Festool Live Episode 13

Festool Live Episode 13 - LR 32

Рет қаралды 72,670

4 жыл бұрын

The team walks you through the features of the Festool LR 32 Hole Drilling System.
Hole Drilling Set LR 32 Set - (Item Number - 583290): www.festoolusa.com/accessorie...
FS 1400/2-LR 32 - (Item Number - 496939): www.festoolusa.com/products/g...
FS 2424/2-LR 32 - (Item Number - 491622): www.festoolusa.com/products/g...
OF 1400 Router - (Item Number - 576213): www.festoolusa.com/products/r...
OF 1010 Router - (Item Number - 576922): www.festoolusa.com/products/r...
With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system. Invaluable for placing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework, this portable line boring system allows you do in the field what has traditionally been a shop-only job, possible only with large stationary equipment. For use with the Festool OF 1010 and OF 1400 routers and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Includes: Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, Operating wrench, 35 mm carbide-tipped European hinge boring bit, 2 carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes).
The passionate drive to create is at the heart of every job. Dedicated professionals create the spaces that become part of our everyday lives. Achieving remarkable results requires extraordinary creativity, exceptional skills, and tools to match their ambition. Festool tools are built to deliver durable quality, reliable precision, and dependable power that you can see and feel every time - on every job.
Built Better to Build Better
Disclaimer: Festool USA retains the right to remove profane, abusive, trolling, or spam comments at our sole discretion.
MyFestool Customer Account Setup: bit.ly/3DnWloZ
Festool USA Website: bit.ly/3fVZrmg
Festool USA Service: bit.ly/37YhVQn
Festool USA Dealers: bit.ly/2NtBTsH
Instagram: bit.ly/3i1lgmf
Facebook: bit.ly/3fV1jvu
LinkedIn: bit.ly/2VidKJY
Tags:
#Festool #FestoolTipsandTricks #Education #32mmholedrillingsystem #BreakingdowntheFestoolLR32system #Framelesscabinets #CalibratingtheLR32 #WhatcomeswiththeLR32 #SettinguptheFestoolLR32 #Understandingparalleledgestops #Changingtherouterbit #UsingtheLR32system #KitchenCabinets #FramelessCabinets #Creatingcabinets #Buildingcabinets #Festoolsystem #Livestream #HoleDrillingSetLR32-SYS #OF1010 #OF1400

Пікірлер: 80

@brakarzacant3842 2 жыл бұрын

Thank you so much sedge for this video. I have just purchased the LR32 system kit and looking forward to expanding my abilities in my home workshop in Sydney Australia. Your videos have made my transition to much easier with your explanations and demonstrations

@daviddiannapugh 4 жыл бұрын

Thank you Sedge for doing another great training session. What really comes through is your devotion to the craft and to us. Thanks to Festool for creating such incredible systems and building them perfectly.

@georgebutler3rd 4 жыл бұрын

Sedge, you have great timing! I'm making my shopping list right now.

@dougs1723 4 жыл бұрын

I think this is the first LR32 video I've seen that actually made sense. Thank you!!!

@adriaan7627 4 жыл бұрын

Curious to know and hear how exact these holes will be separate from each other in comparison to the Parf Guide System. Did anyone try?

@Toolman93 4 жыл бұрын

Adriaan Groeneveld The two products are designed for different purposes. The Parf system is intended to be used to create a very accurate 96mm x 96mm grid identical in usage to the Festool MFT system. The LR32 is designed to Quickly and accurately place holes at 32mm increments in known (and easily reproducible) locations in reference to top, bottom and sides of your target workpiece. Having said that, I own (and love) both systems. The Parf system is ideal for creating a new work surface, but would be unbearably slow to try to use in cabinet making. The LR32 is probably just as accurate as the Parf when making a row of holes (and much, much, much faster), but it couldn’t create an similarly accurate grid without some extra tools and setup.

