Check out Microtrackhoe.com for more info and pricing.

I like it when sellers understand customers and give them products with flexibility rather than locking you into their company and it's continued success where your SOL if they go out of business.

Congrats!! I have been following K & R for a little bit now. Can’t wait to hear your thought after you get to use it!

What are all these regular people do for a living for $32,500 to be affordable? I guess compared to a JD or case it’s “affordable.”

personally have a KYMRON XH22D and its been a workhorse for over a year now with 0 problems!

Thanks for this video - can’t wait to see more on this unit. If you like it, I’m 100% buying the 65 hp cab model

I made the same trip, 8 hrs. One way. Great machine, great price. I did a lot of research, for the money kymron is the one to buy.

More companies need to operate like this and stop with the planned obsolescence

Great video!!! I watched it and bought at 26 and a roller. Thanks !!

In the market myself. Thanks for sharing your experience. Will check them out

Cool to see the development. 811 for all excavation! Thanks for sharing.

Congrats, my friend. Hope it works out for ya', and don't forget to grease it!

Looks good, Kyle !!! I am an OKIE.... ha ha born in Kingfisher, OK (you'll have to look that one up on a map...)

Congrats on the excavator purchase! Can't wait to see how you knock the new off of it.

Super cool video, I've actually started talking to Ron 3 weeks ago and I'm about to finalize my deal on a xh22d

Ok got a cheap Chinese brand and yea for light work they are ok but they should spec them out with the stronger upgrades. You can literally buy them mini exc in every state under a different name but all come from the same place over seas!

I rented a deere 26g last week Loved it. Much more efficient than my kioti tlb

Looks ok, but a 310 john deere would work better for you than a mini ex, unless you have a skid loader of some fashion to back it up. Wouldnt trade my 710 for it but thats my thoughts. You dig the way you want and I will to, at the end of the day I will have a cold coors light for ya, you will have to bring you own keystone. Have fun and be safe.

Nice machines! Congratulations

Nice looking machine, if I wasn’t so old ide get one

I've had and still have a bunch of equipment. In 2023 there are no more secrets in excavator design. If these machines are built off of proven platform design with off the shelf parts...chill out. You can source the parts. The only special stuff will be less typically broken parts like the frame, cab, dashboard for gauges and such. JB Weld. Plastic welding. Metal Welding. Some machine shop work. Of course it won't have smart controls that learn your digging style with the joysticks and such...but who care. Learn how to run a machine and stay within its limits. Just hooe nothing overheats or flies apart. If you save 25% in initial cost then if it's 75% as good as the machine you couldn't afford then you've gotten what you should expect. If it's 90% as good and the machines you couldn't afford at 25% more it's a very good value!

You can buy 1 ton class generic Chinese machines similar to this for 4500-7000 with cab, hydraulic thumb and various implements for $4500 to $7000. That's less than the backhoe attachment costs for our tractor and way more useful. You will have to maintain it yourself, but it's built pretty simple like an old oversize lawnmower or a 1950 forklift. Which isn't all bad.

Nice rig. Can't wait to see it dig!

Good work young man, shout out to Ron.

Big problem I see for me is I do not live near Oklahoma.

Nice! Never heard of them. If my 580 ever bites the dust I may give that big boy a look! Now go dig a hole and fill it back in...I know that's the first thing you did.

Looks good, sounds like you will put it to good use.

Should have looked into sany sy26u same price 5 year warranty and they do 300 mile round trip warranty work no charge

Great video's, so glad you bought one made in America, thank you so much for that.

First thing that’s gonna get ripped off are those hoses flared out by the thumb I’d say that was a poor design

Great purchase!

Great video mate!

Thanks for making and sharing this video! Did you mention the cost? I missed it.

Now I need to get you a track cleaning tool!! Looking forward to more videos on this!

My wife is not watching this, otherwise she'll want one.

Where did you get the Hitchfrom what to gauge you know

I just went over and checked out the excavators on the site they looked very stout can’t wait to see you put it through it’s paces. Very affordable too. With that said a video with out the keystone girl and no keystone yikes lol prob gona lose some viewers bud 🤣🤣 catch u on the next one

Wow,, nice for you.

