BMW Control Arm Replacement (Arm & Bushing E46)

Рет қаралды 48,519

11 жыл бұрын

►Shop the Site: hubs.ly/H0cH3qX0
SUBSCRIBE: hubs.ly/H0cDnfN0
Lost in the archives we're back with Zach Miller (millertimebmw) to walk you though a complete control arm replacement on an E46 BMW.
While you're clicking around make sure you check out Zach's great channel and his repairs over here: / millertimebmw
BMW Control Arm Kit (325xi 330xi E46) - Lemforder E46CAKITXi
www.fcpeuro.com/products/bmw-c...
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com

Пікірлер: 35

@fazalabbas 10 жыл бұрын

First of all thank you very much for sharing and making such an easy thing that this ease motivated me to do it myself. This was my first time and it took me around 6 hours from start to finish. However, there is one VERY VERY important piece of information missing. When you put new bushing on the control arm then it is directional. Make sure that you insert correct side in. I learnt the hard way and that why it took so long and I was extremely frustrated at that time. I had to take off the bushing from control arm and had to put back the other/correct way and I damaged the bushing. I had another bushing handy too but I was too tired and just wanted to put back everything together.

@melissaiodice1752 3 жыл бұрын

Thanks for this vid now I think I can replace mine myself.

@fcpeuro 3 жыл бұрын

happy to help instill the confidence! We think you can too

@fcpeuro 11 жыл бұрын

We've added it to our list and we'll complete it just as soon as we can!

@mattz2386 9 жыл бұрын

Thanks for the vid. It ended up being an easier job than I thought it would be. I removed and installed both sides with no problems.

@nemo4270 10 жыл бұрын

Great post! I bought all of the Lemfoerder parts I needed from you guys and just followed the instructions on this video. My son and I did it in a couple of hours. Easily the most difficult part was getting the old bushing out of the bracket and getting the new one in. Thanks for the video.

@davidle7063 10 жыл бұрын

Hi Ne Mo, would you please share some tip how to remove the old bushing out and press the new one in without a fancy pressing machine? Thanks.

@MegaDan991 7 жыл бұрын

Thank You for making this video!

@fcpeuro 11 жыл бұрын

It's on our list!

@fcpeuro 11 жыл бұрын

Check our channel, we've got a sway bar link video for an 850, the process is very similar. Hope that helps!

@fcpeuro 10 жыл бұрын

Yup you found em, just verify the fitment for your exact vehicle and you're good to go, let us know how it works out for you.

@guymadison439 10 жыл бұрын

Thanks for sharing this

@geraldobergamini2893 11 жыл бұрын

Parabens .. Muito instrutivo e facil.. Muito obrigado Geraldo

@Wavecruzer79 10 жыл бұрын

Great quality video guys! I'm getting all sorts of squeaks on my front and rear (95 E36 M3) 120k on it. H&R springs Bilstein struts lowered. I know I need to replace the rear shock mounts with something heavy duty. What do you suggest I replace on the front or additional in the rear? I would love to have it super tight and no squeaks. Thanks!

@davidle7063 10 жыл бұрын

For regular DIYers, we don't have the fancy pressing machine, please give a link or any advice how to press the old pushing out and press the new one in? Do you think a huge C-Clamp works?

@egegg5916 5 жыл бұрын

Can you please let me know what size jig or socket you used on the press to push out old bushing in lollipop?

@325xitgrocgetter 11 жыл бұрын

Do you have or are planning a video on replacing the front struts on an E46 xi?

@Guanakito503fcb 6 жыл бұрын

Can you ise sillicone grease to push it in?!! Please reply

@lexusfan100 11 жыл бұрын

can you do a volvo S60 or S80 anti sway bar link change

@samuelvargas7933 5 жыл бұрын

¿I can still use the same brackets?

@dog2bert 5 жыл бұрын

Was this an AWD car?

@Guanakito503fcb 6 жыл бұрын

Do they have a specific side to which they mount or it doesnt matter which side???

@RepairDude 5 жыл бұрын

Yes theres a left and right part

@steamderrick 10 жыл бұрын

planning on doing this my son's e46. What size is ratcheting / flex head box wrench ?, as I am going to have to get one.

@fcpeuro 10 жыл бұрын

Depends on the exact model, but here's a complete list of the tools you need. i models (RWD) 2 jack stands Torque Wrench Philips Head scewdriver 16mm socket 19mm open ended wrench 22mm open ended wrench 22mm socket Pickle Fork 3 lb hammer xi models (AWD): 2 jack stands Torque Wrench Philips Head scewdriver 16mm socket or wrench 18mm socket or wrench 23mm socket or wrench Pickle Fork 3 lb hammer

@steamderrick 10 жыл бұрын

FCP Euro Thanks, just needed to be sure of the size of the flex/ ratchet head box wrench. Haven't bought a set yet, but ordered them today.

@Magicstockton 5 жыл бұрын

🏆

@manauryreyes7262 7 жыл бұрын

i don't have Access to a machine shop where they can pop the bushing out. Can I just buy a bushing with the bushing bracket?

@fcpeuro 7 жыл бұрын

Hello Manaury, the bushings will need to be pressed in on the XI all wheel drive models, the rwd E46 models don't require the bushings to be pressed in.

@manauryreyes7262 7 жыл бұрын

I find it to be so messed up! like why can't they just come already in with a new bracket like the rwd bushings do. they charge $80 here where i live just to get them pressed in. smh

@dcanon 10 жыл бұрын

What size is the flex wrench that you used?

@fcpeuro 10 жыл бұрын

I believe it was a 14mm.

@the_ian 8 жыл бұрын

It's 16mm, in the video if you pause it at the right time you can see it. Pelican Parts DIY confirmed.

@Wavecruzer79 10 жыл бұрын

I actually found these right afterwards...looks to be everything I could need to do an overhaul. fcpeuro.com/products/bmw-control-arm-kit-8-piece-e36-heavy-duty-e36cakitmy fcpeuro.com/products/bmw-shock-mount-kit-rear-e36-e46-e36e46mountkit