Thank you for understanding the purpose of the video friend, thanks greetings!

It'd be fair to assume that if hose pipes are readily available then the fittings are, it's also highly unlikely there'd be plumbers merchants aswell had that been the case

@JENSEN DIY Let me get this straight. In other areas of the world where there's access to KZfaq, a heat gun, and spare PvC piping, there aren't threaded fittings? Imagine the market profit to be the one to introduce a threaded fitting just for pvc... or even a pipe threader! That way there would be no need for people to burn themselves heating up pvc pipe! Oh I think it should also be mentioned the heating pvc to the temp of modeling not only releases toxic gas, it also causes plastic to become brittle. So should anyone do fall on that one side of the world, please remember to use gloves, have proper ventilation and, do not heat mold pvc more the two times.

@@dirtysilver2841 thanks for your advice friend🤜🏻🤛🏻

Yeah threaded ball valves, faucets, and threaded fittings for pvc are not a rarity anywhere you can purchase the pipe for this exact purpose. It's very common.

wow thank you very much friend, greetings 🙏🤝

Agreed! My jaw was on the floor. Not only is it cheap, but a great work around if the stores are closed! BRAVO! 👏👍

@@harleyrdr1 thanks friend

@@harleyrdr1 .....To be fair I'd just wait until the store is open so I can do a proper job. I've seen far too many cheap DYI's in peoples homes.

wua thank you very much for your great comment friend 🙏🙏🙏🤜🤛

@marcum exe thank you very much friend

Thank you very much friend 🙏 I'm glad you liked the idea

Why not just buy the cheap little adapter for "pocket change" instead?

@@HelloKittyFanMan. because the store is 30 minutes away?

@@joeshmoe4671: I don't know. Is it? Why would I know?

@@HelloKittyFanMan. If you wanna be extra handy and use scrap or whatever and save money, why not do it this way?

Thank you

@Allie and David, it is ALWAYS someone else. We all know your @ss isnt walking 5 miles.

@Allie And David Did he charge you for this knowledge? He let me watch this video for free. He must only charge jerks.

Notice at the end the hose end has been replaced with a plastic hose replacement. Too much heat for the OEM metal hose end. It would have been cheaper and easier just to by a male hose end PVC adapter in the first place.

@@carlmccoy662 Notice in the beginning, it is the same plastic fitted hose that's in the end.

Thanks you friend

Muchas gracias, un gran saludo!

Muchas gracias, saludos cordiales!

Thanks friend

Hay lugares en que los recursos económicos son escasos, es ahí dónde estás ideas son muy preciadas, tienes que echar mano, a lo que tengas,✌️😷

In a pinch it's a nice trick to know.

With the cost of fuel today, if the closest supply house is more than 45 mins away, you might want to know how to do this.

@@nigelstrangeways7330 it would probably take more than 45 minutes to do this and it's temporary so it will have to been done the correct way eventually

Thanks for your nice comment man. 🤜🤛

@@Mrinventor93 ļ

When your not a plumber you don't realize plumbers are either laughing at you. Or the only one with a heart is begging you please don't do this much better easier less problem causing ways to help yourself without giving yourself a high water bill or ruining your home. It's not worth it unless you just can't get it because of war or the walking dead becomes real life. Go spend a dollar fifty for a foot of 3/4 pipe a female adapter and a coupling prime and glue them together screw your hose bib into female adapter you did the same thing no heat gun required you saved a lot of money that heat gun for one use is not worth buying unless you just want to drop 250 on the heat gun. At which point you could hire me and save money. And you did not flood your house using sketchy handyhack tricks. I like my couch bed washer dryer and don't want to lose everything because I thought ai seen a real cool trick.

I agree

Yea this is perfect for me because I’m cheap and my Neice and I like to problem solve.

@@suziecreamcheese211 Good for you

And when it explodes when you're not home you have a swimming pool and $1000 water bill. How awesome is that 👍 😃. Sheesh. 😒

Thanks for understanding the video friend, I have the same problem with the hardware store they are very far from my sona. Cheers!

I also live in a farm, far from town. That's why I keep a small stock of this kind of hardware. When I use any part, I buy the replacement next time I go to town. Living in a farm means thinking ahead. 🤗

@@rodolfoa.jofresepulveda5685 very good thoughts man thats good best to have parts in stock

@@rodolfoa.jofresepulveda5685 Thinking ahead is great idea for all aspects of life.

funny, the hardware store is also where you have to go to get that heat gun, too! keep a bucket of spare PVC fittings in the garage and this repair is done in 30 seconds!

