Ferguson FE35 "The Hidden Water Tubes"

Рет қаралды 9,692

2 жыл бұрын

The Ferguson FE35 tractor with the Standard Motor Company 23C diesel engines has a couple of tubes many dont know about or know to look for when there is a hard-to-find coolant leak. I cover where they are and how I repair them.
Hello, I'm Lance (aka Bundy Bear), and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advice to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you don't see what you would like please email info@queenslandtractorspares.com.au or call 1300 850 097 and we will help where we can.
I do try and help with technical advice at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
#bundybearsshed #tractorrepair #tractorrestoration #FE35 #masseyferguson #23C #fergy35 #mf35

Пікірлер: 75

@peterhanson4709 Жыл бұрын

I had no idea those tubes were in there but I have seen 2 heads leak coolant past the stud and nut. My fix was the same as used on motorcycle motors where the coolant flows past the stud, more easily seen on a water cooled 2 stroke, a copper washer and a capped nut will hold back the coolant. To my own head I added glow plugs, the best thing ever.

@BundyBearsShed Жыл бұрын

I have a cold start head for my next project so it will be interesting to see how that goes.

@peterjubb5395 2 жыл бұрын

Excellent video Lance. Great that you are prepared to share your vast knowledge with the rest Tractor tragics.

@BundyBearsShed 2 жыл бұрын

Thanks 👍

@tonys8023 2 жыл бұрын

Another great video Lance. Thanks for sharing you vast wealth on knowledge

@BundyBearsShed 2 жыл бұрын

Thanks Tony.

@billweir6770 2 жыл бұрын

Another brilliant share Lance --wish I'd known that about 5 years ago when I rebuilt a 23C... Still, we live and learn

@BundyBearsShed 2 жыл бұрын

I never stop learning thats for sure.

@michaelmitchell1401 2 жыл бұрын

Another great video thanks lance

@BundyBearsShed 2 жыл бұрын

Glad you enjoyed it

@scottleininger2404 2 жыл бұрын

So awesome Lance.

@BundyBearsShed 2 жыл бұрын

Thankyou.

@paulbuxton5583 2 жыл бұрын

Another 1st class tutorial & fix, defo look at my 23c head when the time comes. As I’ve mentioned before you have a great YT channel Lance. Paul.

@BundyBearsShed 2 жыл бұрын

Thanks Paul,

@charleshart6992 2 жыл бұрын

Excellent video Lance - great fix!

@BundyBearsShed 2 жыл бұрын

Glad you enjoyed it

@hilux0872 2 жыл бұрын

Thanks Lance, great information.

@BundyBearsShed 2 жыл бұрын

My pleasure!

@manfromthemist1958 2 жыл бұрын

another brilliant vid Lance, your thought's of compression on the tubes is right, they would deform if they were ali or brass, cheers

@BundyBearsShed 2 жыл бұрын

Yeah thats my way of thinking for sure.

@kt3537 2 жыл бұрын

Great video

@BundyBearsShed 2 жыл бұрын

Thankyou.

@charlesvanderwolf5751 2 жыл бұрын

Thanks Lance. Great information. Regards Charles @ Nerimbera

@BundyBearsShed 2 жыл бұрын

My pleasure!

@buzzbee6488 2 жыл бұрын

Looking good sir

@BundyBearsShed 2 жыл бұрын

Thank you kindly

@tomscott4723 2 жыл бұрын

Oh man, you beat me by 9 minutes to be first! haha .GREAT video Lance the more I hang out with you the smarter I get, I want to be like you when I grow up! Its these little secrets that make me look smart to the other guys haha. Thanks!

@BundyBearsShed 2 жыл бұрын

LOL I never stop learning so keep an open mind and soak up whatever you can learn.

@michaelcandy6283 Жыл бұрын

Brilliant

@BundyBearsShed Жыл бұрын

Thankyou.

@kevinpfaff2301 2 жыл бұрын

man, this is great information. I have a to20 that has disappearing antifreeze. Thanks!

@BundyBearsShed 2 жыл бұрын

Glad it helped. I dont know if the TO is the same but worth a look.

@ewancox4895 2 жыл бұрын

Great video as always. It may not apply to my TEA20, but it's still interesting to know

@BundyBearsShed 2 жыл бұрын

Yes I never knew for years.

@flhusa1 2 жыл бұрын

that reminds me of getting the shower mixing cartridge out after its been in there for years and years. had to to do the same setup. when i replaced with new one i used synthetic grease and anti seize so the next guy can just pull it out with just fingers. somebody was kind enough to make a video and glad they did i fought that thing for over a hour before i learned the trick .

@BundyBearsShed 2 жыл бұрын

Tricks to every trade

@TheKnacklersWorkshop 2 жыл бұрын

Hello Lance, Interesting video... My concerns with the change of material from mild steel to stainless steel was thermal expansion... I've just done some googling and I think it should be okay, although I am far from an expert. Take care. Paul,,

@BundyBearsShed 2 жыл бұрын

Im thinking the thin wall section might allow for that though, there is no real great mass of steel.

