For anyone wondering about how I setup the pedals check this out - kzfaq.info/get/bejne/gtV9n7eLm7bTpnU.html

Just ordered twin sticks, cant wait to properly get started

I appreciate this video well done! Just got the joystick setup to learn how to run Cat control (ISO) for an excavator. I am used to Backhoe controls or SAE. Thought it would be cheaper to learn virtally than waste time in machine. Great video!

You efforts and work are appreciated, thank you! Looking forward to a skidder to complete the collection.

I got the side panel for christmas, my wife loves me LOL. but I kinda wish I would have asked for these instead. They look like they would make the new platinum expansion ALOT more fun LOL. The single joystick is still leaps and bounds over Mouse and KB though. Thanks for the content

Thank you so much the control settings are amazing bud!

I have two joysticks being delivered today because I've been watching your videos , cant wait to get them set up

hi can you use just one joy stick or do you have to use both to use your mods

Sweet as I'll have to go try setting up my joysticks like this

i feel like you're missing a bunch of controls? how do you cut, move, turn things on ect

I'm running the Logitech extreme pro 3d sticks. Any tips on how to setup for other games? Having trouble finding a user friendly program

Another perfekt Video. Best Man on Earth! Amazing Maschines that i only use. Since FS17^^

I have a single joystick any recommendations or should I just use modifiers

Hi Mr FDR, just wondering if you have tried adding a plow function to a grapple.... bear with me haha Perhaps it would help penetrate the rock hard physics and allow more ease of grabbing logs off the ground........? PS love your mods and content!

Great video. Can't wait when it will be all shared :) However, i think there are additional settings to be changed - the axis deadzone, which by default is set to 14%

Hey Jordan anyway you can explain how you have the tool activations set as far as tool activation? i had found them before but i cant find that set of key bindings i had as now im on a new PC. Thanks bud and loving the new mod updates. hype for the release coming up.

so i did exactly like you said however for me instead of all keybind inputs were on both side since i have both my joysticks on, went to play and nothing is worklng. any recommendations. i also deleted everything and only followed on what you said

How to set up the pedals? I have bought the one on your site, are they only for steering

wish I can give you another thumbs up I use your vid as a dictionary in case I have to reBind my input bindings after giants updates unexpected!! unbelievable B.S. thanks bud I rant a little bit lol

So do you use keyboard and mouse, or steering wheel to move forward, steering etc?

What Pedels do you use and how do u set them up with the joysticks?

thank you do the video. not sure if anyone else is having the issue where if i close my game i load back on my controls are gone

can both joysticks be used simultaneously? or will it only detect one input at a time?

Hey, Thanks so much for the video, I'm going to have so much fun playing once I've got my joystick set up. I do have one problem though, Button 10 is bound to 'Open Menu' is there a way to change this, FS22 setting won't let me!

Fantastic tutorial tanck you ☺️

Hmmm... I am just now getting into the logging side of FS22 and am wondering, before I mess around too much and screw up my game ( 🙂), Can you run a G29, Heavy Equipment Panel from Logitech and also a joystick ( I have the Turtle Beach Velocity One and also the Logitech Extreme 3D) or will the game go nuts and get confused? The one joystick on the equipment panel just doesn't have enough X,Y and Z axis's for all of the controls. Thanks in advance to anyone who can lend some advice/info and happy farming!

Ok what button closes the arms on the processor? i've tried messing with anything

what are the other button mappings for moving around and other general things

THX a lot for this Video Jordan! 👍👍👍 It is very much appreciated! I just got the Thrustmaster 16000 set and is ready to configure it as you recommend. 😉 I have a question about the setup: In the latest version I DL from your site, there is four points without assignments: 25, 26, 27 and 28, guess that this video is from before you added this, so which buttons would you recommend to them? And what about the Tigercat 635G Skidder? do I need to assign buttons to that or will the other settings work? Best regards Bossen aka Mogens from Denmark

Verry nice vidéo... Thx

Id love to see a buncher head with the shears, they all seem to have the rotating saw blade.

on fs19 i'm waiting on mods for 22 and I can't get my joysticks to work I can put in the keybinds in using the mod but if I try moving the stick it don't move if you know how to fix it tell me or make a video about this

Having a issue with my forward and backwards using the same control u used for TELE IN and out but I don’t have that set. Still won’t work

so these are accurate to real life? Ive never run all these machines but there in my line of work and dont want to learn the wrong controls.

Awesome!!

i seem to not have fdr controls in my mods folder. where would i get that folder

Nice video but ur left joystick pov top and bottom was assigned to grapple claw and tele arm in and out.will that counter each other out ?

How do you keybinds the cut tree onto the joystick?

is there a special application for using 2 joysticks to 1 PC?

Hey I have the thrustmaster dual joystick setup. And I'm wanting to do excavating. I can set up in the game for Crane. But it won't let me apply buttons for the Excavator do I need the FDR mod for the excavator to work?

It doesn't work like this for me with the logging machines, is there something else I need to do?

What joysticks should I buy?

Do you have bindings for Tilt level cab forward/Back? Thanks for the many awesome videos.

Hey!! I have one question, does any one know why when I launch the game on epic games all my setting reset to default. I do everything right Save the settings. Then close the game and they reset

do those bindings work with full harvesters from ponsse etc too?

does this also work for normal vechiles?