@paulmacey9084 4 жыл бұрын

thank you sedge i love your videos you do i have watch every one brilliant thank you paul from the uk

@stakwalderbak5331 Жыл бұрын

Love the tip on the clamp

@hammerandhome 3 жыл бұрын

Great video! so many little questions answered for me, Thank you!! keep it up

@AngieWilliamsDesigns 4 ай бұрын

My LR32 system is arriving tomorrow. Figured I’d get a head start and watch so I know what to do when I get it. So excited. I feel better prepared now. Already have the OF 1400 and have been using it. I always go to your videos and Jason’s to get educated. I am super excited to do my shelf pins…. But also my drawers. OMG! Just finished a simple 4 drawer small cabinet for my drill press. Drilling for my drawer guides is the worst. I also can see it will make me enjoying doing the doors more as well .

@kiwdwks 4 жыл бұрын

Thanks again!

@AlAmantea 4 жыл бұрын

Love my LR32 system! I use it all the time, yet, I still picked up tips and tricks from this video! I'd love to see a video on using the LR32 system for making a new MFT top with a 20mm bit on the OF1400! I mean, it's a 96mm spacing, so ever third hole, right? Should be simple and easy! Love ya, Sedge! You are the man!

@ronh9384 4 жыл бұрын

I’m with you on that. Making a video on making an MFT top with with the LR32 system would be excellent! Ron

@petergalitzine6749 3 жыл бұрын

good demo on the domino 500 , have both tools mostly use the 500 bought all the kits for both systems excellent capabilities , your show is very good I pick up those tricks and tips, looking forward in your next video.

@WelshRabbit 4 жыл бұрын

Boo hoo! I missed the live Sedge presentation, but thank goodness, I can enjoy the replay. I absolutely LOVE using the LR 32 system with my 1400 router.

@garybadger325 3 жыл бұрын

At 44:10 you clamped the 32 up and out to the top to the door panel. Doing so, how do you account for the 2mm reveal since you said earlier that you cut the door to 764mm. Were you suppose to use the 2mm edge banding material between the stop and the top edge of the door? Thanks for your videos. Learning alot.

@thomasbaumgartner5104 Жыл бұрын

Sehr gutes Video, super erklärt und gute Tipps gegeben. Viele Grüße aus Deutschland.

@moderntouchfurniture 2 жыл бұрын

Another awesome video Sedge. I watched this a year ago, before I purchased the Festool shelf pin system, and now that I have one, I can go back and watch this video again to refresh my memory. Thank you guys/gals for taking the time to do these videos, I know it's not easy. Anyone know where I can get those screwless hinges, can't find them anywhere?

@jimlelan4906 Жыл бұрын

Yes, inquiring minds want to know..

@grahampahl7100 4 жыл бұрын

Graham from Sydney, Australia says hello and thanks for the series. Time zones don't work for the live feed which isa bummer.

@anonymous.youtuber 3 жыл бұрын

Greetings from Flanders !

@RobKernahan 3 жыл бұрын

Hey Sedge, great explanation and demonstration of the LR32. I would like to clarify something, given that the door was cut 4mm shorter than the cabinet you had a 2mm spacer which I assume you placed between the door and the end-stop to keep the correct 80mm cup hinge offset, is that correct?

@tcbridges 9 ай бұрын

I bought the 1010 and after using the LR32 system I decided to buy a 1400. Now the 1010 is strictly my LR32 router all set up and ready to go. I live having both. I also use 2 DeWalt 20volt smaller units. With those is don't need the 70 for edging.

@CarstenDittrich2014 2 жыл бұрын

Thank you - very informative. What cabinet tape measure is Sedge using, and what type of hinges are those that just click into the pinholes?

@maydanlex 4 жыл бұрын

Love to hear this guy at a Bruins game.

@jeffgoldsmith1679 3 жыл бұрын

Exactly, a Bostonian doing a Bruins game. I'm in Florida now but I miss the accent.