@BobOBob 2 жыл бұрын

That seems a pretty good examination of the issue. The tube being recessed into the head surface suggests to me that the upper end of the tube was meant to be forever fixed, and the lower end was meant to be able to slip slightly if the head ever compresses that much across the water passage. This leads me to suggest that the retaining compound should be applied ONLY to the upper end, such as by using a swab and flashlight to put it up in there before the tube. If the stud holes into the block are blind holes, that would support my theorizing that the upper seal of the tube is far more important than the lower seal. Even if coolant could get around the lower end of the tube, it could only get on the threads, the head gasket and a blind stud hole would give coolant nowhere to go except all the way back UP the threads to find any exit to leak into. I would also suggest sealing the stud threads under the tension nut.

@BundyBearsShed 2 жыл бұрын

We seal the studs always but there is no sign whatsoever of the tube movement.

@garethdavies3220 2 жыл бұрын

Hi Lance, I liked your method of removing the sleeves by tapping a thread into them , it reminded me of the similar method used on British Leyland 4/98 engines to remove the copper injector sleeves . P.s do you see many Nuffield and Leyland tractors in Queensland. All the best again from Wales.

@BundyBearsShed 2 жыл бұрын

Not a lot over here any more, they were never a real big seller over this way.

@jefftheaussie2225 2 жыл бұрын

Gareth, The Agricultural Boarding school I went to in the early ‘70s had two Nuffield 460s and a new 465. The 460s were good and tough although a bit dated even then, the 465 was a much more modern machine and I would have been happy to own one of those. I never saw another 465 anywhere though. Chamberlain, International, Ford and Massey Fergusson had it all sewn up here. I have listed them in order, Massey being the softest. Jeff

@tombuffumjr1509 2 жыл бұрын

Thank you I bought a pair of te 35 with a c23 and I live in Conrad Montana do not know if there are any in this part of the world nice to know this so I can fix these before I put it back together thank you

@BundyBearsShed 2 жыл бұрын

Well worth doing

@matthewsimkins 2 жыл бұрын

Thanks for the info Lance. I'm working on a very tired old FE35 with the 23C engine. No doubt be doing this one day! Do you have any heads lying around that have had their pre-combustion chambers drilled out? Seems to be a popular thing to do in the UK and colder countries, maybe not so much in Aus. It would be good to see one before I ruin mine.

@BundyBearsShed 2 жыл бұрын

No, sorry, I have a riend that did one but I never have.

@tridbant 2 жыл бұрын

I acquired one with a 23c motor, the best thing I did was get rid of it and acquire one with a Perkins engine.

@BundyBearsShed 2 жыл бұрын

lol you are not alone there I wouldnt think.

@Drottninggatan2017 2 жыл бұрын

Can you inspect the pipes through the hole in the front of the head? Or are they completely hidden?

@BundyBearsShed 2 жыл бұрын

I think you would see the front one, Im not sure I will have a look.

@Peter-Southern-Victoria-Aust 2 жыл бұрын

Does the Petrol engine in the 35 have these tubes too?

@BundyBearsShed 2 жыл бұрын

No they dont

@munswamymunswam153 2 жыл бұрын

Could you please show us how to adjust Tyre rod ends my 65 has wheels turned half but suddenly it turns another more to the same side

@BundyBearsShed 2 жыл бұрын

When I fit my front end I will cover that, it is all in parts at the moment.

@stevenfenton8137 2 жыл бұрын

Harry ferguson didn't even know they were there

@BundyBearsShed 2 жыл бұрын

lol, he may have

@chriswalker1058 2 жыл бұрын

I’m looking for four good combustion chambers can you help. I’m totally beat

@BundyBearsShed 2 жыл бұрын

Cant help either Im sorry.

@bjorn-yl9pr 9 ай бұрын

Hello, I also have a 1957 Massey Ferguson with a 23c engine. Can you help me? I have a problem with the oil pressure. When the engine is cold I have 4-5 bar at idle but when the engine is warm I no longer have any oil pressure. Greetings björn

@BundyBearsShed 9 ай бұрын

I think you have work crankshaft bearings, and possibly a worn oil pump. As an interim fix you could go to mono 50 engine oil but it will still drop away.

@bjorn-yl9pr 9 ай бұрын

@@BundyBearsShed Hello, the oil pump is new

@bjorn-yl9pr 9 ай бұрын

Hello, the crankshaft and bearing shells are all new

@BundyBearsShed 9 ай бұрын

I would check the filter relief etc then.

@flhusa1 2 жыл бұрын

only thing stainless and mild steel don't like to play together nicely. it's a dissimilar galling metal thing .

@BundyBearsShed 2 жыл бұрын

Cast iron head I think but it will not need to be removed ever again I dont think.

@flhusa1 2 жыл бұрын

@@BundyBearsShed one of my uncles taught me to fix things so I wouldn't have to fix it again the rest of my life . He said takes more time and brainpower but it's fixed for life

@stevenfenton8137 2 жыл бұрын

Lance could make and sell them and call them Bundy plugs

@BundyBearsShed 2 жыл бұрын

Probably could but there would be no money in it at the rate I work, lol.

@flhusa1 2 жыл бұрын

lots of bolts or nuts always seem to fight me to the bitter end .

@BundyBearsShed 2 жыл бұрын

They do at times thats for sure.