Mitsubishi Outlander 46G4 2.4L Timing Belt Replacment Part 1

Рет қаралды 99,438

6 жыл бұрын

Time to show some How-To videos related to car repair. This video covers setup, tear down and cleanup of the Timing belt and water pump.
If you have ever wondered if you have what it takes to do this job. You do, and this video will help you do it.

Пікірлер: 49

@kosiebantjes105 3 жыл бұрын

Oil pump sprocket will only line up every 3rd or 4th rotation because it is not driven at the same ratio as the camshaft sprocket. Previous guy did the job correctly 👍🏻

@davidfrazier3641 6 жыл бұрын

Enjoyed watching the video.

@KentuckyRanger 6 жыл бұрын

Lord, manufacturers just love to make things as complicated as possible... LOL! Awesome how to!

@MrKofi137 10 ай бұрын

Could you please send me the link for part 2? Your steps are outstanding, thank you.

@FarpointFarms 10 ай бұрын

It should be on the channel

@markwarner578 5 жыл бұрын

The oil pulley is 3 to one

@yoz1967 3 жыл бұрын

how many times do I have to rotate the cam to get the marks to line up?

@jameshrenn 3 жыл бұрын

This timing belt job was one of the easiest ones I've ever done without power tools 😁👍

@FarpointFarms 3 жыл бұрын

Right on!

@MsCW-cq9us 2 жыл бұрын

@@FarpointFarms hi can you please help me my 2004 outlander comes on but won’t Turn over sound like it’s about to start but doesn’t?

@folch52 2 жыл бұрын

I assume the eclipse 2.4 4g would be about the same correct? Don't know how difficult this would be

@silverfalconhopkins 4 жыл бұрын

Do you have a part 3

@edwdz1 5 жыл бұрын

Did you did part 3

@avicii6782 3 жыл бұрын

4g69 is the engine btw

@flipindus 4 жыл бұрын

hi there. I am thinking about losing up the tension on my 4g69 lancer timing belt which I think its overtightened that's causing my engine to be loud on high rpm. my question is if I loosen up the tension by a notch and tighten back the pulley tensioner bolt to proper torque, is that ok for me to do without messing up the timing?? a reply or suggestion will be highly appreciated..

@FarpointFarms 4 жыл бұрын

There is a set way of getting the tightness right. I think it's 3 ftlbs. if it's too loose, BANG! So be careful!

@flipindus 3 жыл бұрын

@@FarpointFarms do u still works on mitsubishi? if so, where are u located?

@avicii6782 3 жыл бұрын

I own lancers and they make a lot of noise at high rpms messing with the belt could be bad for it and actual video would help figure the problem

@samer851 5 жыл бұрын

at 17:20 - How do you figure this is coolant leak ? and is this sludge what appears to be black ? .. if so, is that a lot ?

@FarpointFarms 5 жыл бұрын

Texture and the stains it left on the ground gave it away. It was coming from the weap hole.

@retrodave9707 5 жыл бұрын

Hi. Did you do a part two???

@FarpointFarms 5 жыл бұрын

Yes, It's on my page somewhere.

@joonajks 4 жыл бұрын

Is this vehicle very reliable for heavy driving to make deliveries, in your opinion?

@tayvint1544 3 жыл бұрын

I have a 2004 I have delivered pizzas in for years, it a very reliable car.

@gothicknight6785 5 жыл бұрын

What brand timing belt and water pump did you use.

@N26EEP 4 жыл бұрын

Gates

@EMW_Music 2 жыл бұрын

Anyone know if the bottom cover can be removed without taking the top cover and motor mount off? I need to replace the crankshaft sensor which is under the lower cover.

@haroldburris3781 2 жыл бұрын

Yes you can just remove the bottom cover. You most likely have to remove small bolts in top cover just to give some wiggle room

@ernestmorales625 5 жыл бұрын

I had mine kit (Belt, Pump, Tensioner) replaced about 2 months ago and now I get a knock,tap in the area of the timing chain/water pump. I took it back to explain that this noise did not exist prior to his work on my 2006 Outlander but he said it was within the motor so he put an engine oil additive in the oil but again I've got the noise. Most forums say that it's a loose tensioner or a belt issue. What do you think is wrong? I appreciate your help. I'm also dropping off the car in a couple of days again.

@FarpointFarms 5 жыл бұрын

I'd bet a bunch that the idler is setup wrong or has improper tension. These are not "easy" timing belts, and can be a real pain to setup right. I'd demand that they put in writing that its "OK" and that you will be covered if it tosses the belt.

@ernestmorales625 5 жыл бұрын

Thanks! I dropped it off again yesterday and have yet to hear about the car prognosis. I mentioned what I have read on forums about the various issues. I'll post what is done to correct the issues if it's fixed.

@DavidJohnson-sk7kz 5 жыл бұрын

I just did this on a 2011 Mitsubishi galant & put a new crank sensor & now it wont start. Any idea's or help ,id really appreciate. Its cranks & the belts are turning ,but no start. Thanks

@tarekhamoud1012 Жыл бұрын

Hi,cannot find the other parts of the video?

@FarpointFarms Жыл бұрын

UGH... KZfaq had me take it down to music copyright infringement... sorry

@tarekhamoud1012 Жыл бұрын

@@FarpointFarms Thank you for replying. I have replaced the timing belt of my car but i cannot fix back the water pump pulley because of its very tight position. Any advice on that?

@gustavobattle1323 2 жыл бұрын

hello good day, I try to get part 3 but I can't

@cupompa Жыл бұрын

Who is that model in the background picture? :31 Is it Xena the Warrior Princess?

@FarpointFarms Жыл бұрын

I think it is Elvira

@_olamilekan Жыл бұрын

What is the belt size

@FarpointFarms Жыл бұрын

It's been so long, I don't remember.

@ausKhorinis 5 жыл бұрын

It's 4G69, not 4G64

@tajhealthnature8570 5 жыл бұрын

How did you know the timing belt need to be change

@FarpointFarms 5 жыл бұрын

Mileage, The belt is due every 60K, but in this case, the Water pump started to leak so I decided to do it all at the same time.

@tajhealthnature8570 5 жыл бұрын

Farpoint Farms i have a 2006..Mitsubishi outlander..4 cylinder it was making a funny..sound..when a was..driving.. Then it shutoff.. I check the spark plug..no spark..so order ignition coil.. I hope it start 🆙

@FarpointFarms 5 жыл бұрын

Uh oh... That sounds like a failed Timing belt alright. When was the last time it was replaced?

@tajhealthnature8570 5 жыл бұрын

Farpoint Farms no never..Chang..belt.. the mileage is 105 k.. But i check the belt.. The belt seems fine..but the engine turn over.no start.. .the timing belt Dont spin..only the altinator belt...

@tajhealthnature8570 5 жыл бұрын

Farpoint Farms no never..Chang..belt.. the mileage is 105 k.. But i check the belt.. The belt seems fine..but the engine turn over.no start.. .the timing belt Dont spin..only the altinator belt...