Very versatile... I made a slingshot using pvc that can put a golfball thru the bottom of a 5gal plastic bucket from about 5 yards and launch a tennis ball from endzone to endzone on highschool football field

You could build a mechanism out of pvc that does that for you.

@@gotink27 *CAN YOU PLEASE SEND ME A LINK? I WOULD GREATLY APPRECIATE IT, THANK YOU IN ADVANCE.*

@Philip Neri Thanks you

Thank you friend 🙏

If you are in this sort of trouble you certainly need help,psychiatric help that is.

Leaks for days.

@@cpt.drucifer4866 lol how to run up your water bill 101 all these poor people think they learned a handy trick when all they learned was how to hurry up and blow your hard earned money instead of going and buying a 64 cent fitting

ya.. pvc fittings are super cheap though. i cant imagine being in a situation where this would be the best option

If you use this in your house you're asking for leaks dude

@jon Thank you for taking the time to comment friend

@Tony Robert You confirm something that you have not even made them a friend, how can it be that, I feel safe and I can tell you that this can last a long time

De nada gracias a ti 🤝

thank you very much friend 🙏

Yes you can even use PVC pipe , shears &/ or a hacksaw& a heat gun to make a molded waterproof knife sheath using similar methods .

Gracias 🙏

Así es mi amigo bien dicho, ecxelente día 🤝

osea es difícil una simple llave pero si hay que tener el. blower para calentar, una. prensa El pegamento segueta 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 se entiende la idea pero eso es complicarse la vida

Lo bueno que en cada casa hay una pistola de calor

Muchas gracias amigo🙏🙏🙏🤜🤛

No era más fácil calentar el tubo directamente y hacerle la rosca en vez de cv ortar y empalmar creo se se ahoraas tiempo

@@josericardomalagonprado2749 te entiendo pero si lo aria de esa manera calentando el tubo no se marcaría la rosca bien ya que el tubo se hablanda y si lo hago directo al tubo sería más complicado ya que tengo que generar un poco de presión al momento de estar realizando las rosca amigo

Thank you friend, believe me at some point in life you might need it despite being a simple idea, thank you for your comment 🙏🤜🤛

But he has 3/4" PVC? Did he make it out of sand and clay?

and in all fairness, maggie, our australian shepherd, was usually right there to supervise and lend a helping hand whenever needed.

Got it. Age 4. I designed an interstellar mission to a far away galaxy and submitted it to NASA. I was only 3. They accepted it, and gave my dog credit.

Así es amigo, muchas gracias 👍

Buen comentario, una muy buena herramienta que se debe tener en casa🙏 Gracias amigo saludos!

wow thank you very much friend 🤜🤛

@@Mrinventor93 de nada amigo!

@@rudybigboote3883 🤝

or you can. buy this part, that is made to do exactly this. oh and there's a female as well. Go figger

Thank you very much friend 🤜🤛

This is pointless. There are PVC fittings made specifically for this that cost less than a dollar

I don't know where you all live, but nobody carries that here. And we have Home Depot and Menard's. Meaning the threaded part. The simple connector is everywhere.

@@PublicUnindoctrinator True, but what if you are not a plumber and live an hour away or more from a hardware store and only have PVC pipe? just because there are proper parts made does not mean you can't use a hack like this, especially if it will only be a temporary quick fix until you can buy something better. There are times when you just need to get something done quickly and this fits the bill, I am not saying it's meant for plumbers, they should already have the parts in their van or truck.

@@The_Story_Channel then just order it online!

@@PublicUnindoctrinator Did you not read all of my comment or do you just not like people with opposing views and ideas? who is going to order a couple PVC fittings online and then wait for delivery if it's something that needs to get done quickly, it may not be the application in the video, it could be anything you are in a hurry to get done. What it comes down to is this, you are free to do whatever you want, but don't shit on other peoples ideas and call them pointless, sometimes you need to think outside of the box and just because it does not fit in your box does not mean it is wrong or even pointless. In a perfect world, we would all live 5 minutes away from a hardware store or be Prime members with same day delivery from Amazon, but what if you are running a remote small family mining operation in the middle of nowhere and you don't have everything you need to repair something? the answer is you have to be resourceful and work with what you have, I am speaking from experience. Personally speaking, I probably would not have done it the way it was done in the video, I probably would not have even thought of it, but I give kudos to the guys creativity because it worked.