Hello, nice Video. 2 little Problems i have with the Bindings, first the Cuttingfunction (X) is not incuding in the Bindigs and with the Tigercat the Claw open and close does not work. I have the same Joysticks like You and the Bindings setted like shown in the Video. Sry about my bad English, hope you understand what i mean

It would be cool to have a video on how to set of these up with a T16000 as a second joystick. This way I could utilize it well without having to spend another $99

Do those controls work out with the stock machinery in FS-22 or do you have to set those up seperately? Also, does toggling the left/right hand control switch on the bottom of those sticks do anything as far as this game is concerned? I know it affects the input as far as the joystick software is concerned but I don't want to go messing with anything if it doesn't need to be. For now I only have one of those TM-16000 but plan on getting a second.

Will this work on an Xbox with an xbox adaptive controller

will this work for excavators too

I've been looking into configuration of USB game devices for a bit and here is what I've found out: 1. The USB standard says the device should have a VID ( Vendor Id) and PID ( Product Id). It also allows for a serial number. The problem is that some vendors don't implement a serial number and I suspect some games don't look for it. As you see in this video, both joysticks have the same name. The only way the game can tell which is which is by the associated port number, where its plugged in. You have to make a note of which joystick is plugged into which port or you can get them swapped. The really frustrating thing with the TM16000's is there is a switch on the bottom of the stick which can be set to Left or Right and its setting is software detectable, somewhere. All Thrustmaster had to do was have the PID change depending on the switch setting, model names of T16000L and T16000R comes to mind for some reason, and we'd be golden. Serial number would also be a good idea. 2. You can do configuration in the individual game, as the video demonstrates or you can use the software that the device manufacturer may have created. For instance Thrustmaster has T.A.R.G.E.T. and Logitech had G-Hub. These allow you to program what the buttons do by making the game think it is getting an event from something else, a keyboard for instance. So if you can't bind an action in the game to a button but there is a way to do it with the keyboard, you use the manufacturer's program to send the same key sequence when the button is pressed. The problem is each manufacturer only supports their own devices and some games don't map all actions to keypresses. You also need to learn multiple ways of programming the same thing since the user interfaces are different. I will be checking out Virpil's software, it may support other manufacturers but I don't know yet. 3. Finally there are several third party programs that try to support some or all devices. The one I am currently experimenting with is Joystick Gremlin.

I have 2 t16000m joysticks and I'm just waiting on a second mount so I can start getting into logging, just wondering how you accelerate and turn with the joysticks?

Will the mods work without the joysticks?

hi im on your discord. I have duo 1600m and followed your how to install mod and this vid and did the same however now i cannot controll machines at all it still doesnt work. any suggestions?

i have the same sticks. but the right slider sends me up and down when I'm in map. i donno how to stop it

These controls only work with the FDR mod equipment, is that right?

when i download the mods, install how the videos say, nothing pops up in game and idk why

Hi I just have a question how do you say it it to a certain button can you please do another video and show us

Ok I have a question for you FDR what are the controls for the tilt level cab forward an back, processor saw raise an lower?

I’m using the same joysticks and when I press escape to look at the map, the map scrolls all the way to the bottom. When I unplug my joysticks I don’t have that issue. Is this something you’ve experienced/do you know of any fixes? Thanks!

Hello, I need help to set bindigs for fs17 i just need for standart ponsse

could someone use dual farming side panels instead?

Do flight sim ones work?

Where did i get the fdr control mod ?

do you use flight pedals to move or regular pedals or keyboard?

Where do you go to set up the controls? All my crain controls work fine for any equipment except for yours. It is like all of your equipment is under something besides crain controls. If anyone can give me some advice that would be great.

How can I set it up for mouse and keyboard

iv got some questions , 1. using this setup will it be the same when using an excavator? and 2. can u still have the gamepad inputs left " as is" to allow the use of driving other vehicles like trucks and dumpers for mining ?

I'm trying to setup controls on a PS4 Joypad, but most controls doesn't work. Is there a tutorial for joypad?

how can i move the boom with out the joysticks

hi super cool video you made. about very easy and do after .. but I have the proplem I do not have the mods called f22_FDR_control_inputs .. where do you find it. best regards Thomas

I guess its impossible to play FDR mod with keyboard controls then? Or atleast like in vanilla's controls wherein you can hold a mouse button and move your mouse in its x or Y axis

How do you set up the petals

Any way of doing this one Xbox one?

Does the controls mod only work for frd equiptment? Or basegame as well?

Muito interessante podia mostrar mais do cabeçote

Can this be done on Xbox one

I have the exact same joysticks and have set up the same but they won’t work

can the mods use a keyboard?

Is it totally required to spend at least 200$ on a joystick set-up to play with these mods?

Now 1:09 in the video what if your playing on ps4 can you still set up the joysticks how you want them

Can these work for ps4

where can i download the mod

how to setup 25 26 27 28 and what do they do

Hello set these up not working but I'm using a excavator will they work for that ??

Do you have to use joysticks for this to work?

how do i get the z22 file?

it moves slowly by it self. makes me not wanna play cuz i don't figure out how to make it stop

Hello how to set controlls for Xbox pad?

When I delete all the T16000M preset bindings and save the game it doesnt save them when I come back after reloading. Any idea how to stop that? They always come back. I've been trying to figure out why but no luck.

no. we dont want boom arm on the right stick. thats cancer SAE pattern. we use ISO like civilized people :))) great video

Does your joysticks works on Xbox

what joysticks do you use??

Can i get link of a mod ?

Does they work on ps4?

do you need the Joystick to control the machines

Can i use joysticks in ps4

is it possible to get these joysticks into an xbox

Hey FDR good video are you able to set it up for a Xbox one?