@ronh9384 4 жыл бұрын

Love the video’s and you guys are getting better every video. And I have been waiting for a detailed video on this topic so thank. I just have one request.... Can you add some additional lighting? There have been several video’s that you have been pointing to something or doing an explanation and I can’t see what you are pointing to or it is in a shadow. I apologize for the criticism and as I said I love the video’s and you are all doing a great job. My favorite video each week! Ron

@dougsinden6881 3 жыл бұрын

I make custom size cabinets but from now on I'm gonna make sure they're a multiple of 32mm. So much easier

@marccoletta8193 3 жыл бұрын

Lol, I love this guy!

@alimaleki217 2 жыл бұрын

Great content Sedge! Too bad the cameraman doesn’t give a hoot that we can’t see the intricate details you’re pointing out.

@robpaterson2120 Жыл бұрын

Which tape measure has the marks at the 32mm increments? Having one would be great to be sure I am always cutting/making my panels balanced.

@kevinschou1289 4 жыл бұрын

Sedge, Love what you all are presenting and learning a lot! A quick question, you said 80mm from the top, but I missed what you said from the bottom of the cabinet? Thanks again, can not wait till next Friday!!

@festoolusa 4 жыл бұрын

80 mm from the top and bottom for the first hole for the hinge plate.

@jwar2163 3 жыл бұрын

Sedge What tape measure are you using? I saw that it has millimeter / centimeter and inches. I have yet to come across a tape that has the marks at 32mm.

@ijustwatchtutorials7863 Жыл бұрын

Can you use this system to drill for the screws or push in hinge holes on the sides of the hinge cup?

@adriaan7627 4 жыл бұрын

Why is there no adapter for the OF 2200 router?

@oronzopavone4760 2 жыл бұрын

What if you have the upper cabinet to be 914mm Can you still use the lr32 system

@jorgevillalpando4269 3 жыл бұрын

What kind of hinges you using?

@garronsteele5143 4 жыл бұрын

@Brent-i know this might not be on topic but i finally ordered the festool pre seperator today but i still cant find any info on the hose diameter from the extractor to the pre seperator. It would be nice to know from an interest point of view. Sorry to deviate from the topic but i already use the LR 32 system. Biggest Festool fan in South Africa

@brentshivelyfestooltrainer9017 4 жыл бұрын

@Garron Steele The hose diameter from the extractor to the pre perpetrator is a 32mm hose. Thanks for the question!

@charleselkins4546 Жыл бұрын

Great video. Maybe I will do better with the my LR 32. What was the 2mm spacer for?

@festoolusa Жыл бұрын

The 2mm spacer is for the reveal top and bottom of the allowance of the door to the cabinet!

@MrVincenzogallizzi Жыл бұрын

Hi There, I bought the LR32 system kit, but the plate holes do not match my OF 1010 EBQ base. Can you please advise about this? Thank you and happy new year!!

@jwar2163 Жыл бұрын

Can someone at Festool Do a demo of the LR 32 Sys routing shelf pin holes into narrow stock ?

@dawnschubert1534 3 жыл бұрын

Hey, I’m watching Tough as Nails and I thought I saw the contestants using your tools. Was I seeing things?

@oldcodger4672 4 жыл бұрын

Brent Shrively’s name is in blue, with a spanner beside it. I have notice this in other live chats. Can someone explain the significance of the blue text and spanner. Thanks

@chrissymon1001 3 жыл бұрын

Probably an administrator

@bigmonkey999888 4 жыл бұрын

Hi Sedge, couple questions, by the way another brilliant instructional video! Who manufactures the clip on hinge plate? The tape with the diamonds on it who's make is it? Steve, in Leeds, UK.

@chuckwieland3940 4 жыл бұрын

Same question on that hinge...I am searching, but can’t seem to find it.

@PSchaug 4 жыл бұрын

I guess the hinges are from Blum, check www.blum.com. They have a very nice range of hinges.

@adriaan7627 4 жыл бұрын

FastCap for the tape measure. Don’t know about the hinge.

