Glad the video was so helpful. I love teaching and it’s always nice to know that viewers understand the techniques. I’m always happy to answer questions too. Thanks for watching Serger Tip Clips!

Jennifer StJohn thank you so much!

Thanks Patsy. Glad the Tip Clips are helpful and thanks for subscribing!

Beth P thanks Beth. Understanding the various Serger components and how they work makes Serging fun and results predictable. But always make samples on scrap fabric to get your settings perfect before venturing onto your real project fabric. Let me know if you have questions. Will be delighted to help you and thanks for subscribing!

Jen Sellers hi Jen, you’re welcome and let me know if you have more questions. Stay safe and thanks for watching!

Wendy Stumbaugh thanks for watching and happy the “wait” is over!

Glad the videos are helpful, Mary. If you ever have questions, let me know. Thanks for watching!

Barbara Davie thanks for watching Barbara and if you have any questions,let me know!

Thanks Marthan. A good teacher needs a great student and that’s what you are! Thanks for watching Serger Tip Clips!

Hi Cindy, If you have any questions, send them along and will be delighted to help you. Thanks for watching!

J Cogar you’re welcome-thanks for watching!

Thanks for watching!

Northwest Quilters, Inc. Thanks for watching and the nice compliment !

Thank you. I meant to post this under my name and not the guild. Still love your videos!

Donna Bresnahan Hi Donna, it’s a cool technique but the best part is, it’s easy! Let me know if you have any questions and thanks for watching Serger Tip Clips!

Judy Rich great-I thought that was what you were looking for. Wine the threads are pulled to the wrong side, it locks them so they won’t unravel and it’s tidy. Thanks for watching Serger Tip Clips!

You're welcome, Glenda. If you have questions, send them along and thanks for watching Serger Tip Clips!

sleepdeficit2 you’re welcome.let me know if you have more questions. Will be happy to help and thanks for watching!

You’re welcome, Kiki. Let me know if you have any other questions and thanks for watching Serger Tip Clips!

linda holt-Hanlon thanks for watching Linda-let me know if you have questions!

It’s a great technique and glad you like it too. Thanks for watching!

Thanks For watching Serger Tip Clips and glad you like the technique, Julie!

It's a nifty technique and easy. Thanks for watching!

Elizabeth Miller How to Finish coverstitching in the round is the most asked question in workshops. Glad it was helpful and thanks for watching Elizabeth!

Kelly Hipkins hi Kelly, it works and is easy too. Thanks for watching Serger Tip Clips!

Yes it is Janey. And a clear foot is extremely helpful too. Thanks for watching Serger Tip Clips!

Hi ChoccoCat , the “ over the hump” technique is included in my Coverstitch Workshop . That’s available in my store @gailpatrice.com. Thanks for watching Serger Tip Clips!

Sis Carmichael it sounds like the last stitch hasn’t completely formed and is resisting being pulled. Turn your handwheel toward you to finish the stitch. Then raise the needles to the highest position and continue the process as shown in the video. Another alternative is to have a scrap piece of fabric to stitch onto right from the end of your project fabric and clip the threads from that piece. But I think the first method is better. Please stay in touch if you’re still having a problem I’m here to help and want to hear from you. Thanks! (I know you’ll get the hang of it-it just takes practice!👍🏻)

Janene Flanagan ahh Hi Janene, that fabric guide fits the Babylock Ovation and Triumph sergers. Check your serger brand’s website for the fabric guide that is designed for your machine. You can usually find it in the accessories section of the manufacturer’s website. Thanks for watching!

Hi Rayne, It always makes me happy to hear that someone is expanding their serger horizons! For the double sided fusible web, I used SewKeyse tape. It is available in my web store. It doesn't wash out and does cut down the stretching on a hem. If you want a product that does completely wash out, I suggest Wonder Tape. It's available in large chain stores and your favorite sewing center. It's 1/4"-wide so it's wide enough for cover stitching. Let me know if you have more questions and I'll be happy to help. Glad you're protecting your skin too! Thanks for watching Serger Tip Clips.

That foot # is: BLE8-CCF. It's terrific for so many applications. Thanks for watching Serger Tip Clips!

I’m wondering if your needles aren’t up quite all the way and keeping the thread tension tight. Try it on scrap fabric and turn the hand wheel toward you until the needles are at the highest point. Then pull the thread straight back. Let me know if that helps. Also if you pinch the last stitch between your left thumb and index finger as you pull, it will also help. I’m on vacation right now, but have my iPad, so can answer quickly. Thanks for watching!

I used to stitch with the left needle left of the raw edge, but it often caused tunneling. The better way is to have both needles on the double layer. You might see a bit of the raw edge peeking out but from the public side, it will be perfect. Let me know if you have more questions and I’ll be happy to help you. Thanks for watching Serger Tip Clips!

Hi Imka, I'm glad it was helpful. If you have any other questions, please let me know and thanks for watching Serger Tip Clips!

