grox

Пікірлер

@l2abbit 14 күн бұрын

What's the purpose of the pigtail? Sorry I'm new to the hobby.

@l2abbit 14 күн бұрын

It looks like you're using two batteries. What advantage does this confer over a single battery? what batteries are you using? thanks a ton <3

@juszczu17 16 күн бұрын

whats your googles aand setup on them? Im trying to get back to hobby with only tinywhoops and I am wondering which google should I buy to have decent video

@MrRichManGuy 20 күн бұрын

So cool! What do you think about doing 35mm props with 15000kv motors for even less weight and a smaller quad.

@georgepf 27 күн бұрын

Yesterday I almost lost my drone because the Jumper's batteries got loose, the controller lost power and dropped the RC link. It was just that metal tab you showed how to bend back. Lesson learned - before you fly, shake your controller to make sure it doesn't power off because of loose batteries.

@grox3857 27 күн бұрын

I wish you to see this video before that happened. You can subscribe to not miss out on useful tips and tutorials :)

@MrGaussFPV 28 күн бұрын

Brother, you're one helluva ripper - Definitely deserve WAY more subs. Stay up bro ✌️

@grox3857 27 күн бұрын

Thanks!! :)

@Y0n3z Ай бұрын

that voltage drop is pretty impressive, very steady and slow.

@grox3857 Ай бұрын

Yup, more tho with OLD lipos, current when hovering is only around 2A

@Aircraftdude Ай бұрын

Would you have the stl file for the case

@markbachman8321 Ай бұрын

Why only 2 screws mounting the motors?

@grox3857 Ай бұрын

In my tests with this tempo of flying no problems with durability, less weight.

@danialfpv Ай бұрын

Super setup, nice flying. Do you mind sharing your tunes and how do you set the launching mode 5:01 , thanks

@rirockzone Ай бұрын

Nice build. And strong pilot skills, that`s nice!

@grox3857 Ай бұрын

Thanks!! :)

@afiqzikry6782 Ай бұрын

for a beginner, what kind of drones you recommend for a start? Should i buy cheap E010 or anything else ?

@MrGaussFPV 28 күн бұрын

Before you spend a penny, get a simulator. Fly in a sim until it becomes a second language for you. Then go rip a real kwad. In the long run, it'll save you tons of time, frustration, and money.

@afiqzikry6782 27 күн бұрын

@@MrGaussFPV Thank you sir! I will take your advise.

@manwithgutz Ай бұрын

betaflight config video ?

@Braincho Ай бұрын

Also btw how do you make drone push up back side for a faster start?

@Braincho Ай бұрын

Couldn't find those 14k KV motors. Also what did you put in battery holder to make it right size?

@grox3857 Ай бұрын

Unfortunately yes, need to buy newer ice 0802 motors with similar kv

@grox3857 Ай бұрын

For baterry holder that is originally too big just sticked two pieces of foam and it does its job well.

@Braincho Ай бұрын

Hi. Find out today big problem. Hope you can help me solve it. Went to fly my Meteor65pro, but it didn't work. When plugged in battery the motors do the beep sound, but nothing else. ELRS receiver is not working, neither VTX. Betaflight or PC doesn't see the drone when pugged(can se other drones, cable/betaflight/drivers are fine). Not sure if it does anything to do with it, on my last fright it says heat alert 74*C, but I landed immediately. What could it be and what can I do to help it. Thanks.

@Braincho Ай бұрын

Wow, you are so pro... its hard to see what is going on there, but you do fly it omg. Would like to ask you an hardware question: I burned out FC on Firefly1.6 1s toothpick. But the boards are sold out around 6months already(AIO 5A board w/ built in VTX). What could I change it with - suggest pls.

@grox3857 Ай бұрын

I'm not a pro but thanks! Firefly have normal 5A esc aio, you can even replace it with Betafpv Cross, but then need to set it up and it will fly with no problem.

@Braincho Ай бұрын

@@grox3857 What do you mean by "normal" esc that firefly has? They used to sell same AIO board like my, but its out stock. By Cross Betafpv you mean to mix Betafpv board with the rest parts of my whoop? Flywoo AIO is w/ VTX onboard and separate Elrs, but BetaFpv AIO got Elrs built in and separate VTX. Will it still works if I get BetaFpv Vtx and AIO board w/ Elrs ?

@grox3857 Ай бұрын

@@Braincho "normal" that it have generic 5A esc"s used same on all whoops. You can go with BetafpvCross, and ovx300 this is best, most reliable, and lightest setup with separate vtx nowadays. Exactly what I'm flying right now

@Braincho Ай бұрын

@@grox3857 I see, thanks a lot. Was wondering is this BetaFPV AIO board is reliable, cuz just had a problem with my Meteor65pro, but if you say its good - will get one. Also a question about VTX; does BetaFPV M03 VTX bad compared to ovx300, cuz if I purchase AIO board from them would be nice to get in the same order VTX too.

