Fiber Optic Fire Table Build.

Рет қаралды 46,678

Күн бұрын

I built a concrete fire table with embedded fiber optic strands and led under lighting. #fire pit #fiber optics #concrete #fire table #ledlights
00:00 Intro
00:31 Proof of concept
02:01 Fiber light tests
02:20 Form Building
04:07 Wind Shielding form
04:35 Super Glue Fiber Strands
05:03 Concrete Pour
06:29 Fiber Reinforcement
06:48 Demolding
07:01 First Look
07:30 Sanding top and sealer
08:04 Building the base
08:45 Final Product shots
Concrete Mix
www.lowes.com/pd/QUIKRETE-San...
Concrete Additive
concretecountertopsolutions.c...
LED stuff
amzn.to/3qRXYrK
Smart Outlet
amzn.to/3qN7xIF
Fire top Kit
amzn.to/3CzaQWo
Fire Glass
amzn.to/3CzSpBa
Concrete Sealer
www.homedepot.com/p/BEHR-PREM...
Stone Mortor
www.homedepot.com/p/Quikrete-...
Metal Studs
www.lowes.com/pd/2-5-in-W-x-1...
Concrete Boards
www.lowes.com/pd/DUROCK-Brand...
Instagram
/ ifalexcan
Twitter
/ ifalexcan
TikTok
www.tiktok.com/@ifalexcan?lan...
About Me
about.me/hammer

Пікірлер: 24

@foxgroup23 Жыл бұрын

😮 looks great!!!

@IfAlexCan 10 ай бұрын

Thanks! re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@adilmahmood574 5 ай бұрын

Superb work !

@IfAlexCan 5 ай бұрын

Thanks!

@robertpatterson8643 5 ай бұрын

Very nice job thanks for the Idea

@IfAlexCan 5 ай бұрын

Most welcome 😊

@kavettedickerson5617 Жыл бұрын

Very very nice job! I love the light strands. Nice touch. I'm scared of the "p" type of gas. Used to only do wood. However, I only want the "forbidden word" table, for this upcoming season. So, I have to face my fears. Your video, and ☀️ makes people want to do more than any other time of the year! 👍 Great job! 😉

@IfAlexCan 10 ай бұрын

Thanks! re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@jakejacobson2999 7 ай бұрын

Looks great. In hind sight you Gould be just used a grinder and done some plunge cut slits instead of leaving out the space for the vent. I just bought a house and think I’m gonna do this for my kitchen counters. Hopefully it doesn’t become a disaster lol

@IfAlexCan 7 ай бұрын

Hey Jake, thanks for the suggestion. So I'm clear, your saying to skin the whole box with the concrete faux stone and use a plunge router with a masonry bit to cut the square vent hole out ? The tile are thick and uneven might be a struggle. But doing fiber optics on your kitchen counter would be awesome! good luck. Hit me up if you need more advice, glad to help

@jakejacobson2999 7 ай бұрын

@@IfAlexCan yeah that’s what I would do. Or just plunge it with a diamond blade on an angle grinder. I’ve done it before in bathrooms to make air vents instead of putting in the white metal ones. But yeah I’m pretty excited to try it. I think I might try to make a dining room table first for a trial run. The only issue I really see with the kitchen counters will be I guess I’ll have to string up the fiber optics and pour the concrete and then come back after it dries and cut them and resurface the concrete. I don’t really see any other way to do it since I’ll be pouring them in place on the counters lol. Unless you have another suggestion

@IfAlexCan 7 ай бұрын

If your going to try pour in place with fiber optics you'll need to somehow suspend each optic strand facing upright in wet concrete (this is the hard part). Then trim and finish after it's dry.

@MrHarobikes Жыл бұрын

Always wanted to do something like this. Just don’t have the experience Awesome job! Only question I have is this table hooked up to a gas line or is this a 20lb tank hook up? If so how do you change out the tanks?

@IfAlexCan 10 ай бұрын

I used straight line gas. I've seen others make it taller to fit a tank. re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@sk8sbowlingreviews Жыл бұрын

Looks awesome! Where did you order your optic strands and controller?

@IfAlexCan 10 ай бұрын

I used this one. www.amazon.com/dp/B07Q5YC7WQ/ref=sspa_dk_detail_2?ie=UTF8&pd_rd_i=B07Q5YC7WQp13NParams&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1 re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@ryanpedersen4715 Жыл бұрын

Can you add links to all the equipment and supplies in the description?

@IfAlexCan 10 ай бұрын

Done re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@user-vq7oo3ni3l Жыл бұрын

To build that project what would you say your budget was? Just a rough estimate

@IfAlexCan 10 ай бұрын

Budget was about $1200. re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@reubenmcgee1430 Жыл бұрын

May I get your contact Info..??

@IfAlexCan 10 ай бұрын

Alex@ifalexcansocanyou.com re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!

@dmsheckler Жыл бұрын

Where did you source your control panel for the gas? I can only find a spark ignition and key combo rather than the one you have with a control knob. Great video!

@IfAlexCan 10 ай бұрын

I used this one www.amazon.com/QuliMetal-Stainless-Rectangular-H-Shaped-Ignition/dp/B08KZJD9LQ/ref=sr_1_5?keywords=fire%2Btable%2Bkit&qid=1694132342&sr=8-5&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0&th=1 re-instating this comment as You Tube cleared them all out after converting the channel to a brand channel. Thanks again for the comment!