Probably the screaming Eagle cam there shite

should dunk in lover gear , the bike hit the limiter at 107 and was not even 5k RPM

My 107 with zippers 468 cam, Rhinehart 2 in 1, Rhinehart inverted air filter as the same dyno results

Wow, HD is really putting the screws to us

Thank you for the video Dave ✌🏼

I have the 117,468RS cam, SnS ported manifold,hpi 2-1, n tuned with se tuner😢. 117 hp- 136 hp. After warranty is up next year,I’m doing a power vision tune. Should see some better numbers

Something doesn’t seem right here 🤔

My 114 breakout with a stage 2 SE torque cam, stock headers, and Rinehart slip-ons puts out 102hp and 118ftlbs. I really expected to see better results for a stage 2 117. Something doesn’t seem right there.

Now those are the hands of a hard working master mechanic, no latex gloves for this man.

Hey Master Mechanic Dave, enjoy your videos, just wondering, have you ever tuned a Harley that has Dynojet's Target Tune system installed?

Thanks Dave. Wish you could tune my bike, but your too far away. I’m in Florida.

Thanks for sharing this!

What about pumping up the throttlebody manifold. Yes there’s probably zero tune for that but… Someday. that CVO is a VVT? That’ll make a difference in future 117s

Just wondering if you hooked up the wideband Harley Davison autotune do you think the numbers would be any better? Knowing JD he’d probably figure out how to squeeze the Max out of it. I think you should give it a shot, lot of people would be curious. Most Dyno fanatics would realize it’s still an EPA configuration, but it’s got to be better than what you have currently presented us. Thanks for sharing the video !

Hi Dave🤗 interesting video😳 One thing I do no…The work you’ve done to my bike put a smile on my face thanks, Dave👍🏻🇺🇸

The extreme air filter is getting a great reputation for flowing big air.

My 114 with the zippers 468 cam chrome works exhaust S&S 55 mm intake that you tuned Dave is in line with the 121 I couldn’t be happier runs like a Ferrari more than enough power for me an old man went on a 400 mile ride last weekend average 50 miles a gallon Dave you are the best

My 117 low rider s with zippers 468, stock air cleaner, cobra slip ons was just dyno'd here in florida and we had similar problems with heat/ humidity. I basically came out with 105hp and 131tq.. I was thinking at least 5 more on each number. thanks for posting this.. makes me feel better!

Good info.

Why the drop off at 4800 rpm? Is it because of the speed limiter?

auto tune it ,will correct it self, I upload thug one tune on mine than I run it few times in a auto tune and now the bike runs very good, plugs looks great to.

Great vid

Interesting stuff Dave, makes me happy to see the upgrades you did for me on my 18SGCVO, kicks those numbers butt😂

Interesting stuff

Another valuable video. Dave, what’s the cost of the Wilbers vs. Legends?

Hello Dave I have a question, have you done a dyno run on a 103 with the max-cell T905A cam and if so what were the numbers, also I have a 103 with a ThunderMax tune and it stops at around 105 or 110 mph is there a way to get that speed higher, it’s on a 2012 ultra limited, thanks for any information and advice

One of the best videos out there. Thanks for your hard work!

Thanks for the review, I have legends and been considering the wilburs 👍🏼

There are only a few shops I have seen that explain baffles like this. To bad none of those shops are no where near where I live in northern Virginia. I really want to get my sportster a professional dyno tune and not a "professional" dyno tune.

Tell ya the truth guys I had a 2009 FLTR I put Dirty Air suspension on the rear. I had a 2022 FLTR Special I put the full Wilbers set on , front and rear. I’ll stick to Dirty Air and only the rear suspension… LOVED IT

So you did go with the CR/APE 483! Great choice. The best cam on the market for sure now.

Thank for sharing Dave ! I recently got a 23 SGS and the suspension sucks compared to my old heritage. I'm gonna look into wilbers

Love it

Excellent video Dave thanks for your time. 👍

Dave how do you think this cam would work with bassani rr 3 2into 1 exhaust with the screamin eagle extreme air flow intake, everything else is stock?

Is it better than ohlins?

Awesome Wilbers is a good choice!!

I always enjoy your video's. Well Done.

Great product review and nice install! You might wanna recheck the sag adjustment, according to your weight (rough guess), the preload is on the little side. Rear wheel needs to be off the ground (maybe not shown in the vid) for the base measurement and then with you on the bike (not your wife), it needs to sag 20mm. No bouncing around, as this will already activate the auto leveling and falsify the measurement. Enjoy the Wilbers, you will love it.

Another great video Dave. I put a full Wilbers suspension on my 21 Road Glide Special in fall of 2021. Love it. Best suspension I have had on a Harley and I have had the "other " name brands as well. I also love that fork tube holder. I use an old lower triple tree for a holder. One side for 49mm and one modified for 41mm.

I have legends rear I want to upgrade my fronts to

Thanks for the video. Cute dogs also.

What a great team. Jay, Dave and the doggies. Thanks for the great info. I need a suspension upgrade on my Road King. Thanks.

What did Wilber’s say about the 7/8” front ride height loss?

H-D’s and man’s best friend, couldn’t ask for better KZfaq content! Is that an 03’ heritage in the background at the end?

Awesome, thanks for the info . I love ur videos !

Great video, I considering the Wilberts now

Are wilburs better than legends do you think

Great video Dave on that suspension. I’ve heard about like you said, but glad you got to test it and confirm it for yourself because even though it’s pretty expensive, I heard definitely worth the money when you hit the bumps and divots while riding.. nothing worse when you’re back gets jolted on a big bump