@JND-FPV 2 ай бұрын

how do you lean forward like that?

@monkeytrident 2 ай бұрын

@grox I am new to fpv drones, I bought a TinyHawk 2, I dare not fly it, did you use simulation or went straight into flying, what is you're opinion, should I do simulation before flying in the open empty field ?

@grox3857 2 ай бұрын

I had at least 50H in simulator

@monkeytrident 2 ай бұрын

@@grox3857 Can you let me know which controls you use, left stick up/down left/right, and right stick up/down left/right cheers.

@grox3857 2 ай бұрын

@@monkeytrident Standard Mode2 wich is Throttle and Yaw for left stick, Pitch and Roll for right stick

@monkeytrident 2 ай бұрын

@@grox3857 What do you think if I buy a cheap brushed micro/mini/nano drove for like £20 and fly that in a open field rather then simulator perhaps this would work, what do you think ?

@grox3857 2 ай бұрын

@@monkeytridentOf course. Even my first ever drone more like a toy. For 10$ (furibee f36) Had a great time with it, learned throttle control and LOS orientation.

@El_Muffy 2 ай бұрын

What is the size of the squares you fly through?

@grox3857 2 ай бұрын

Regular square 45cm width and height but gates at the race events vary, usually from 30 to 50cm it depends.

@TheFpc20 2 ай бұрын

So awesome, it is a rocket 🚀 i have a mobula 7 v2, it has GEPRC SPEEDX2 0802 16000kv motors, do you think these could be good for same satup you have? I have the estock fc too, by the way could you please share prop specs, like what pitch those are, i need 40mm prop but not sure what to buy so would like to test the same you used on this build

@grox3857 2 ай бұрын

Props are gemfan 40mm they are very good on 2S High RPM with low pitch. Your motors are also pretty ok, so you can check if your FC supports 2S just change pigtail and send it!

@TheFpc20 2 ай бұрын

@grox3857 excellent, thank you so much, for the moment I have been just using 2s, I will buy the gemfan 1610 biblades to test them, do you think will be ok?

@grox3857 2 ай бұрын

@@TheFpc20 Yess, they spin MUCH faster on low pitched biblades, this is also the reason why I choose them over triblade, mentioned on the video also.

@TheFpc20 2 ай бұрын

@@grox3857 thanks!

@Braincho 2 ай бұрын

Hi. I'm very new to drones and especially to tinywhoops. I have Meteor65pro. But it feels too responsive and too edgy mostly for altitude/throttle. Should I fix/reduce some parameters or its only lack of skills to fly it smooth? What would you suggest? Thank you in advance!

@grox3857 2 ай бұрын

Of course! You can apply throttle and axis expo, it will smooth out the center, also lower your rates so exactly sensitivity will decrease. Later when you will gain more skill you can then raise rates and change expo to less. To maintain same altitude and not bounce is mostly skill factor and throttle control so also you can pratcice and just don't stop flying and you will get better over time :)

@Braincho 2 ай бұрын

Amazing!!! Mega pro work and explanation!!!

@grox3857 2 ай бұрын

Thanks!!

@AhojAhojty 2 ай бұрын

How much it cost?

@grox3857 2 ай бұрын

BETA F4 AIO: 40$ OVX300: 28$ SE0702: 30$ C03: 20$ 65PRO FRAME: 5$

@AhojAhojty 2 ай бұрын

Hi can you pls help me choose the best cheap racing tini whoop, controller, fpv glasses and other things what you need to start with fpv? (I dont want slow drone)can you please help me???😢

@grox3857 2 ай бұрын

I made full tutorial how to build racing tinywhoop, also one in that video! You can check it out on my channel ;)

@grox3857 2 ай бұрын

For now best price to quality goggles are skyzone cobra plus radiomaster pocket

@AhojAhojty 2 ай бұрын

@@grox3857 which video you think

@grox3857 2 ай бұрын

@@AhojAhojty kzfaq.info/get/bejne/jq2jpNimuJm6oIE.html&ab_channel=grox

@AhojAhojty 2 ай бұрын

Do you need some different like baterries or some like that?

@thomasrc6445 2 ай бұрын

Where did you get the camera mount?

@grox3857 2 ай бұрын

3dprinted, model from thingiverse

@thomasrc6445 2 ай бұрын

Where to get the camera mount?

@grox3857 2 ай бұрын

It's 3D Printed from rubber, from free thingiverse 3d model

@PhobosYT 2 ай бұрын

That's why sometimes I feel like I enjoy trainings more than competitions, you can fly more, less pressure, less technical issues and midairs, it's just awesome!

@grox3857 2 ай бұрын

Exactly :)

@TheRedMati 2 ай бұрын

Solid laps, and great song choice 😜

@grox3857 2 ай бұрын

Thanks! ;)

@balc3r 2 ай бұрын

Zaje!!!

