Fiat 500 BCM replace/clone - LOCKED MCU

No video

Fiat 500 BCM replace/clone - LOCKED MCU | cannot be read

Рет қаралды 8,914

Autodiag OBD

Күн бұрын

You can buy all the tools that i use and test for many years (tested tools): AutodiagOBD.com

Пікірлер: 25

@gaineredison390 11 ай бұрын

Wow!!!! How do you manage to accurately aline the Chip all pin, on all 4 sides as you solder at the same time!!!!!! 🤪😮 In fact you have work.

@chrisi1909 10 ай бұрын

I think I/O Terminal Fiat BSI 2 can read Delphi BSI with 70F3379 ? But great soldering skills you have !

@guapo4518 10 ай бұрын

Did you read and saved the configuration file? If so, can you please share your procedure, utilities and tools you used. Thank you.

@user-gd4ro3wg6x 6 ай бұрын

Hello Brother, My BMC is locked . Alarm set off, lost all keys. Do you recommend to fix or replace? Thank you in advance.

@Menzanoxx 3 ай бұрын

It work for Alfa Romeo Giulia BCM?

@sara78130 2 ай бұрын

Hi what temperature u use it

@pvc988 11 ай бұрын

I am suprised they didn't fill entire thing with epoxy.

@autodiagobd 11 ай бұрын

You’re right!

@A_Haarsma 5 ай бұрын

Good video. Question, does the BCM also contain IMMO data?

@yanchistyakov6969 5 ай бұрын

Yes

@sara78130 2 ай бұрын

Yes

@MrNomad127 10 ай бұрын

Hello, great job. I have a similar BCM. But I can't manage to separate the two PCBs. How do you remove the Press-fit pins? Otherwise, could you perform the same procedure on my BCM?

@autodiagobd 10 ай бұрын

Yes. I can do it. I will make a video about it.

@MrNomad127 10 ай бұрын

I could contact you by email, to find out if you can do the same thing on my BCM.

@autodiagobd 10 ай бұрын

@@MrNomad127 yes

@juliordzMTBB 11 ай бұрын

Did this solution work? I May have a problem which this might be the only solution. 😢

@WeAreChecking 9 ай бұрын

What's the issue you're running into?

@juliordzMTBB 9 ай бұрын

My BCM doesn't' recognize the tailgate switch signal, and doesn't open the tailgate (switch and cabling are confirmed OK). Everything works well with the mechanic's "computer simulator". Apparently, the input hardware is damaged. I bought a used BCM, and it cannot be used for cloning, because it's locked.@@WeAreChecking