Рет қаралды 14,937
In this video we went out and visited with Chris Bauer at Bauer Surfboards in Port Angeles. Chris was kind enough to let us video him doing a freelap bottom lam on this longboard and share it with you all.
Some of the materials used in this video:
3M Squeegee
7533 x 30" 5.6oz Fiberglass Fabric (referred to commonly as 6oz glass) fiberglasssupply.com/style-75...
2880 Polyester Hybrid Surfboard Resin
MEKP fiberglasssupply.com/polyeste...
Catalyst Dispenser fiberglasssupply.com/32-oz-x-...
Respirator fiberglasssupply.com/safety/r...
Gloves and Tyvek Suits fiberglasssupply.com/safety/g...
Basic Steps:
1. Dust off Blank
2. Cut Fin Patch
3. Cut Fiberglass Fabric and dart corners/ends
4. Apply Logos
5. Wetout bottom
6. Wetout Laps
7. Paste up laps
8. Work out any runs, lumps or bumps on rails
9. Double check that overlaps are tight and that there are no straggling fibers on deck