@morganw6357 2 ай бұрын

Niezłe się niesie dźwięk od silników ❤

@_77LK 2 ай бұрын

Really cool bro! I'm not a pro, and I got a question I'm planning to buy hdzero google can Iink the googles with this camera? I'm still deciding about fatshark hd2. 1 or hdzero but sounds hd have more advantage? Thank you

@grox3857 2 ай бұрын

Hi! Pro? I'm not one also :) But HDZERO goggles are amazing, if you have money they are middle sweetspot between digital and analog. Very good for analog (Tdog is using them) And also of course you can go HDZero digital :) Only downside that they are pretty big

@_77LK 2 ай бұрын

@@grox3857 well you know how to build good drones, flying you're like a pro haha Well I'm thinking about these 2 googles, I already got a dji v2. I'm trying to decide between hd2.1 and hdzero, what you think? both are the same price I guess.

@_77LK 2 ай бұрын

@@grox3857 ohh I see, which one you recommend? I can see many quad using analog system and it's cheaper than hdzero system right, at the same time penetration with hdzero sounds bit lower than fatshark? Or should I wait until end of the year and stay just with my v2?

@grox3857 2 ай бұрын

@@_77LK HDZERO goggles are better than fatshark, because they can do both systems, digital at full 100FPS and Analog. If you have more money, go for the HDZERO goggles

@user-wt5hi1ep3d 2 ай бұрын

Coole Location and track👍👍👍

@kirek_fpv 2 ай бұрын

Jak zwykle zajebiscie :)

@knitterfpv5525 2 ай бұрын

Very good edit 🔥🔥🔥 nice

@qwadimodo1998 2 ай бұрын

Nice 🔥

@josetorres6127 2 ай бұрын

🔥🔥really good video. Keep it up

@kur4sawa 2 ай бұрын

Awesome! I see with the closed door was definitely a better view) We were needed to fly in the dark(

@pavelfpv1280 2 ай бұрын

Amazing!!! Best video and edit of this race I've seen. Me in your video?😮 How?! Thank you so much! I will never forget this experience. Hope to see you again. Whoop is the way!

@grox3857 2 ай бұрын

Thanks! I also wanted to add your freestyle dvr but my goggles were not recording :\ Very nice skill and Racing also fast :)

@kirek_fpv 2 ай бұрын

@@grox3857 I've all freestyle dvr.. My gogles was on and recording whole time 😅 better ask next time!

@ThePrintZone123 2 ай бұрын

Hey can someone plz help me, will a flysky fs-i6x work with this? or would i need a different flight controller

@grox3857 Ай бұрын

Yes you need flysky controller AIO, or can solder flysky nano reciever to existing one

@cold-frontin_penguin7902 2 ай бұрын

Just bought this exact setup im terrified of saudering it.

@grox3857 2 ай бұрын

If you are new with soldering, I recommend first to learn how to solder, and pratcice on small pads of other electronics, or broken fc's if you have some. This is important because you will reduce risk of doing bridges and burning vaulable stuff.

@cold-frontin_penguin7902 2 ай бұрын

@@grox3857 more flux is what I've been doing haha

@alenbrk1368 2 ай бұрын

Thanks for the detailed Explanation! Nice build! Just one Question: Do you need to set the VTX Table or you just use the FC Betaflight settings it comes with?

@grox3857 2 ай бұрын

Yess, ovx300 vtx table is opensource and you can get it from Happymodel Site

@alenbrk1368 2 ай бұрын

Thanks mate 👍

@LeshaRodin 3 ай бұрын

Im flying this same build for almost a year with same 1610 biblades cutted to 35 but with hdzero. its great

@humbertocortes68 3 ай бұрын

Will be better if you put de links of purchase of the components....😊

@Greenhorn_FPV 3 ай бұрын

I want that flight controller soldering stand!!! 😍

@megamanconrad 3 ай бұрын

Nice build dude

@para9111 3 ай бұрын

UR still learning?Like for what Master Apprentice Jedi?Nice flying man.

@h2o40fpv 3 ай бұрын

Great video thank you.

@theagent578 3 ай бұрын

The level of control you get with these whoops is insane. Great build video.

@grox3857 3 ай бұрын

Thanks! Just keep flying bro❤

@derecktaitt8457 3 ай бұрын

Nice build enjoyed every minute looking forward to more in the future 🔥

@ramboaripratama1992 3 ай бұрын

broooo what battery u use? 3 min ++ fast flying so insane!

@grox3857 3 ай бұрын

Thanks! Not only baterry performance stand for this good result. Low weight, biblade propeller, bigger duct. Very very efficient build with good punch here. That's the reason why I made this tutorial❤

@grox3857 3 ай бұрын

Lipo used and power system with more details in description :)

Ең жақсы KZfaq

Пікірлер