Installing a lower AN Radiator hose and an AN heater hose, without welding? AutoPlumb

No video

Installing a lower AN Radiator hose and an AN heater hose, without welding? AutoPlumb

Рет қаралды 28,580

Күн бұрын

How to install an AN Radiator Hose on your Musclecar. No Welding Needed! AutoPlumb
It's time to convert my lower radiator hose to AN Style, as well as my Heater hose input into my timing cover, hopefully without welding, by utilizing AutoPlumb fittings. We shall see.. We're on the tail end of my engine rebuild, if you missed it, check out the engine tear down episode... the bearings were toast! In this episode, "Installing a lower AN Radiator hose and heater hose conversion, without welding? Pontiac Re-build part 14", is the final step before firing this new rebuild for the first time. Sorry, I love AN Fittings, and AN hoses, because they look awesome, and don't leak! Follow along with the Pontiac 400 (Now a 470) engine installation, by subscribing below;
Subscribe by clicking this link; kzfaq.info...
This channel is all about muscle car how to's and what to watch out for, when working on your own car. Also fresh off of installing a New TREMEC TKX from Silver Sport Transmissions, and a FiTech fuel injection system. Subscribe to watch more projects on this built, not bought, 1969 Pontiac GTO.
NEW! FMG MERCHANDISE available! Here's the online store for shirts (pick a color), and face masks, (Grey, Black, or Red) fmgmerch.threa...
Part's and/or supplies used in this video series;
AutoPlumb Mock Up templates; autoplumb.com/...
AutoPlumb "Weld Less" water neck conversion kit;
autoplumb.com/...
AutoPlumb Comination Size 20 AN Wrench autoplumb.com/...
AutoPlumb, size 20 AN hose; autoplumb.com/...
AeroFlow Non-Stick Cutting Tape; autoplumb.com/...
AeroFlow Large AN Vice Jaws autoplumb.com/...
Size 20 AN Hose Ends:
autoplumb.com/...
Weld in AN Bungs;
The -20 is www.summitraci...
The -10 is www.summitraci...
Swag Offroad Portaband vice conversion;
www.swagoffroa...
Here's the Top Radiator Hose video; • How to install an AN R...
Here's the latest Walk Around of the GTO, filmed by RestoMods.com • A Walk Around of my "B...
Playlists of interest;
Hydraulic Clutch and Tremec TKO/TKX install;
www.youtube.co....
FiTech Fuel Injection Install;
www.youtube.co....
Here's the original Hydraulic Roller Lifter Fail Inspection, and process:
• Something is still WRO...
Here's the Official Part 1, where Mike starts the preparation of Engine removal
• Pontiac V8 Camshaft Re...
Here's the start of the TREMEC installation, • How to install a Wilwo...
#GarageBuilt #Pontiac #DIY

Пікірлер: 83

@fastkelly2602 3 жыл бұрын

Congrats Mike! You are taking DIY upgrades to the next level without leaving the rest of us behind! There shouldn’t be a price on learning. Thanks for sharing!

@FastMonty 3 жыл бұрын

Ha! Thanks Kelly... as you noticed, I excel at learning what not to do. ha, ha... but, that's how we all learn the fastest. Thanks for the comment!

@FullDetailAutomotive 4 ай бұрын

i know this video is 2 years old but when inserting a hose into an AN nut, rotate counterclockwise and it will walk itself into the nut. just forcing it in like that works but the nut is designed to have the hose "threaded" in. thats what those grooves on the inside of the nut are for. great video btw

@FastMonty 4 ай бұрын

Well... not exactly. While twisting AND pushing does help, those internal grooves are not threads, they're retaining grooves that hold the hose in. In my second version of this video, I added another step and that's to heat up the nut with a heat gun, while pushing/twisting the hose in. Thanks for the comment!