Great thank you very much for the support and of course my friend will serve me 🤜🤛

Thank you friend 🙏🤜🤛

Thanks friend, best regards!

good buy 👆

@marcum exe Tkanks you

Muchas gracias Álvaro🙏

No hagas caso del título. Cualquier plomero tiene que saber hacer eso. Lo digo porque yo soy plomero

Gracias Extraterrestre🤝

Thanks you

They literally sell the proper fittings for a dollar and some change

@@_r.t- I mean duh, but this way you can reuse little off-cuts that would otherwise just end up in a landfill. Could also come in handy in a pinch if you don't buy enough fittings and don't want to transit back to the store. Either way it could be useful knowledge 🤷🏾

@@_r.t- I actually went to 3 different stores and a plumbing supply warehouse spent close to $10 .00 and have a set up that looks sloppy and over engineered . Will switch it out by threading the pvc pipe . Maybe before the inflation kicked in did a dollar get you something ,but we are in a recession and a dollar doesn't get you much anymore.

@@whdbnrm3023 especially when a person is on a fixed income. Sometimes a dollar might as well be a million dollars if you don’t have it.

@@_r.t- not all of us have a car or a dollar and some change. Some of us are on a fixed income cuz we’re old! Not all of us are well off, some us are barely surviving.

Hello, in fact, that is the idea and the purpose of the video, only a recommendation in case you do not have the adapter, thanks Kurt🙏

What emergency is there that you would spend 30-45 minutes screwing around with a hose?

Agree. Fix it right the first time.

Lol , and spend way less money

Far less involved ways to deal with a garden hose " emergency ".

You're welcome, a pleasure and thank you for taking the time to write🙏 Cheers!🤝

gracias Junior

@@Mrinventor93 gracias por mirar mi comentario

@@juniorleit478 De nada amigo un gusto, bendiciones 🤝

🙏🙏🤗,,,🤝,,,

Grazie mille, amico mio

excellent friend thanks to you

Gracias mi amigo, bonito día 🤝

Gracias María🙏

Saludos

Also nice day friend greetings!

Just because it’s “cleaner or better” doesn’t mean it’s proper and up to code, there was no primer on that glue joint and it would’ve been simpler to just buy a male adapter fitting and a bushing to transition over to garden hose threads.

De nada gracias a ti Angel 🤜🤛

Muchas gracias

Es la true, confirmo

Me alegro que te haya gustado, muchas gracias, Saludos!

Muchas gracias por entender la finalidad del vídeo amigo🙏🙏🙏. Saludos! Alf Rodríguez 🤜🏻🤛🏻

vas a la ferre y haces la instalacion y te quitas del apuro. Cual es la urgencia?

El consumismo.anula la creatividad.

pq debieran enseñarte bn

Muchas gracias Jesús

Save a fortune? A 0.30 cent adaptor.

Gracias ☺️☺️🙏🤝

podrías ser estúpido

muchas gracias por su comentario un gran saludo buen dia!

@@Mrinventor93 Si muchas gracias ati. Buen día 🙏🙏🙏🇵🇷

@@zoraidalugotorres3744 🤝🙏

Muchas gracias mi amigo, ecxelente día saludos!

@rob F This is a good method to use if it's 5 o'clock on a Friday and the nearest hardware store is 50 miles away.

@@francoamerican4632 if the hardware store is 50 miles away, why not get what you need before you start?

@Franco American Thank you for understanding the purpose of the video friend 🙏

excellent man take advantage of the return and buy all the accessories for the installation🤜🏻🤛🏻

Muchas gracias amigo 🤝

Eso solo son ideas por si no hay una ferretería o se presenta una emergencia,,,tonton

Solo son ideas para un emergencia!!!

Respeto la opinión de cada persona, pero si fuese un caso de emergencia o necesidad, todos tenemos pistolas de calor en nuestras casas? Otra pregunta. El calor que irradia no daña la conexión entre la manguera y su terminal?

Muchas gracias amigo y gracias por el apoyo un gusto leer este tipo de comentarios🤜🏻🤛🏻, bendiciones 🙏 Saludos!

Muchas gracias amigo Luis un gran saludo 🤝

Gracias amigo

Gracias Oscar 🤝

obrigado Abel

Ufff que buen comentario gracias amigo y gracias por entender la finalidad del vídeo, Saludos! Epigmenio

that's right friend the need leads us to do this, thank you very much friend