Find Compatible Parts To Build A FPV Drone

Рет қаралды 9,854

Күн бұрын

🙋🏼‍♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑‍🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
If you feel like building a 5" Freestyle Drone is too hard, you just need the right guidance.
So, I built a course with 71 highly detailed but simple modules, breaking down absolutely everything! They're can't be anything missing, if there is, I will add it. How to get a List of Parts to Build Your First Done
I know how overwhelming it can be to build your first FPV drone. I was in the same boat when I first started out, and I made every mistake in the book. In this video, I'll share the key things I have learned so you can avoid the same mistakes!
This video is part of a series sponsored by SpeedyBee, T-Motor & FlyFish RC.

Пікірлер: 39

@DarrenAllatt 9 ай бұрын

@canadiangemstones7636 27 күн бұрын

Very helpful!

@Bissy156 2 ай бұрын

thank you so much! this helped me alot with choosing my build!

@HalfChrome Жыл бұрын

This is excellent.

@DarrenAllatt Жыл бұрын

Thanks Jack

@jackson-aka2gs749 Жыл бұрын

thank you Darren, you saved me a shite load of pain and money.

@DarrenAllatt Жыл бұрын

You are welcome

@evansamson2703 Жыл бұрын

I would recommend anyone getting into fpv just go for the hd zero goggles don’t not go for dji

@theowenperson2780 Жыл бұрын

A smoke stopper is also a really good device to get, it disconnects your battery if you accidently bridge your solder. That $6 plug can save your $100 FC

@DarrenAllatt Жыл бұрын

Absolutely

@DarrenAllatt 11 ай бұрын

Learn to Build a 5" Freestyle FPV Drone 🎓 www.darrenfpv.com/buildmasterclass-5freestyle

@MadDragon75 Жыл бұрын

Great advice! Coincidentally I'm building a 4-in with the same components that you are just showing just in 20x20. One thing I've known over the years about soldering is make sure the tip is clean before you ever even get close to your board. If you tin your wires and you see black specks, make sure you clean your tip before you get it near the board. A fine tip soldering iron is recommended. I see other people are picking up on little things you left out like smoke stoppers ...but you did show a picture of one.

@DarrenAllatt Жыл бұрын

I think I included it in the on screen text or did I miss that? Nice build! Which 20x20 are you using?

@MadDragon75 Жыл бұрын

@@DarrenAllatt you did put that on the screen but I noticed in the comment somebody said that you didn't mention it. I guess for the people that are hearing impaired I bought I just got it in the mail today a speedy bee stack mini 35 amp 3 to 6s the f7. And I have the speedy vtx 800 and I bought the Joshua Bardwell edition Phoenix 2. I'm building it on an apex 4-in. I also bought the Radio Master Express lrs TX 12 and I'm updating the firmware on it right now.

@DarrenAllatt Жыл бұрын

@@MadDragon75 it’s a balancing act between how much I can say vs retention, so I’ll use images and text to try to cover the things I can’t say or to show additional stuff. Nice. Apex 4” is sweet! You can run 3.5” props on that and it’s a very capable 3.5” which should have more 5” feel. Good choice in stack too!

@MadDragon75 Жыл бұрын

@@DarrenAllatt I've been running Gemfan 4 inch props with winglets and the HQ props that came with my dolphin on 1507 Motors on 4S Packs and love it... So I bought brother Hobby 1507's at the higher KV so I can run 6s. Now all I need is a 6S charger and a few 6S packs. 😏🤙

@MadDragon75 Жыл бұрын

@@DarrenAllatt as far as the channel and being a content creator, I fully understand and I sympathize with you actually I empathize with you. Like I tell people all the time you can't make a video to please everybody. Just keep doing you. 😏👍

@ralphmoran 11 ай бұрын

Thanks for sharing these videos. I have a question, what does OS this drone have? Could I program it with MicroPython? Or, what other programming language?

@DarrenAllatt 11 ай бұрын

You are welcome. Thanks for watching. They all use Betaflight which does not require any programming at all, you just use the GUI configurator to change the settings and pid controller. Betaflight is open source so the code is all on GitHub if you wanted to check it out But these are all no coding necessary for the end users Only the devs on the Betaflight end do the coding.

@joeriley1955 Жыл бұрын

so lets say i want to build a 6s drone, what battery, props and motors would you recommend?

@DarrenAllatt Жыл бұрын

6S is only the power input. Is it a 3” 6S drone or 5” 6S Drone? If it’s a 5” 6S Freestyle Drone watch this - kzfaq.info/get/bejne/a8uUadxj183FoWw.html

@owensspace Жыл бұрын

I hear buzzing in one ear

@DarrenAllatt Жыл бұрын

Yep sorry. Issue with the Audio. Have corrected it for future videos

@krisnrg Жыл бұрын

All sponsored. No thanks

@DarrenAllatt Жыл бұрын

I don’t think you know how MY sponsorships work. I approached these companies and asked for the specific parts I was going to purchase. If they said no, then, I’d still buy them. Like the DJI O3 Air Unit and ELRS Receiver. Also, please take notice as to how I didn’t tell you they’re the best products ever and you should buy them. Rather, these are the products in the build, come along for the ride.