How to Change a Jigsaw Blade | Jigsaw Blade Installation

Рет қаралды 147,368

Күн бұрын

So you want to know how to change a jigsaw blade. Here's a video on How to Change a Circular Saw Blade • How to Change a Circul...
This video covers a few of the more common types of jigsaw blade installation as well as the two types of jigsaw blades; the U-shank and the T-shank blades. In this video we demonstrate changing on the jigsaw blade on a new Ryobi variable speed jigsaw, an older Black and Decker variable speed jigsaw, and an old Bosch variable speed jigsaw.
Merch - field-guide-to-diy.creator-sp...
FieldGuidetoDIY.com
/ fieldguidetodiy
/ fieldguidetodiy
/ fieldguidetodiy
#FieldGuidetoDIY
Watch these videos for some really good home improvement information:
How to Use JB Weld - • How to use JB Weld | J...
IKEA Blinds Installation - • IKEA Blinds Installati...
Blink Video Doorbell Installation & Setup - • How to Install & Set U...
SUBSCRIBE for more helpful videos.
Bosch GSC12SD Compound Chop Saw - amzn.to/3Avj2VP
Oshlun Laser Guide - amzn.to/2KPCjvW
Makita Corded Drill - amzn.to/325VrKV
Ryobi Cordless Circular Saw - amzn.to/2Mlx1bE
Ryobi Cordless Drill Driver - amzn.to/3641a6z
Swanson Saw Guide - amzn.to/3sQ7ibx
Kreg Pocket Hole Jig - amzn.to/2MlV3TW
Kreg Concealed Hinge Jig - amzn.to/3o9XXZb
Kreg Adjustable Shelving Jig - amzn.to/3qNHHyN
amazon.com/shop/FieldGuidetoDIY
"As an Amazon associate, I earn from qualifying purchases."

Пікірлер: 57

@FieldGuidetoDIY 2 жыл бұрын

How to Change a Circular Saw Blade kzfaq.info/get/bejne/iL6Jh9OWm7Sym30.html

@bari2883 8 ай бұрын

I’ve got a black and decker and bought the t blade instead of the u shank but I loosened the screws too much and the catcher came out. Which way is the right way too put it back in.

@sarahhodson2316 Жыл бұрын

Thanks for the quick clear video! Just needed to change the blade on my old Bosch jigsaw and I searched through many before I found this one!

@FieldGuidetoDIY Жыл бұрын

Absolutely Sarah. So glad I could help. Thanks so much for watching. Please let me know if you have any questions or recommendations for the channel.

@theinnover4 2 жыл бұрын

This is the great help for newbie like us....!!!!! Thanks a lot...!!!!!

@FieldGuidetoDIY 2 жыл бұрын

Innover, thanks so much for watching. I’m so glad it helped!

@mamemckee2190 2 жыл бұрын

Thanks! Very helpful.

@FieldGuidetoDIY 2 жыл бұрын

So glad it helped. Please let me know if you have any questions or suggestions. Thanks so much for watching.

@AB-ot3bc 2 жыл бұрын

Thanks for the help, I was fixing an old bosch jigsaw that was my late father in laws and needed to know how to get the blade off.

@FieldGuidetoDIY 2 жыл бұрын

I'm say glad it helped. Any guesses where I got this Bosch? You got it. I got it from my dad when he passed. Thanks so much for watching!

@CichlidCharmer Жыл бұрын

Clear and well done!

@FieldGuidetoDIY Жыл бұрын

I greatly appreciate that Cichlid Charmer. I'm so glad you found it helpful. Thanks so much for watching!

@Deseko Күн бұрын

Thanks youtube dad

@FieldGuidetoDIY Күн бұрын

Aw, you are quite welcome. I am so glad to help!

@johnchristopher1463 7 ай бұрын

Thank you.

@FieldGuidetoDIY 7 ай бұрын

Aw, you are quite welcome, John. So glad it helped!

@1979lucius Жыл бұрын

Man! I couldn’t figure out how to change the blade of this Bosch and I find out that my flat long screwdriver diamond head doesn’t fit, only the head. Thanks for the video, I couldn’t find any video or manual in Spanish, thank you much!

@FieldGuidetoDIY Жыл бұрын

Absolutely Fernando. I’m so glad it helped. Thanks for letting me know and thanks so much for watching.

@garciaortiz831 8 ай бұрын

Thnakyou for the help man you saves me

@FieldGuidetoDIY 8 ай бұрын

You are quite welcome. I appreciate the feedback and thanks so much for watching.

@patrickholder8403 3 жыл бұрын

Thanks! Straight to the point. Very helpful

@FieldGuidetoDIY 3 жыл бұрын

You are quite welcome Patrick. So glad it helped. Thanks so much for watching!

@Sinjinator 2 жыл бұрын

Wow, Boschhhhhhhh

@francescaqueiroz5534 5 ай бұрын

Thank you!

@FieldGuidetoDIY 5 ай бұрын

Absolutely! You are quite welcome. Thanks so much for watching!

@manjulawijesiri105 2 жыл бұрын

thank you very much..

