Finally REBUILDING the AE86 rear end! Rough Surprise

Рет қаралды 254

8 күн бұрын

after owning this AE86 for over 4 years I have finally decided to rebuild the rear end bearings. I'm attempting to make it much more quiet as its very loud while driving. I repainted the rear axle too, but run into some unexpected surprises.

Пікірлер: 12

@alexander_ford_ 6 күн бұрын

Comment below what you would like to see more videos of next!

@DanhPhan Күн бұрын

So much work man! I didn't want to mess with my diff so I brought my third member to a local race prep shop to rebuild, @ramseyraceprep in Houston. Basically almost replaced everything kaaz 1.5, weir 4.3 gear set, weir solid pinion spacer, and koyo bearings/seal. I would def recommend the weir 4.3 ring and pinion (around $400 shipped)... mine was sorta worn and it was making a bit of noise... but after replacing, its definitely more quiet and oddly enough the car doesn't vibrate as much over 70mph.

@alexander_ford_ Күн бұрын

@@DanhPhan thanks for the info man! Do you still have rear end noise ? You said “more quiet” also did you have anything checked with 4 link to adjust pinion angle or was the rebuild all it took ? Good to know on the weir stuff I was kinda hesitant on that vs oem and the price almost doubles with Toyota stuff

@DanhPhan Күн бұрын

@@alexander_ford_ my 4-link was dialed in for pinion angle before the diff rebuild. it's definitely quieter than before... there was a little whine. i've also replaced the axles with panic ones as well... so check your axle bearings too. most guys i know go the weir route for a bulletproof rear end... but not many drive their ae86s daily.

@DanhPhan Күн бұрын

this is on the stock zenki lsd rear end before rebuild kzfaq.info/get/bejne/jsmIZa2Ft9THY40.html

@DanhPhan Күн бұрын

@@alexander_ford_ this is after the diff rebuild kzfaq.info/get/bejne/m6icq7d-19KbZJ8.html

@Just_a_space_cowboy 6 күн бұрын

25 ton press. Geeez, I have a 12 ton press that's worked for everything I've ever needed. Wild.

@alexander_ford_ 6 күн бұрын

@@Just_a_space_cowboy 12 might have done it, who knows. All I know is I defiantly wasn’t able to do it in the garage

@Just_a_space_cowboy 6 күн бұрын

@alexander_ford_ based on how long it struggled in that video with the 25 ton, I doubt my 12 ton press would have done it. It's nice to have friends like that!

@MarcusMatthews-l4p 5 күн бұрын

Was gonna ask if you replaced the ring and pinion gears. I’ve never been in an 86 with a gts rear end that hasn’t made noise. I even had a driveline shop professionally rebuild one. New bearings gears and seals and it still whined… Was hoping you had better luck than me!

@alexander_ford_ 5 күн бұрын

@@MarcusMatthews-l4p yeah that is what scares me man, same happened with David. My coupe and sons coupe are both completely quiet . Worried I’ll throw tons of money at it and never make it quiet