Today we investigate Feuling's 465 M8 cam upgrade in our 2023 Road Glide shop R&D bike, GoldenRod! JD's Cycle Works is located at 6146 Sullivan Trail, Nazareth PA, 18064.
Пікірлер: 29
@robertfagan88335 ай бұрын
Wow that cam delivers.. phenomenal numbers and the fueling name says it all
@Jim_Berry5 ай бұрын
I was waiting on this one. That’s the cam I want and thanks for reviewing it.
@chosenfew13985 ай бұрын
I was thinking the same thing. I want to do the hp+ camchest kit, oil cooled m8 w/ reaper 465 on 23 RGS
@JDsCycleWorks5 ай бұрын
You’re welcome, we’re happy to have helped you!
@jasonbreedlove4955 ай бұрын
Dave, thanka for doing this cam. I had this in my 2017 Streetglide and had been debating on usingnit in my 19 Roadglide Special. Love the cam, it does so much and like fueling states, its an accelerator for sure. Think you helped make my mind up.
@JDsCycleWorks5 ай бұрын
Glad I could help! This feedback makes this all worth while
@lloydsuddreth53435 ай бұрын
That is impressive
@JDsCycleWorks5 ай бұрын
Thank you!
@DeterminedVeteran5 ай бұрын
Keep up the great work ! You’ll be over 1k subs very soon
@JDsCycleWorks5 ай бұрын
Hope so!
@ericroadking75645 ай бұрын
Looks like a good one!
@1962egl5 ай бұрын
Moonshine harley used this cam a lot until george bryce started making their 485. (30/30)
@DeBa12265 ай бұрын
So this Feuling cam basically put out the same numbers as the S&S 475…. Interesting.
@JDsCycleWorks5 ай бұрын
There are a handful of cams that work similarly to the 475. I will go over this in a future video. I think at this point it is a personal choice or price point which will help you choose the cam that’s best for you.
@jasonkimble89265 ай бұрын
Surprise me too
@mattbishop12285 ай бұрын
Wondering if you check the run-out each time you change out the cams. Curious if it had changed over time. How much punishment can a stock M8 bottom end take?
@JDsCycleWorks5 ай бұрын
I will be checking the run out when I take the next cam out. I have checked it a few times and it has not changed from original.
@kevincarnes75985 ай бұрын
Dave, Will you be testing the S&S 465 cam? I have this cam in my 17’ SGS with the 107!
@JDsCycleWorks5 ай бұрын
Unfortunately we did not get to test that cam this round. It is a more low end biased cam that can be timing sensitive due to the increased cylinder pressure it creates
@kevincarnes75985 ай бұрын
Dave, with your comment..in your opinion is this a decent cam? It’s definitely a torque cam down low.. did I make a bad choice? I’ve had it in for about 4 years and feel like there’s definitely better cams out now for the 107.
@seanodriscoll64635 ай бұрын
Would a cam like this need plate and pump as well? I always see everyone upgrading, but never see any real talks about long term reviews of bolt in cams, if OEM plate and pump are finally good enough. Talking about for a 2020 Road Glide
@JDsCycleWorks5 ай бұрын
In the 2020, Harleys newer design corrected many of the issues they previously had. With that said, the updated oil pump and stock cam plate are more than adequate for a cam upgrade. But- do not forget to use the oil pump back plate seal 🦭
@derrickw56605 ай бұрын
Is it a bolt on cam or do you need to change the springs and valves
@JDsCycleWorks5 ай бұрын
The feuling 465 is a Bolt in cam does not require spring changes
@davidmatias62395 ай бұрын
How many different cams are you planning to test ?
@JDsCycleWorks5 ай бұрын
We have done 22 with this round. There may be another round in the future, but we have to close this portion of testing out.
@unclesaamisarmory4 ай бұрын
Can you do a video of the star racing 30-30 cam or the star racing F35A cam?
@JDsCycleWorks4 ай бұрын
We have videos on both of those cams, check our Cam Review Playlist!
@unclesaamisarmory4 ай бұрын
@@JDsCycleWorks I apologize, I saw them after I sent the message. I appreciate the work you do for us.