@jasont.1530 2 жыл бұрын

Just a tip in the event you experience overheating under aggressive driving. Many older cars had springs inside that hose to prevent the hose from collapse when pulling really hard at high RPM. I had this exact problem on my 72 cuda. Nice work on the video man! Sweet goat too!

@FastMonty 2 жыл бұрын

Totally agree, Jason. Thanks for adding the tip. Yeah, a collapsed hose does no good. ha, ha... thanks for the compliment, and the comment!

@bobmendel9697 6 ай бұрын

Looks great!!! Looks like you forgot to lube the the split bushing behind the rubber seal!

@FastMonty 6 ай бұрын

Thanks! I need to lube it? LOL

@johnkennedy8452 3 жыл бұрын

As long as you have been doing your videos you have gained all that experience. In fact you should have Pontiac running through your veins. So no need to be nervous , You got this.

@FastMonty 3 жыл бұрын

Thanks John! We shall see!

@JuanPerez-kd2ue 2 жыл бұрын

Great Great Great....I just order my NA fitting from autoplum never heard of it thanks to the guy that is sharing this video... p.s I need it the radiator hose and I'm doing NA fitting all over my chevy Nova 77

@FastMonty 2 жыл бұрын

Great to hear! I love AN fittings... as you can tell from my video. ha, ha... have fun!

@jtmunn4496 3 жыл бұрын

I feel bad I haven't watched a video in a while. But I must say the videos are getting way better.

@FastMonty 3 жыл бұрын

Ha! Thanks JT... welcome back.

@177SCmaro Жыл бұрын

Thanks for pointing out Autoplumb. I have a weird motor swap and was looking to upgrade to AN lines because they look a lot better than my home-made set up that is difficult to get to seal perfectly all the time. This is a much better way to do it.

@FastMonty Жыл бұрын

Awesome! Glad I could help... have fun!

@loganshotrod4x464 8 ай бұрын

Excellent video! Thanks for the recommendation & information! 👍😎

@FastMonty 8 ай бұрын

Welcome! Hope it helps!

@geraldfiorello6231 2 ай бұрын

Awesome job looking great

@FastMonty 2 ай бұрын

Thanks Gerald!

@Purpz710 2 жыл бұрын

Life saver. Helped me with my turbo ls

@FastMonty 2 жыл бұрын

Awesome!

@SidewaysTA 3 жыл бұрын

Looks beautiful Mike. Excited for you bud. Get her fired up and on the road!

@FastMonty 3 жыл бұрын

Thanks Brother! Me too!

@brycemaggio6144 3 жыл бұрын

This is so rad! I have to do this to my car

@FastMonty 3 жыл бұрын

Ha! Thanks Bryce!

@boostjunkieMike Жыл бұрын

Awesome 👌🏾😎 well done.thanks for sharing. I think I'll be converting alot of my fittings on mustang to an fittings. ❤ the clean look

@FastMonty Жыл бұрын

Ha! Yup! AN Fittings are addictive!

@johnnyteunissen7707 3 жыл бұрын

Great DIY Mike!! I'd like to tackle this upgrade on the Tempest someday. May start with the upper first as I'm thinking it may be easier. Thanks and keep up the great work!

@FastMonty 3 жыл бұрын

Thanks Johnny, yeah the Top hose is way easier. But, definitely use the hose cutting tricks in this video, as I didn't know about the Heating of the Hose trick in my top hose video. And of course, reach out if you ever have any questions. See you soon!

@billmiller5075 3 жыл бұрын

Great information Mike, can’t wait to hear it run

@FastMonty 3 жыл бұрын

Thanks Bill... me too!

@stevenb3027 3 жыл бұрын

I have to say i am impressed on your effort! maybe Butler or kaufman would take on the timing cover AN fitting as an option i think its great! keep the good work up

@FastMonty 3 жыл бұрын

Ha! Thanks Steven... I especially love the heater hose fitting.

@domaleons 2 жыл бұрын

Very nice demonstration and install! Looks very clean. You gave me an idea for my GTO. I love the weld on option.

