No video
Fast Audi vw front brakes pads rotors flat rate dealer tech a3 a4 s4 a5 s5 q5 q7 a6 s6 a7 2.0t B8 vw
Рет қаралды 11,223
Күн бұрын
@classics289 8 ай бұрын
I was hoping for torque specs but I guess everything thing in your shop is just Viking tight! Praise Oden brother!
@ripsaw2322 3 жыл бұрын
I wish I had a lift, I dont think id ever leave the garage.
@danrook5757 2 жыл бұрын
My wife told me to put a lift in our garage
@danrook5757 3 жыл бұрын
Naptown, pretty sure they have a light coat of oil. Doesn’t hurt to wash them down with brake cleaner
@bryan-th3xf 2 ай бұрын
thanks for all this knowledge 💡
@alex4alexn 3 жыл бұрын
you are the man! do you have to do different steps for the back wheels because of the parking brake? Appreciate all the vids!
@EXOVCDS 3 жыл бұрын
Pop! Simple, easy... why have I never done that!!!???
@fuller9box 3 жыл бұрын
This dude really knows his stuff! I like him, even though he voted for the wrong party!
@redauwg911 3 жыл бұрын
he voted the same as the majority of people
@ziada.6825 2 ай бұрын
My heart broke when I saw him hang the brake caliper by the brake line that’s dangerous 5:29
@jefflatham3247 5 ай бұрын
GOOD advice. GOOD attitude. Thanks...
@koggism Жыл бұрын
Good usable info given with reall attitude
@islandlifevlogs5957 3 жыл бұрын
Pump the brakes before you start the vehicle not before you drive .. before starting the engine make sure to pump the brakes until the peddle is nice and firm
@AymenMusnic Жыл бұрын
Thanks for the tips, I appreciate it.
@wernerbergh7722 3 жыл бұрын
Thumbs up
@peteyperlo4358 3 жыл бұрын
Why not open the hydraulic brake bleeder valve on each caliper / wheel and let the old, not good brake fluid - escape into a disposal cup, and let fresh brake fluid from the master cylinder replace that?
@steezyfishing 8 ай бұрын
Can I just slide my rotors out from the caliper Bridge instead of removing it? I live in Chicago, shits rusted and it's cold right now. I don't wanna spend time or energy with a torch and breaker car on Daytona 3 ton jacks. Ive done this on my gf jetta 17' 1.4t.
@okc0mputor 3 жыл бұрын
Great video. Very helpful. Like button SMASHED. Thank you!!!
@RealJayEmZee 3 жыл бұрын
Great video. Would you advise to remove some of the brake fluid on very worn pads and then top it off after new pads are installed? Any plans to show switching to coilovers for these cars? Or other suspension videos?
@NaptownTuner 3 жыл бұрын
Yes I’ll probably get around to doing a brake flush video and that’s the fastest way to remove / replace the fluid before the flush. I loved coilovers on my drift cars that I had in the past but on these cars I like factory sport suspension or lowering springs for ride quality but someone might eventually want them installed so I’ll at least get around to a lowering springs video
@RealJayEmZee 3 жыл бұрын
@@NaptownTuner my A4 8.5 was base model suspension. I was hoping to get it track ready with KW coilover. Do you think the Audi base suspension would still be decent with new springs? I used to drive Firebirds so everything in my A4 seems premium haha. Thanks for help btw
@NaptownTuner 3 жыл бұрын
@@RealJayEmZee personally I haven’t had to replace any struts on 2009+ ( that aren’t magnetic ride ) you can drain your wallet replacing everything but the suspension arms/ bushings are a nice thing to do at least the front lower rear control arms I have a video on already. But just springs or springs and new struts wouldn’t hurt if planning to keep the car for years.
@bryan-th3xf 2 ай бұрын
what brake pads do you suggest Ate or akebono
@djohnnn 10 ай бұрын
You seem so irritated like you're being forced to make this video 😅. Thanks for posting BTW.
@austinbravoaldama3990 3 жыл бұрын
Wonderfull Information Thanks 🙏 will this work on the 2012 Audi A4? Quattro, please let me no, I am following your channel and looking forward to all your videos.
