Fermenting in a Homebrew Keg | How to with Jonathan Marut
Рет қаралды 5,268
2 жыл бұрынHey friends! Glad to have you join us as we go over the basics of fermenting in a keg and some of the gear you can use to accomplish it. There's a variety of ways to ferment in a keg and our buddy Jonathan Marut gives a nice and easy to follow overview in this short video.
Products mentioned in this video:
HOMEBREW KEGS - www.kegconnection.com/homebre...
SPUNDING VALVE - www.morebeer.com/search?searc...
FLOATING DIP TUB - www.morebeer.com/search?searc...
FERMENTING LID - www.kegconnection.com/ferment...
@jdhiv4 2 жыл бұрын
Quick Question, Maybe for Jonathan: Why not keep the tube buried in the trub as is and just use pressure to drive all of it out the liquid tube until the beer runs clear? Thanks!
@jkmarut 2 жыл бұрын
You can try it, but depending on how thick your trub is, you might end up clogging your disconnect. The orifice is pretty small there, and that spring loves to collect any bits that are in the flow.
@memyself898 2 жыл бұрын
@@jkmarut ^^ this, especially if you have a lot of hop particles in there.
@madasinwat2 Жыл бұрын
If I used the spunding valve and fermed under pressure, would i need to connect up a co2 tank afterwards or can i hust connect to a tap and pour away once the fermentation is done? Thanks
@richiedubs1062 Жыл бұрын
You still need to keep a regulator attached at serving pressure. Depending on the length of your line, you might get the first few pints out with the existing pressure, but your beer will go flat and eventually you will not have enough pressure to serve.
@madasinwat2 Жыл бұрын
@@richiedubs1062 thanks for the reply mate 👍
Bitter Reality Brewing
Рет қаралды 36 М.
City Steading Brews
Рет қаралды 20 М.
Get Er Brewed - Brewing Beer
Рет қаралды 48 М.
The Malt Miller - Home Brewing Channel
Рет қаралды 19 М.