

@anidaipod 11 жыл бұрын

Hello Nancy, I hope this isn't a FAQ, but what kind of drill do you use? I'm in the market. I'm so looking forward to your full length project videos! Thanks for all your time and expertise, Danielle

@NandaUsername 2 жыл бұрын

Is it possible to make rivets from other metal wires? I use zinc for my jewelry, so I am wondering what kind of rivets would suit. Thank you for answering.

@phpoland 13 жыл бұрын

Found them -- thank you...

@NancyHamiltonJewelry 13 жыл бұрын

@phpoland You're welcome. It is not actually a wheel but a sanding disk made by Moore. Since we can't add links here, I'll try to type it so you can find it. You'll need to delete the spaces. A company in Oakland, Ca - Otto Frei carries them. I'm sure there are other suppliers. That link is (kinda): ottofrei. com /store /home. php?cat = 784

@NancyHamiltonJewelry 13 жыл бұрын

Stony, Thank you and thank you again.

@NancyHamiltonJewelry 12 жыл бұрын

Hi Star, Thank you for laughing with me. It's not fun to laugh in a vacuum! Thank you also, for writing such sweet words. Next video: my studio tour. It's where I overuse the word "stuff" and show everyone around. Thanks again. Nancy

@BlooStorm1 2 жыл бұрын

Thank you for your tutorial (and you crack me up besides …)

@7DMusic 12 жыл бұрын

The little holes you where punching are called stipples, and you where stippling the head of your rivet. You taught me, Ill teach you :)

@maineiacts 11 жыл бұрын

Hey Nancy!! Hope you are over your cold by now,,poor thing!! Amazing that you make vids while feeling a little yukky! What a trooper! Anyway I have enjoyed watching this video and your others,,Looking forward to more! Thank you very much for sharing your knowledge and expertise! Just let me know where I should send a box of Kleenex..for your next vid,,lol!! Keep up the super work! :-D -Mindi

@NancyHamiltonJewelry 12 жыл бұрын

@francissanfo717 Am I weird enough to go viral? Dang. Go Malawi! Thanks. N

@erikasteponic 10 жыл бұрын

You are adorable. I just subscribed to learn all I can from you!

@Utewber 11 жыл бұрын

Hello Nancy. My name is Andres and i'm from New York. I have a stainless steel mens bracelet that uses small rivet or rivet-like pins that push in through each other thru either side of the link in order to hold it in place. this one particular pin has fallen out 3 times and i found myself paying an exorbitant amount for each repair. I have tirelessly tried finding the part on my own for months with no success. Please tell me where i can find this part. If you need pics let me know. Thanks

@zoeylife2 11 жыл бұрын

you are so good. if you have classes in real life, id sign up!

@lindalove6616 6 жыл бұрын

Girlfriend!!! Thank you for demonstrating your technique!! I learned so much!!!💋💋💋

@NancyHamiltonJewelry 13 жыл бұрын

@Bonitomio Hi D Shane, First off thanks! Second: I got my large anvil from Harbor Freight and my small one from Rio Grande Jewelry. I'd post links but You Tube won't allow it here. You can email me from my website for longer, more detailed info. Flex shaft - a cheap version that I use is from Harbor Freight. Rio Grande sells (and I also use) a better quality one from Foredom. I've never heard of the Carvemaster. But, it's for wood, I bet and may not have enough oomph for metal. email me. N

@Utewber 11 жыл бұрын

thank you Nancy sooo much for replying.....I was losing hope. I have tried everything i possibly could. I will send you a picture but your email doesnt seem to work. Could you please send it to me exactly how it should be typed so i can forward the image.....thanks again.

@freddyzerlin2009 8 жыл бұрын

Nice!!! kisses!

@thundercrow1965 5 жыл бұрын

Rivet! Rivet! 🐸 🤣

@NancyHamiltonJewelry 11 жыл бұрын

Hi maineiacts, Thank you so much for the fabulous comment! You made my day! I'll let you know when I need some kleenex :-) I appreciate you taking the time to write. Take care, Nancy

@danielleantoinettemeyer9121 3 жыл бұрын

"The muscle I hustle is real for my friends But the muscle I keep for myself is pretend" I also pretend a lot when making jewelry :)

@AnneAndersonFoxiepaws 6 жыл бұрын

Oh hey my 'Senior Moments' are getting more and more frequent these days....What a life...If its not the incipient senility then its my joints in the cold mornings here in London! ....Now that's a proper Senior Moment moan lol!

@joeorton1218 6 жыл бұрын

Lol ur insane too funny

@NancyHamiltonJewelry 11 жыл бұрын

Andres, Hi! I would have to see a picture of the hinge pin. Have you tried making your own from stainless steel wire? Email me at Nancy.lt.hamilton (dot) com. Have you tried googling watch making supplies, watchmaker supplies, watch making materials, etc.? Good luck and let me know. N