@bigmonkey999888 4 жыл бұрын

@@adriaan7627 Hi Thanks for the info just ordered one! Steve

@bigmonkey999888 4 жыл бұрын

Chuck Wieland hi the hinges are Blum Inserta Steve

@cerberus2881 2 жыл бұрын

The Festool banner at the bottom of the video is In The Way!

@royr327 Жыл бұрын

Why is there a 9.5 marking?

@dougsinden6881 3 жыл бұрын

You didn't use the 2mm spacer

@maximusprime2759 2 жыл бұрын

Boy he should try the kreg jig for this. This is WAY to complicated.

@manujmundhada7522 4 жыл бұрын

Festool should develop similar system for domino

@ronh9384 4 жыл бұрын

manuj mundhada Not a bad idea. It would be easy enough to make a plate to ride on the LR-32 rail and router plate and make it so the DF 500 or 700 XL is flipped upside down and you could have very accurate placement control of the domino’s....

@mim2046 3 жыл бұрын

Also, your performance makes people think this is a sadly performed “infomercial”…..waiting for you to say….”and there’s more”!

@Activity-or-lack-of Жыл бұрын

What brand hinge is that? No screws. What are they called ?

@festoolusa Жыл бұрын

Hi there! they are blum Inserta hinges!

@manujmundhada7522 4 жыл бұрын

Sedge. I wonder why festool is professing to use LR32 system the way its shown in video. Why not use full capacity of festool system(MFT/3). I normally attach LR32 rail to mft instead of normal rail. This way you save lot of time. You dont need to move rail and use clamps. Speed is tripled. No need for vacuum sys.

@chrisblair6823 4 жыл бұрын

Thanks for the excellent series. Like another comment made, I prefer you in subdued mode. The eye roll and the joke about collecting soda glasses was classic deadpan humour. I was never a fan of Jerry Lewis style of screeching humour, and find it very distracting when you indulge in that style of commentary. You are a class act Brian, and deserving of our respect, so it is with the utmost kindness and consideration that I suggest you give the class clown aspect a rest.

@troyqueen9503 4 жыл бұрын

Why isn’t the dog wearing a festool dog collar ,logo

@stanwingert207 3 жыл бұрын

Thank you Festool for the videos but can you put a limiting switch on his high-pitched squealing those of us that like to watch things but late at night I have the volume set so we don’t wake anybody up is the one time we can have to watch and maybe learn something and then he hast to yell and squeal and let’s just say if you’re watching something at 1:30 in the morning and he does that it’s not helpful the UK versions don’t have any yelling or squealing only thing is there’s no translation otherwise I would watch all of those

@alancroft6928 3 жыл бұрын

@mim2046 3 жыл бұрын

I can’t stand when people do the “car salesman” pitch. Coming from an avid Festool user, lose the dramatic performance and stick to the facts and you’ll sell a lot more products

@ramellin 2 жыл бұрын

Just another used car salesman

@rogerg34 2 жыл бұрын

I lasted about a minute of this before closing. Cringeworthy......

@adriaan7627 4 жыл бұрын

Sedge think about our ears. STOP those little high pitched sounds you make when getting excited. You are not a yelling kid or are you?! IT IS REALLY IRRITATING YOU DON'T GET THE HINDS WE GIVE YOU. The information is wonderful, but do it in a way we don't hurt our ears. Also a shame you don't respond to the reactions that are written.

@sdanasss 2 жыл бұрын

just take a jig from Blum and its takes 2 minutes to drill the hols .Ithink its useless tools from festool

@jimmybendfeldt4078 2 жыл бұрын

Stop using metric you in the USA

@alexandermessier5509 2 жыл бұрын

this guy is sickening

@jimmydavis719 4 жыл бұрын

Great tips, but the presenter is not doing Festool any favours. Some people are funny, and others try to be funny. This guy, unfortunately, falls into the last category. I watch these videos for education, not for entertainment by a wannabe stand up comedian.