Looks like a nice machine

That is nice!!

Lol. Here's the big question. How long have you and the owner of kymron been buddies? My guess is quite awhile lol.

Nice machine!!!

I'm currently in the process of deciding between two different mini excavators: the one you acquired from Kymron and the BH40 offered by Groundhog. I'm curious to know if you are entirely satisfied with your 26D model. Thanks for your input, and I appreciate your skill and sense of humor.

Sweet toy! Doesn't fill it up with fuel? Cheapskate 😂 Can't wait to sww what trouble you get into with it. Don't hit the house this time. 😅😅

Hell yea ! Nice Get to work

Congratulations!👍🏻

So , is this machine a Chain drive from the hydraulic motor to the tracks ?

Everyone freaks out when they see the cost of gas in Oklahoma! That's what it should cost all across the US!

Congratz on the new equipment... does that blade have independent vertical controls to cut lower on either side? Really helps with carving swales. 👍🍻

Did he say how much it was

when you load heavy on the trailer - put it as front as you can.

What did that dealership open like a week earlier? Was the concrete even dry?

Nice! so whats going to be your first bucket attachment?

3 seconds in and you fall. Lol. I’m very interested in the review.

For $30k they should have filled the fuel tank, geewhizz.

what was the cost?

Bomb shelter in the corner of the shop?

what is the discount code?

Зплипуха китайская какая то. Один плюс, новая)

The owner of KYMRON look like he doesn’t know anything about he own michenes👀

for a new machine, when the hood was raised, whats up with all the dust ?, it looks like it has been used already, was this a used machine ?. as for it being china built ?, yeah..i'll stick with a shovel over china any day..lol. but good luck with it !.

Your thumbnail says Affordable. Your title says Finally an excavator homeowners can Afford, but you never say how much it was….thanks for that! This is why I clicked on it, I thought for sure you would say what you paid for it. 🙄

Video should be marked as an advertisement

Good luck getting that serviced anywhere. 😆

Oh, the title was misleading, it should’ve been “that millionaire homeowners can afford”, my bad.

Welp, seems like this was all a big misunderstanding. KZfaq did its thing and I blamed Kyle for it. -Well, OK. I understand. I really like your videos. But deleting my comment doesn't make it invalid. It just shows, how you deal with critique. As I already wrote: I don't know, if you're aware. Now I know.-

I dont get it. This guy is talking down in chinese machines... but he is buying the exact same machine and just having them put his label on them.

I don’t go down the idiot rabbit hole when price isn’t mentioned but affordabe is in the title...

Ok for less than 30 I can buy a big name used one with decades of sales and customer support or yea buy off name one. But your unknown name brand you don’t have dealers with your equipment it sounds like so every time someone has major issues and have to send it to you what is that cost plus repair half the value but I buy cheap china brand for what 15000 brand new and some of those do have big name motor so parts aren’t hard to find and even china parts are not to hard either. I’m in farm country I have 4 shops to fix anyone one and would deliver to them or they come out and do the work at location and some times that is most 2 day wait. So to be honest until you get a name and location or dealer near me I’ll rather buy used for my needs or if I want new I wanna buy china brand cuz don’t know your build just like I don’t know the china build but with one I could save 10’s of thousands on it

Boy you really know how to drag out a video. Btw 32k isn’t affordable for us normies

If i buy a unassembled chainsaw from CHINA and assemble it in the US does it really make the quality better?

Why are you always falling down in your videos - seems really unnecessary

why does the muzic have to suck so hard?

Chinese excavator lol.

somehow every single video these days plays Rap..... wtf?

chinese …….

Just to correct something he said about the name brand Yanmar engine. Just had the suction control valve go out on my 4TNV98 Yanmar and had to order it from .........Germany. Nobody makes and keeps parts stateside, not even the "name brand." It costs more to warehouse parts in the USA than any other country on earth. Also the weigh safe is the biggest piece of garbage ever made.

so never explained how it's affordable at all. so you lie

Yeah, if you notice people that say the normal people are average people can now afford their own excavator at 32,500 has a quarter million dollar house $100,000 garage and another half million dollars in toys I’m sure people like you can’t afford 32,500 for a freaking personal excavator so on out of touch with reality