@FastMonty 2 жыл бұрын

Thanks Brother! Glad I could inspire some more ideas for your GOAT! Can't wait to see it back on the road.

@TheAlphamullet 2 жыл бұрын

Thanks for the video....I checked out the website and will be doing this on my next build!

@FastMonty 2 жыл бұрын

Awesome! Glad I could pass along some design ideas... have fun!

@dboy3535 6 ай бұрын

Worth the time 👍🏾👍🏾

@FastMonty 6 ай бұрын

Ha! yeah, I love it! Thanks.

@Twistedzlone 13 күн бұрын

So basically weld them instead 🤣 good work

@FastMonty 12 күн бұрын

All about learning, right?

@Twistedzlone 10 күн бұрын

@@FastMontyyou did good, I was contemplating doing something like that but I worry about space.

@FastMonty 9 күн бұрын

@@Twistedzlone Yeah, I hear you... It took me a couple times to get the hose length perfect. Have fun!

@MattM72301 8 ай бұрын

You’re awesome man thank you

@FastMonty 8 ай бұрын

Welcome! Thanks for the comment!

@xoxo9623 Ай бұрын

always cut the video at the difficult part and make it look easy 17:48 and 19:20

@FastMonty Ай бұрын

Ha! 10 minutes of me swearing doesn't help anyone. In both instances I said It's not going to be easy. Thanks!

@JMAGG Жыл бұрын

Do you have to worry about the hose collapsing in on the lower radiator hose? My lower hose has a spring in it.

@FastMonty Жыл бұрын

Nope, it's much more sturdy than a standard hose.

@rosewd2 11 ай бұрын

Are you using urethane engine mounts or a torque strap? I would think when the engine moves/flexes that lower hose is going to break?

@FastMonty 11 ай бұрын

It's flexible. I think Autoplumb mentions you need a minimum of 6" of hose. I'd double check with them, if you're going to do this mod. Thanks.

@johnk7201 3 жыл бұрын

I was wondering how you planned on sealing the orb fitting for the heater hose neck on the timing cover, the oring needs a tapered seat to seal?

@FastMonty 3 жыл бұрын

Thanks John, that's a fantastic question. If I'm not mistaken, the ORB O-Ring just needs a flat surface. BUT, I could be wrong... Luckily, I didn't go down that path to find out. ha, ha... Next time I take apart one of my other O-Ring fittings, I'll have to pay attention to that mating surface. Thanks for pointing that out!

@johndoe-zd9lb Жыл бұрын

i hope you have solid motor mounts, if not wont the rocking of the motor rip that apart over time?

@FastMonty Жыл бұрын

Good question.. I do have "stiff" mounts, but there is some compliance with the hose, and joint. No worries for me. Great point.

@TheProcustoms Жыл бұрын

without welding while you weld both water pump fittings. The water pump end is my concern, I watched the top hose video and got hooked on the lower Idea. I have a custom polished aluminum tube for top. Will be on SBC mechanical aluminum pump. Did you go back and heat the top fittings to see if they compressed more?

@FastMonty Жыл бұрын

Great question... No, I did not go back and re-do the top hose. But, my next video I'm changing the radiator hose, so yes, I'll be doing it correctly. Lol. Thanks for the awesome comment!

@brettwarwick285 3 жыл бұрын

Nice work. I am trying to emulate your work. I have a 69 firebird with copper radiator that is kind of weepy. Looking for a top quality radiator to replace it. Any recommendations?

@FastMonty 3 жыл бұрын

Awesome Brett... yeah, Cold Case, or Be Cool. either one. Obviously I highly recommend Dual Electric Fans. have fun!

@pgp1966 3 жыл бұрын

Awesome work Mike, going to do this too. What did you use on the other end of the heater hose at the heater core on the firewall, just normal hose clamps?