@deejay4837 2 жыл бұрын
Isn't it really bad if fluid leaks past the seals on the master cylinder?...or is it acceptable in this situation..
@123billybob1 3 жыл бұрын
Is this video only showing how to change the the front breaks? Or is this the same for all 4?
@victorkeith4069 3 жыл бұрын
Naptown I'm in the Chicity. Want to bring my B8 to you for an inspection. How can we link up?🤷🏿♂️
@steezyoudi Жыл бұрын
I feel my car shimmy but no steering wheel shake. I notice this when braking. Wrapped rotors? Can this happen to all four rotors?
@NaptownTuner Жыл бұрын
Usually just the front rotors, the steering wheel doesn’t have to shake that’s only when it’s really bad
@dolceclk 3 жыл бұрын
Your name says naptown but are you in Indianapolis? I have a 2010 Audi A4 awd but I’m having trouble starting my car.. I’ve been told it was a pressure pump but I personally believe it could be something as simple as spark plugs/ignition coil packs. Is it possible for a diagnosis in person?
@dolceclk 3 жыл бұрын
I’ve been having my Audi for almost 2yrs and I am just now experiencing a major problem with my car an would like your help, thanks!
@naturehomestudioinc8103 3 жыл бұрын
Video for rear subframe
@jamesbates5949 3 жыл бұрын
Will a bad turbo cause a start no crank situation In a 2.0t A5 ? Or will any part of a bad turbo cause a a crank. No start? I’m getting fired and fire I know for sure.
@NaptownTuner 3 жыл бұрын
You’re gonna have to come up with more info for anyone to be able to help. Probably timing but I don’t waste my time diagnosing over the keyboard
@ramonfernandezlopez5373 3 жыл бұрын
Hi mate, first of all, thank you very much for your content, it is much appreciated. I’m trying to buy new front discs for my Audi A5 2.0 TFSI 2009. But when I check online everywhere seems there’s 2 sizes 314 and 320mm diameter for the front discs. Is there any way I can check which ones I should be using without actually dismantle them? Does it matter? Best regards
@NaptownTuner 3 жыл бұрын
I honestly don’t pay too much attention and order them by the year I believe 320mm is what I use but I’ll do a brake upgrade video soon with s4/s5 rotors on an a4
@ramonfernandezlopez5373 3 жыл бұрын
@@NaptownTuner Thank you
@seat786 3 жыл бұрын
@@ramonfernandezlopez5373 check the PR codes on the build sticker in the spare wheel well, should have a code '1LT' which means you got 314mm on front.
@ramonfernandezlopez5373 3 жыл бұрын
@@seat786 brilliant man! Thank you very much
@S4_QUATTROPOWER 3 жыл бұрын
I accidentally stripped the T30 screw from my rear rotor (right side) any way to get it off? Also where can I get a new one?
@EXOVCDS 3 жыл бұрын
Use a drill to drill off the head. Once the rotor is off, you can grab the remaining piece with vice grip pliers to remove it from the hub.
@danrook5757 Жыл бұрын
Ahhhhhhh, į hate that
@ronwiggins9081 3 жыл бұрын
Do the rotors have to be changed every time you replace the pads?
@NaptownTuner 3 жыл бұрын
No not if it’s not warped glazed grooved or excessively worn.
@neilg3364 3 жыл бұрын
Two sets of pads to a set of discs (normally)
@somename8831 3 жыл бұрын
This seems simple enough, not sure why this should cost $800 to do.
@danrook5757 2 жыл бұрын
If u can own a Audi, u can afford the 800 dollars
FCP Euro
Рет қаралды 154 М.
20min water pump replacement 2.0t Audi A4 a5 a6 q5 TFSI coolant leak flat rate tech antifreeze b8 vw
NaptownTuner
Рет қаралды 162 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,4 МЛН
Top 4 Reasons your 2.0t Audi / VW will leave you stranded reliability fixes before needing tow truck
NaptownTuner
Рет қаралды 140 М.
FCP Euro
Рет қаралды 29 М.
NaptownTuner
Рет қаралды 100 М.
RB The Mechanic
Рет қаралды 570 М.