@FieldGuidetoDIY 2 жыл бұрын

You are quite welcome. I am so glad it helped. Please let me know if you have any questions or suggestions.

@HEITOL511 2 жыл бұрын

Excelente!!!!! Muchas gracias!!!!!!👏👏👏👏👏👏🙏🙏🙏🙏🙏🙏😁😁😁😁

@FieldGuidetoDIY 2 жыл бұрын

Me alegro de que haya ayudado. Gracias por ver.

@forgotMyUsername100 2 жыл бұрын

Bosch, what were you thinking? I have to look this up every time I need to change a blade on my Bosch -- thanks for the helpful & succinct video, and now I know how much better others got the blade-change mechanism.

@FieldGuidetoDIY 2 жыл бұрын

You are quite welcome ForgotMyUsername. I’m so glad it helped. My Bosch was inherited and it’s a lot more reliable than my old Black and Decker. Thanks for watching.

@forgotMyUsername100 2 жыл бұрын

@@FieldGuidetoDIY my Bosch is also inherited. And I just found the screwdriver I bought last time I needed to change the blade 😂

@drssdhillon2692 2 жыл бұрын

Good video. Mine has T-shank. You can change with a lever but doesn't look secure. It seems lose... Can I do with both lever and Allen ranch.... Thanks.

@FieldGuidetoDIY 2 жыл бұрын

Doc, your blade may not be seated properly. It should lock in place fairly securely. Try re-inserting it and then see if you can rotate the blade. I found I had to insert it 90 degrees and then release the collar which rotated it into correct position. If you have an Allen wrench set screw on your model, it may be a two-fold approach to locking the blade in place. Please let me know how it goes.

@Seemless-vh3oc Жыл бұрын

Saved me

@FieldGuidetoDIY Жыл бұрын

Aww, so glad it helped, Seemless. Thanks for letting me know and thanks so much for watching.

@FieldGuidetoDIY 3 жыл бұрын

What model jigsaw do you own? Does it take a U-shank or a T-shank blade?

@drssdhillon2692 2 жыл бұрын

Mine has T-shank. You can change with a lever but doesn't look secure. It seems lose... Can I do with both lever and Allen ranch....

@ladyeyeestilles2694 Жыл бұрын

What can I do if the screw missing?

@FieldGuidetoDIY Жыл бұрын

LadyEye, see if you have a comparable screw in a hardware jar. You may have to cut new threads. The ideal is to take the saw to the local hardware store and pick up a replacement screw. Ask them for a “set screw”. It will either have a Philips head or an Allen head. Let me know if this helps.

@bloomingbeats1318 2 жыл бұрын

So no U shank demo?

@FieldGuidetoDIY 2 жыл бұрын

Sorry Ethan. I didn’t have a U-shank blade on me. Coming soon though. I promise. You can see how a U-shank blade would slide in the groove and the set screw just tightens down on it. Let me know if you have any questions. Thanks so much for watching!

@bigmiken5472 Жыл бұрын

Diablo says that their blades work in both t shank and u shanks jig saws...

@FieldGuidetoDIY Жыл бұрын

True BigMike. You can tighten a T shank blade in a U shank saw but the collar often doesn’t let the tabs seat properly. In my experience the appropriate blade for that type of saw is best. Thanks so for watching and for commenting. I’m gonna check that out and test that in a future video.

@siamakp1207 3 жыл бұрын

How do i know what shank my jigsaw use? I bought one but the instruction are in a language that i don't understand, and suggestion????

@FieldGuidetoDIY 3 жыл бұрын

Siamak, does it have grooves in the round collar like the one pictured? Or, does it have set screws that screw in from the side?

@siamakp1207 3 жыл бұрын

@@FieldGuidetoDIY Thanks for reply, so it has 2 screw in front and I got a Hex Key, L Shape with the device, the thing is there is a free blade on my box (u-type) but my friend both the exact device from same seller, his device go a (t-type) free blade with it that why we got confuse , I found this video over internet that the exact jigsaw i have, as you see in the video, the guy has 2 blade, the black one is T-type and the blue one is U-type, sorry for reply I'm so confuse :( kzfaq.info/get/bejne/jM96n7hhtceVqZ8.html

@FieldGuidetoDIY 3 жыл бұрын

@@siamakp1207 it sounds like you have a U shank. A T shank will not fit correctly unless you trim the ears off the shank. I hope this helps.

@siamakp1207 3 жыл бұрын

@@FieldGuidetoDIY cool, thanks for the help :)

@paulrichardson8583 Жыл бұрын

So you say you put the wrong blade (T shank) in the older model. Are they interchangeable in the older models or are they not? Must not be if you said you put the wrong one in!!!

@FieldGuidetoDIY Жыл бұрын

Good question Paul. Although the T-shank jigsaw blade fits in my Black and Decker which my model is desgned for the U-shank, it is still kinda “sloppy” in there. Although it fits I really have to tighten down on the set screw more than normal. Should I have mentioned that in the video? Probably so. Maybe the next one. Thanks so much for watching. I appreciate it. I hope you got something from it.