@FastMonty 3 жыл бұрын

Thanks Paul... you might have missed it, I just used a Hose Barb to - 10 AN fitting, to attach to the remaining hose. (My hose goes under the fender to the firewall, so, really tough to get at it) Thanks again!

@FastMonty 3 жыл бұрын

Be sure to subscribe for more, click here; kzfaq.info Get your FMG hat, three color combos to choose from, check em out here; www.etsy.com/shop/fastmontysgarage

@ScaleModelAddicts 2 жыл бұрын

This is probably a dumb question, but I’m planning on buying these AN adapters for my coolant system and I’ve run into a dilemma. The bottom pipe on my radiator measures 40 MM, or 1.575 Inches. Autoplumb’s nearest adapter says it will fit 1.525”-1.550”. Do you think I can purchase that nearest size adapter and modify it to make it fit? For some reason the next size up is 1.750”-1.774”, which seems way too large. Could I modify this one to make it fit? Thanks in advance!

@FastMonty 2 жыл бұрын

No such thing as dumb questions here... ummm, well, maybe there are. But, yours is not. Ha, ha... In my opinion, NO, you can not modify the next closest adapter. It's a very well toleranced machined piece, and I wouldn't modify it. That said, have you asked Autoplumb directly to see if they're going to release any new sizes? Keep us posted!

@Gloccthejocc Жыл бұрын

Do these fittings work well under pressure or did they eventually leak

@FastMonty Жыл бұрын

Still working great! Thanks.

@markwestcott6866 3 жыл бұрын

Can you add part numbers for the pieces you welded to the timing chain cover ???

@FastMonty 3 жыл бұрын

Good point Mark... The -20 is www.summitracing.com/parts/icb-an970-20a and the -10 is www.summitracing.com/parts/icb-an970-10a Thanks!

@stasethridge6619 8 ай бұрын

I have a Japanese car where would I find the size for my radiator?

@FastMonty 8 ай бұрын

Not sure... does that mean your radiator is plastic? Might have to do some measuring, then contact AutoPlumb to see if they have anything to help you out. Good luck!

@Dirtywhiteboy118 Жыл бұрын

How were you able to weld the timing cover ???

@FastMonty Жыл бұрын

What do you mean, how? With a TIG welder?

@63grandsport11 Жыл бұрын

Whos rad hose did you use. Was it AN20 ?

@FastMonty Жыл бұрын

Yup, it's an AN20... all the part numbers are in the description. Have fun!

@billmiller5075 3 жыл бұрын

Mike what brand of head gaskets did you use and thickness? Thanks

@FastMonty 3 жыл бұрын

Random question... ha, ha... I'm using Butler Performance gaskets, which have a .045" crush height. butlerperformance.com/i-24453584-butler-performance-pontiac350-400-428-455-head-gasketset-2spm-19374-2.html?ref=search:https%3A%2F%2Fbutlerperformance.com%2Fsearch.html%3Fq%3Dhead%2Bgasket

@josephnappi8561 3 жыл бұрын

Thank you another great and informative video, I'm having a hard time finding the black-20 an hose ,auto plumb only goes up to -16an where did you get your hose from?,thanks

@FastMonty 3 жыл бұрын

Welcome, and thanks... I got it from AutoPlumb. Here's the link. autoplumb.com/collections/20-an-hose-by-the-foot/products/aeroflow-20an-black-nylon-stainless-steel-braided-hose

@leco4l 2 жыл бұрын

Hey bud hope everything is well question for you I have purchased the autoplumb adapters as well...... I have not installed mine yet how are they holding up are you satisfied with them

@FastMonty 2 жыл бұрын

Yeah, man! They're holding up great... be sure to use the Heat Gun trick to get those hose ends screwed on all the way. Have fun!

@leco4l 2 жыл бұрын

@@FastMonty hey man thanks for responding back and thank you for the info can't wait to use mine....... have fun with your build

@FastMonty 2 жыл бұрын

@@leco4l Welcome... you do the same!