Figuring out a Williams Big Guns pinball machine switch issue

No video

Figuring out a Williams Big Guns pinball machine switch issue

Рет қаралды 355

10 ай бұрын

Kind of a funny switch problem on Williams Big Guns related to the switch matrix. A slight oversight in my first round of troubleshooting had me digging deeper into the game.
Please help this KZfaq channel with a like and a subscribe (and maybe leave a comment). It helps the algorithm recommend these videos to more people.
Follow the arcade on social media:
TikTok: / pinballorama
Twitch: / pinballorama
Instagram: / pinballorama
Facebook: / pinballorama
Seven's Pinballorama - Prince Edward Island, Canada.
Website: www.pinballorama.com

Пікірлер: 9

@dnorman2134 9 ай бұрын

Back when I was a service tech for an operator, I was given a service call from another operator 150km away because of the same type of thing that they couldn't figure out. It was a Harley Davidson. One row had half of the switches not working. This era of Stern machines use 0.100' IDC molex connectors on many of the switch boards where the connector was just placed on a pair of wires in a certain spot. What had happened was when the IDC was installed, the punch down process had cut several strands and it eventually broke the rest over time. The insulation, or what was left of it, was enough to hold the wire in place. Good job on finding your issues. Oddly enough, I have a similar tracer that's part of my network cable identifier kit. However, I've never needed to trace within a pinball machine. But it's a good idea.

@ralphs007 Ай бұрын

I just found your channel and I really enjoyed how you explained the switch matrix. I'd like to see another video where you go into it a little deeper. Thanks again,I now have a little better understanding of the switch matrix,good stuff!

@SevensPinballorama Ай бұрын

I have another machine with a switch matrix issue and I'm making a video on it. This time, we'll video the troubleshooting as well. I'm hoping to have that out in a few weeks. We're in our busy season right now so finding time to make videos AND run the arcade gets thin.

@danijelcar5184 9 ай бұрын

Great you have find and fix the problem on Big Guns 😎👍

@pezjohnson 9 ай бұрын

Good explanation. Nice tip on the wire tracing tool. Might have to look into that.

@SevensPinballorama 9 ай бұрын

It really helped on this machine. I would have found the disconnected wire eventually. Visually it looked connected and a slight tug in a later inspection would have found it. I just missed it because I was rushing. But if this were actually a broken wire, the toner would help narrow its location down. I will say, the good wire toners are not that expensive. Under $200. There are cheap ones on amazon for $20. Avoid those. They don't work well enough. The one I have is an old school telco standard made by Progressive Electronics - The 200EP. I've had it for over 20 years and it's still going strong. I've used it to tone wires, in some cases, up 10+ stories in a building.