Fiat 500 Classic - Part 7 - Front spindles restoration
Рет қаралды 16,678
3 жыл бұрынRebuilt the spindles for the little Fiat. They were modified to use larger bushings, so I took them to a machine shop to fit new steel bushings that can house the original brass ones. The parts were sandblasted and painted.
Music from Tunetank.com
RocknStock - Dynamic Power (Copyright Free Music)
Download free httpstunetank.comt1fv81885-dynamic-power
@ceesvandervelde136 Жыл бұрын
.. nice 🐶
@stevemicheli8800 Жыл бұрын
How did you get the kingpin out of this assembly?
@AircooledProject Жыл бұрын
There's a safety pin installed in the knuckle, you can see me hammer it in at the end. You need to remove that and then hammer the king pin out.
@stevemicheli8800 Жыл бұрын
@@AircooledProject I got that safety pin out but the kingpin must really be stuck. I may need a sledgehammer to dislodge it, lol. Could it be that hard to drive out, in your opinion?
@AircooledProject Жыл бұрын
I don't have much experience with this. I only rebuilt this set, and the pin was pretty easy to get out. I guess if the car sat for a long time and there's lots of rust, it could get stuck. Try heating the outside of the knuckle.
@stevemicheli8800 Жыл бұрын
@@AircooledProject will do. Thanks for your help and quick replies. Much appreciated.
@AircooledProject Жыл бұрын
No problem. Good luck with your project!
Sergio Outdoors
Рет қаралды 88 МЛН
ISSEI / いっせい
Рет қаралды 87 МЛН
Aircooled Project
Рет қаралды 15 М.
Clement
Рет қаралды 6 М.
Axel Gerstl Fiat 500 & 126 Ersatzteile
Рет қаралды 11 М.
BIGBRO TV
Рет қаралды 1,9 МЛН
MotoRaido
Рет қаралды 1,2 МЛН
Sash Dun
Рет қаралды 14 МЛН