@@GailPatriceDesign 👋😀

Hi Nancy, When flat locking in the round, you'll have to stitch over side seams. This might cause irregular stitching. Hand walk the machine in these areas. As you approach the first stitches in the "home stretch", also hand walk the last few stitches. When stitching is complete, raise the needles to the highest position. Raise the presser foot and loosen the needle and looper threads enough to allow you to easily pull the fabric out from under the presser foot. Clip the threads. Pull the fabric flat and press with a press cloth. Hope that helps, but let me know if you have more questions and thanks for watching!

Hi Alice, You don't need the blind hem foot. A seam guide is helpful but not necessary for a nice finish. Measure and cut the hem to 1-inch wide. Use a narrow coverstitch with the stitch length set on 3.0 - 3.5. (It depends on the weight of the fabric. Test on scrap fabric first.) Keep both needles in the double layer of the fabric to prevent tunneling. If the rayon is stretchy, you may need to increase the differential feed setting, but if it's woven, set it on "N". The tension settings should all be on normal settings. Always test on scrap fabric to be sure your stitch looks good and that your settings are correct. Let me know if you need more help. Thanks for watching!

Elise Fine yes it will work on your Janome CoverPro. Thanks for watching!

Bridget Bircher hi Bridget, you can stitch the same width as shown with the Ovation or Triumph. You have 3 needles so with C1, C2 and C3 threaded, you’d have a triple coverstitch. With C1 and C3 you’ll have a wide coverstitch. With C2 and either C1 or C3, a Narrow coverstitch. If you need more help let me know. (The only factor that determines stitch width in coverstitch mode is needle position.) You can stitch any width hem you desire. For perfect results, use a fabric guide.

That is a Babylock accessory. Thanks for watching Serger Tip Clips!

Kelly Hipkins hi Kelly, I was using a Babylock Ovation Serger in this Tip Clip. In more recent ones, I am Serging on a Triumph. Thanks for watching Serger Tip Clips!

Hi Lily, Would you send a photo of your skipped stitches? It is probably the needle. Use an ELx705 needle for coverstitching. Or if your fabric is knit, an ELx705 SUK needle may be better.Also tell me what brand and model serger you are using. I'll be happy to help you and thanks for watching Serger Tip Clips!

@@GailPatriceDesign Gracias por tomarte el tiempo de responder 🙏🏻😍 Dónde te envío la foto?😓

Hi Lilly, Send the photo to my email: gail@gailpatrice.com. I'll be happy to help! Where do you live?@@lillygarita6022

HI Suzy, I have a feeling that the needle threads aren't pulling to the wrong side of the fabric. Before you you "snap" the fabric from under the presser foot, are you snipping the needle threads and leaving enough length (about 4") to pull to the under side? When the needle threads are pulled to the underside, that's what locks in the stitches. If you would make a couple of samples and send pics, I might be able to troubleshoot better for you. Thanks for watching!

My machine is a combo-overlock and coverstitch capable. A coverstitch machine has one looper-the chain looper and can create wide, narrow and triple coverstitching (if it has 3 needle positions) as well as chain stitching. An overlock (4-thread) serger has an upper and lower looper but no chain looper. Let me know if you have more questions and thanks for watching Serger Tip Clips!

Hi Willeke, I used the Standard foot that came with the serger for this Tip Clip. You could also use the Cover/Chainstitch foot. I showed a comparison of them at the beginning of the video.Let me know if you have more questions and thanks for watching Serger Tip Clips!

Thanks for watching, Bedette!

It's welcome teacher.

Nina Egenreider hi Nina, that guide fits the Babylock Ovation and Triumph models and you can purchase at your local dealer. It’s well designed, isn’t it? Thanks for watching Serger Tip Clips!

@@GailPatriceDesign yes! Thank you for the info.

No . A Coverstitch does a lot of cool stitches, but it doesn’t overlock edges. Thanks!

@@GailPatriceDesign Thank you very much! :)

@@starredout685 You're welcome!

Hi Trinette, This video isn't about binding. It's about hemming in the round. Are you using a binding attachment and what machine do you own? Let me know so I can help you.

@@GailPatriceDesign i am using a janome coverpro 2000cpx sewing polyester lycra (so it can be sublimated) size 0-3 mth onesies envelope using binding attachment. When i get to a very steep curve i have to stop sewing lift foot with needles in so i don’t skew the alignment and turn enough that the fabric can reach the binding without stretching so i dont cause puckering. But everytime i stop it skips stitches. Brand new needles (machine only allows 80 & 90 nothing else i do think 75 stretch would be better but this machine don’t make them). I can’t run continuously through its too round and small for that. I cant afford an industrial either.

@@Moneybags8989 you must leave one shoulder seam open when using a binder or else you’ll have the problems you’ve already had. Stitch slowly and keep the neckline touching the binding strip as it travels along. I do have 2 Tip Clips on binding. They will help you-thanks!

Hi Annette, that technique is included in my Coverstitch Workshop class. I don’t have a Tip Clip about it. Let me know if you need help and thanks for watching Serger Tip Clips!