🏁Fast Racing Tinywhoop🏁FULL BUILD TUTORIAL🔥

Рет қаралды 9,193

Күн бұрын

Hello Pilots! (READ DESCRIPTION)
In this next tutorial video I will show you how to build tinywhoop racer.
SPEC:
AIO: BETAFPV F4 Cross
VTX: OVX300
MOTORS: SE0702 28K
CAMERA: BETAFPV C03
BUILD WEIGHT 18.9G With Whip antenna, 17.9G Without
POWER: BT2.0 SYSTEM WITH TATTU 300MAH
==============Leave a SUB for more tutorials!! :)================
00:00:00--Intro
00:00:25--Parts
00:05:27--Tools
00:08:00--Solder VTX Wires
00:11:43--Replace BT2.0 Power Pigtail
00:16:28--Instal Rubber Dampers in AIO
00:16:48--Prep and Install VTX
00:19:17--Solder VTX and Camera Wires to AIO
00:24:11--Solder Motor Wires
00:25:24--Install Electronics in Frame
00:30:10--Cut and Prepare Props + Bonus TIPS
00:32:58--TAKE IT ON A RIP!
00:37:20--Outro

Пікірлер: 54

@theagent578 3 ай бұрын

The level of control you get with these whoops is insane. Great build video.

@grox3857 3 ай бұрын

Thanks! Just keep flying bro❤

@polishsoundscapes 3 ай бұрын

Thanks for the tutorial - lots of valuable tips on building a high-performance racing tiny whoop.

@derecktaitt8457 3 ай бұрын

Nice build enjoyed every minute looking forward to more in the future 🔥

@Greenhorn_FPV 3 ай бұрын

I want that flight controller soldering stand!!! 😍

@balc3r 3 ай бұрын

dobra robota! 👍

@Braincho 2 ай бұрын

Amazing!!! Mega pro work and explanation!!!

@grox3857 2 ай бұрын

Thanks!!

@JoJoFPV 3 ай бұрын

Nice! Great tips thanks for sharing 😊

@h2o40fpv 3 ай бұрын

Great video thank you.

@para9111 3 ай бұрын

UR still learning?Like for what Master Apprentice Jedi?Nice flying man.

@LeshaRodin 3 ай бұрын

Im flying this same build for almost a year with same 1610 biblades cutted to 35 but with hdzero. its great

@wincydelavega653 3 ай бұрын

Sheshh!!!, your technique and ways is same as mine love it

@megamanconrad 3 ай бұрын

Nice build dude

@shogunemperor 3 ай бұрын

Awesome video man

@grox3857 3 ай бұрын

Thanks a lot Man, I'm watching your videos too :D

@shogunemperor 3 ай бұрын

@@grox3857 aaww thanks my bro! Really appreciate the love!!

@qwadimodo1998 3 ай бұрын

Nice tutorial

@butterflyfpv 3 ай бұрын

Nice video for the community!

@grox3857 3 ай бұрын

Thanks! :)

@humbertocortes68 3 ай бұрын

Will be better if you put de links of purchase of the components....😊

@CostaFPV 3 ай бұрын

Tks for share 👍

@u_fpv 3 ай бұрын

nice😁

@dmitryg.8298 3 ай бұрын

Lightest vtx - NameLessRC nano400 (0.7 g)

@grox3857 3 ай бұрын

Thanks for info, need to test it out!! :D

@grox3857 3 ай бұрын

What do you think about this build? You can write here :)

@alenbrk1368 2 ай бұрын

Thanks for the detailed Explanation! Nice build! Just one Question: Do you need to set the VTX Table or you just use the FC Betaflight settings it comes with?

@grox3857 2 ай бұрын

Yess, ovx300 vtx table is opensource and you can get it from Happymodel Site

@alenbrk1368 2 ай бұрын

Thanks mate 👍

@burdfamfpv 3 ай бұрын

Nice video bro keep up the great work 💯 🫡

@grox3857 3 ай бұрын

Thanks! ;)

@juszczu17 16 күн бұрын

whats your googles aand setup on them? Im trying to get back to hobby with only tinywhoops and I am wondering which google should I buy to have decent video

@Braincho 2 ай бұрын

Hi. I'm very new to drones and especially to tinywhoops. I have Meteor65pro. But it feels too responsive and too edgy mostly for altitude/throttle. Should I fix/reduce some parameters or its only lack of skills to fly it smooth? What would you suggest? Thank you in advance!

@grox3857 2 ай бұрын

Of course! You can apply throttle and axis expo, it will smooth out the center, also lower your rates so exactly sensitivity will decrease. Later when you will gain more skill you can then raise rates and change expo to less. To maintain same altitude and not bounce is mostly skill factor and throttle control so also you can pratcice and just don't stop flying and you will get better over time :)

@_77LK 2 ай бұрын

Really cool bro! I'm not a pro, and I got a question I'm planning to buy hdzero google can Iink the googles with this camera? I'm still deciding about fatshark hd2. 1 or hdzero but sounds hd have more advantage? Thank you

@grox3857 2 ай бұрын

Hi! Pro? I'm not one also :) But HDZERO goggles are amazing, if you have money they are middle sweetspot between digital and analog. Very good for analog (Tdog is using them) And also of course you can go HDZero digital :) Only downside that they are pretty big

@_77LK 2 ай бұрын

@@grox3857 well you know how to build good drones, flying you're like a pro haha Well I'm thinking about these 2 googles, I already got a dji v2. I'm trying to decide between hd2.1 and hdzero, what you think? both are the same price I guess.

@_77LK 2 ай бұрын

@@grox3857 ohh I see, which one you recommend? I can see many quad using analog system and it's cheaper than hdzero system right, at the same time penetration with hdzero sounds bit lower than fatshark? Or should I wait until end of the year and stay just with my v2?

@grox3857 2 ай бұрын

@@_77LK HDZERO goggles are better than fatshark, because they can do both systems, digital at full 100FPS and Analog. If you have more money, go for the HDZERO goggles

@cold-frontin_penguin7902 2 ай бұрын

Just bought this exact setup im terrified of saudering it.

@grox3857 2 ай бұрын

If you are new with soldering, I recommend first to learn how to solder, and pratcice on small pads of other electronics, or broken fc's if you have some. This is important because you will reduce risk of doing bridges and burning vaulable stuff.

@cold-frontin_penguin7902 2 ай бұрын

@@grox3857 more flux is what I've been doing haha

@ramboaripratama1992 3 ай бұрын

broooo what battery u use? 3 min ++ fast flying so insane!

@grox3857 3 ай бұрын

Thanks! Not only baterry performance stand for this good result. Low weight, biblade propeller, bigger duct. Very very efficient build with good punch here. That's the reason why I made this tutorial❤

@grox3857 3 ай бұрын

Lipo used and power system with more details in description :)